Sanremo F18 Datasheet

Sanremo F18 Installation & Quick Start Guide
Disclaimer: Installation must be performed by professional technician. Improper installation can void warranty, permanently damage equipment and/or present burn
& electrical hazard to installer/user. Consult with local municipality for official electrical and plumbing codes/guidelines.
Consult user manual for expanded installation, operation, and safety guidelines.
Dimensions
Water Requirements
Electrical Requirements
2 Group
3 Group
Receptacle & Plug Configuration
2 Group
3 Group

Connection & Counter Hole Diagrams
3” hole in counter recommended for passage of
electrical cord & water/drain lines.
Counter hole placement recommended to be
center of machine and 12.5” inward from edge of
the drip tray.
First start (boiler fill) procedure

Display readout
Pump adjustment
Prepare a portafilter with coffee at the desired dose/grind calibration and insert into the group. Turn group on by
selecting the continuous (SR logo) button, locate the pump adjustment knob and set your desired pump pressure
WHILST the group is extracting the coffee.

Adjusting water mix for hot water tap
Water mix valve located above machine drain
Programming menu is accessed by pressing and holding the lower ‘3 lines’ on display
Programming page 1

Programming page 2
Individual group cleaning mode