Sanipex BAGNODESIGN BDS-TAO-450-XX User manual

BDS-TAO-450-XX
TAORMINA FREESTANDING WASH BASIN 440X440MM
www.sanipexgroup.com

IMPORT ANT PLEASE READ


            

         

         

 
           

   




         










 of 

Place the basin close to the wall, take notice of the spout length of the mixer so
that the distance X is correct.
X

Check that the waste provision is in the correct place, check the bottle trap
dimensions to ensure that the distance Y is achievable.
Install the waste assembly into the basin.
Y
Ø32mm

Install the bottle trap onto the waste.
Cut the horizontal pipe to length and install into the wall via a waste compression
fitting or rubber socket.
If required run a small bead of silicon around the perimeter base.

INSTALLATION COMPLETE!!!

Note:

INS-TAO-450-XX-09-21
www.sanipexgroup.com