Samsung SSC-21WEB User manual

COLOR QUAD OBSERVATION
SYSTEM
Installation Manual
SSC-21

1
Graphic Symbol Explanation
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence
of uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the appliance.
Warning - To Prevent Fire or Shock Hazard, Do Not Expose
This Monitor To Rain or Moisture.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION

2
IMPORTANT SAFEGUARDS
Caution
Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove
the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control
switches are at the front of the monitor).
1. Read Instructions : All the safety and operating instructions should be read before
the appliance is operated.
2. Retain Instructions : The safety and operating instructions should be retained for
future reference.
3. Heed Warnings : All warnings on the monitor and in the operating instructions
should be adhered to.
4. Follow Instructions : All operating and use instructions should be followed.
5. Cleaning : Unplug this monitor from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Exception. A monitor that is meant for uninterrupted service and that for some
specific reason, such as the possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the monitor in the cleaning
description otherwise required in Item 5.
6. Attachments : Do not use attachments not recommended by SAMSUNG as they
may cause hazards.
7. Water and Moisture : Do not use this monitor near water for example, near a
bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool and the like.
8. Accessories : Do not place this monitor on an unstable cart, stand, tripod, bracket,
or table. The monitor may fall, causing serious injury to a child or adult, and
serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by SAMSUNG, or sold with the monitor. Any mounting of the
monitor should follow SAMSUNG’s instructions, and should use a mounting
accessory recommended by SAMSUNG.

3
9. Ventilation : Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the monitor and to protect it from overheating, and
these openings should never be blocked by placing the monitor on a bed, sofa, rug,
or other similar surface. This monitor should never be placed near or over a
radiator or heat register.
This monitor should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or SAMSUNG’s instructions have been
adhered to.
10. Power Sources : This monitor should be operated only from the type of power
source indicated on the making label. If you are not sure of the type of power
supply to your installation site, consult your SAMSUNG dealer or local power
company.
11. Grounding or Polarization : For monitors equipped with a 3-wire grounding-type
plug having a third(grounding)pin. This plug will only fit into a grounding type
power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
12. Power : Cord Protection-Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where
they exit from the monitor.
13. Lightning : For added protection for this monitor during a lightning storm, or
when it is left unattened and unused for long periods of time, unplug it from the
wall outlet and disconnect the cable system. This will prevent damage to the
monitor due to lightning and power-line surges.
14. Overloading : Do not overload wall outlets and extension cords as this can result
in a risk of fire of electric shock.
15. Object and Liquid Entry : Never push objects of any kind into this monitor
through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the monitor.

16. Servicing : Do not attempt to service this monitor yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
17. Damage Requiring Service : Unplug this monitor from the wall outlet and refer
servicing to qualified service personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the monitor.
c. If the monitor has been exposed to rain or water.
d. If the monitor does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the monitor to its normal
operation.
e. If the monitor has been dropped or the cabinet has been damaged.
f. When the monitor exhibits a distinct change in performance-this indicates a need
for service.
18. Replacement Parts : When replacement parts are required, be sure the service
technician has used replacement parts specified by SAMSUNG or have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock or other hazards.
19. Safety Check : Upon completion of any service or repairs to this monitor, ask the
service technician to preform safety checks to determine that the monitor is in
proper operating condition.
4

FCC & ICES Information
Warning
This equipment has been tested and found to comply the limits for a class B digital
device, pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generate, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
User-Installer Caution
Your authority to operate this FCC verified equipment could be voided if you make
changes or modifications not expressly approved by the party responsible for
compliance to part 15 of the FCC Rules.
5

6
Contents
IMPORTANT SAFEGUARDS 2
1. System Components and Installation 7
1-1. SYSTEM Components 7
1-2. SYSTEM CONFIGURATION 8
1-3. Individual Component Installation 9
1-4. Basic System Installation 19
2. Connecting Peripheral Devices 20
2-1. To connect a PIR Sensor 20
2-2. To connect a VCR 20
3. System Overview 21
4. Part Names and Functions 22
4-1. Camera 22
4-2. Monitor 24
5. Setting Up the System 29
6. Specifications 34

7
1. System Components and Installation
1-1. System Components
✳If you have purchased only a monitor, you should directly purchase every component except
accessories.
STANDARD CAMERA
CAMERA HOUSING MOUNTING BRACKET
DOME CAMERA
CAMERA CABLE
CAMERA MOUNT BRACKET
ALARM CABLE INSTALLATION MANUAL POWER CORD
MONITOR
ACCESSORIES

1-2. SYSTEM CONFIGURATION
Model Name Quantity Note
Monitor SSC-21M 1 Color Quad Monitor
Standard Camera SSC-21C 3
Dome Camera SSC-21DC 1 Tapping Screw 2
Camera Housing MHG-110 1 SCREW 1, SPRING WASHER 1,
PLANE WASHER 1
Mounting Bracket SBR-120 1 Housing Assembly Screw 2
(hexagon socket head, cap screws)
L-WRENCH 1
PLASTIC ANCHOR 4
Screw 4 (for wall attachment)
Camera Mount Bracket SBR-110 3 Tapping Screw 3
Camera Cable MCB-60 4 60ft(1ft:0.3048m)
Installation Manual ACCESSORY 1
Power Cord ACCESSORY 1
Alarm cable ACCESSORY 1 Alarm cable(1.5m)
8
✳If you have purchased only a monitor, you should directly purchase every component except
accessories.

9
1-3. Individual Component Installation
1) INSTALLING STANDARD CAMERA (SSC-21C)
SSC-21C' s camera can be attached to the wall, ceiling or shelf using the camera mount bracket
(SBR-110).
• Choose an installation site that can sufficiently support the weight of the equipments to be
installed.
• Attach the camera mount bracket to the wall or ceiling using the supplied three screws
(M3 X L16).
• Adjust the camera to target the video location and tighten the bracket handle on the camera
mount bracket.
3 ✕ 12 sized
screws
wall or ceiling

10
2) INSTALLING DOME CAMERA (SSC-21DC)
• Remove the dome cover from the main body of the camera by turning the cover in a
counter clockwise direction with one hand while holding the body with the other.
• Connect the camera cable to the camera cable jack on the dome camera, then connect, and
the other end of the cable to the monitor's channel input jack.

• Attach the camera to the wall or ceiling using the supplied tap screws.
• Adjust the video location by swiveling the camera (PCB board) up and down, and adjust the
focus by turning the lens clockwise and counter clockwise.
• Put the dome cover back on the camera by rotating the cover clockwise.
✳ Caution: When removing or closing the dome cover, do not get dirt or dust on the cover.
11

12
3) CAMERA MOUNT BRACKET(SBR-110) & STANDARD CAMERA(SSC-21C)
! Overview
CAMERA MOUNT BRACKET (SBR-110) is used to attach the camera to a wall, ceiling or
shelf.
@ Installation
Explains the installation of CAMERA MOUNT BRACKET as wall as the installation of the
camera onto the CAMERA MOUNT BRACKET.
• Choose an installation site that can sufficiently support the weight of the equipments to be
installed.
• Attach the camera mount bracket to the wall using the supplied screws (M3 X L16).
• Adjust the camera to target the video location and tighten the bracket handle on the camera
mount bracket.
Install the camera on to the male screw of the Camera Mount Bracket by rotating the camera
in clockwise.

13
• Loosen the handle by turning it in a counter clockwise direction and then adjust the camera
position. Tighten the handle, turning it clockwise, and lock the camera in position.
• Connect the camera cable to the camera.
# Specifications
Use : Indoor
Installation : Wall or Ceiling
Dimensions : 52 ✕ 53 ✕ 97(W ✕ H ✕ D)
Weight : 150g
Operating Temperature : -10 °C ~ 50 °C
$ Accessories
SCREW (M3 ✕ L16) ---------- 3
Handle

14
4) MOUNTING BRACKET(SBR-120)
! Overview
MOUNTING BRACKET (SBR-120) is used to install camera housing to a wall.
@ Installation
• Choose an installation site that can sufficiently support the weight of the equipments to be
installed.
• Mark the mounting holes using the house mount bracket as a template, then drill pilot
holes (8 mm diameter, 45 mm depth), and then install and secure the plastic anchors.
At this time, cut away all exposed protrusions.
• Align the housing mount bracket over the plastic anchor holes, then firmly fasten the
tapping screws.
• Install the housing according to the following CAMERA HOUSING installation method.
# Specification
Use : Indoor
Installation : Wall
Dimensions : 75 ✕ 115 ✕ 240(W ✕ H ✕ D)
Weight : 500g
Operating Temperature : -10 °C ~ 50 °C
$ Accessories
Hexagon Socket Head Cap Screws ---------- 2
L- WRENCH ------------------------------------1
SCREW ------------------------------------------ 4
Plastic Anchor ----------------------------------- 4
Tapping Screw(M5 ✕J5) ---------------------- 4

15
5) CAMERA HOUSING(MHG-110)
! Overview
CAMERA HOUSING (MHG-110) is the equipment that protects the indoor camera from the
operating environment so that the camera may perform safely.
@ Installation
This section explains how to install the camera within the HOUSING and how to install the
CAMERA HOUSING (MHG-110) onto the MOUNTING BRACKET (SBR-120).
• Loosen the two screws located in the REAR CAP of CAMERA HOUSING, then detach
the COVER BODY by pushing it in the direction of arrow.
Cover Body
Rear Cap

16
• Loosen two screws from the CAMERA HOUSING PLATE and detach from HOUSING.
• Slide the spring washer and plain washer onto the supplied screw (1/4-20UNF), then
install the camera onto the camera housing plate.
• Insert one end of the cable to CABLE GROUND (PG-13.5), then pull that end of the cable
from the inside of HOUSING.
Camera Housing Plate

17
• Connect the cable to the camera, then set up CAMERA MOUNTING PLATE and the
camera in the appropriate place inside the HOUSING.
• Slide the camera body into the housing body in the direction of arrow, then install the two
supplied screws to the rear cap.
Camera Mounting Plate

• Use the supplied two screws and L-WRENCH to set up the CAMERA HOUSING onto
WALL MOUNT BRACKET.
• Use the supplied L-WRENCH to slightly loosen the hexagonal groove SCREW located at
the bottom of WALL MOUNT BRACKET by turning it counter clockwise, then position
the CAMERA HOUSING by tilting and swiveling, and tighten the hexagonal groove
SCREW by turning it clockwise.
#Specifications
Use : Indoor
Dimensions : 147 ✕100 ✕254(W ✕H ✕Dmm)
Weight : 1kg
Operating Temperature : -10 °C ~ 45 °C
$Accessories
SCREW(1/4-20UNF) --------- 1
SPRING WASHER ------------1
PLANE WASHER ------------ 1
18

19
1-4. Basic System Installation
Perform the following steps to install your system.
• Take the monitor out of the packaging box.
• Place the monitor where you would like to install it. Do not turn on power until installation is
complete
• Choose the place where you want to install the camera.
• Once the monitor and camera locations have been chosen, install the camera.
• Connect the cable to the jack on the back of the camera.
• Connect the other end to CAMERA IN on the back of the monitor.
(At this time, select the numbers and sequence of cameras.)
• Connect the camera you wish to install (as shown below).
• Connect the power cord between the monitor and the power outlet.
• When the Power switch on the front panel of the monitor is pressed, the equipment becomes
operational.
(Initially quad screen will be displayed.)
✳After the power has been turned on, the CRT needs approximately 20 seconds of stabilization
period.
✳The output signal of each camera can be used as an external input for another device.
✳Connect an alarm cable between the Alarm jack and a VCR.
(Alarm line: gray, Reset line: brown, GND: black)