Sanipex BAGNODESIGN REVOLUTION BDF-REV-V120-WH User manual

REVOLUTION VANITY
REVOLUTION WALL MOUNTED VANITY BASIN UNIT
www.sanipexgroup.com

Tools Required (Not supplied)
1
Carefully remove the cabinet from vanity.
2
Mark hole location on the wall for the brackets, then drill holes.
Tools
Required
(Not
supplied)

4
3
Fix the wall bracket with screws by using screw driver.
Tools
Required
(Not supplied)
Gently lift the cabinets into the position of that the cabinets
hangers sit onto the wall bracket, make sure with spirit level the unit
is in level and adjust if required.

a) Vertical adjustment.
b)In-De pth adjustment.
c) Anti-turn over locking, stop screwing the red bolt when it touches
the wall pla te.
5
Adjustments:
a
b
c
NOTE:
It is the responsibility of the customer to ensure that the wall is of
a suitable quality to hold the unit fixing in place & to use the proper
hardware fittings according to the construction of the wall.
a
bc

INSTALLATION COMPLETE
Gently put the drawer back into vanity unit .
7

Note:

INF-REV-VANITY-09-21
www.sanipexgroup.com