Sangoma s705 User manual

1.
2.
Pairing Bluetooth Headset
Enabling Bluetooth
Press the Menu button
Use the arrow buttons to highlight the option, then press the buttonSetting Enter
Bluetooth is only supported on the Sangoma s705 IP Phone

3.
4.
Highlight the option and press the buttonBasic Setting Enter
Use the arrow buttons to highlight the option (near bottom of the list), then press the buttonBluetooth Enter

5.
6.
1.
By default bluetooth will be disabled.
To enable Bluetooth use the Switch button to toggle bluetooth On. Then press the buttonSave
The phone will save settings and enable Bluetooth
At this point, the Bluetooth feature is enabled but not paired with any bluetooth devices (as noted by the small red x).
To pair with a bluetooth device follow the next steps
Pairing with a Bluetooth Device
Verify that your bluetooth device is enabled in paring mode, then follow the below procedure

1.
2.
3.
Press the Menu button
Use the arrow buttons to highlight the option, then press the buttonSetting Enter
Highlight the option and press the buttonBasic Setting Enter

4.
5.
Use the arrow buttons to highlight the option (near bottom of the list), then press the buttonBluetooth Enter
Use the down arrow key and highlight , then press the buttonPaired Bluetooth Device Scan
The phone will now search for nearby bluetooth devices/headsets to pair with

6.
7.
Once you have selected the bluetooth device you wish to pair with, press the button Connect
The bluetooth device is now paired with the Sangoma phone, as noted by the blue checkmark beside the bluetooth device
The home screen will also indicate bluetooth connectivity with the bluetooth symbol

7.
1.
Disconnecting from a Bluetooth Device
Press the Menu button

2.
3.
4.
Use the arrow buttons to highlight the option, then press the buttonSetting Enter
Highlight the option and press the buttonBasic Setting Enter
Use the arrow buttons to highlight the option (near bottom of the list), then press the buttonBluetooth Enter

5. Using the arrow buttons highlight the bluetooth device you wish to disconnect from, then press the buttonDisconnect