SARAH ELLISON Float Corner Modular User manual

sarahellison.com.aupage 1 | 4
FLOAT CORNER MODULAR
ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Sarah Ellison Float Corner Modular. This
document lists the contents included in your delivery. Please take the time to
identify the hardware, as well as the individual components of this product.
As you unpack and prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
HARDWARE
None
TOOLS REQUIRED
None
PEOPLE REQUIRED FOR
ASSEMBLY
Two people are recommended to place
this product
ESTIMATED TIME OF ASSEMBLY
10 minutes
CUSTOMER SERVICE
For Australian customer service contact : [email protected]
For any international customer service inquires please contact the retailer of purchase.

sarahellison.com.au page 2 | 4
STEP 1
STEP 2
Open box carefully, ensuring the blade of the knife does not come into
contact with the product.
Remove packaging and lift the product up out of box and gently place
on ground.

sarahellison.com.aupage 3 | 4
STEP 3
STEP 4
To connect the module pieces together to make a larger sofa, lift the side of the
sofa with the downwards facing tongue, align to the fixings on the next module
and drop into place.
Position in your room, and don’t forget to recycle the packaging where possible.

sarahellison.com.au page 4 | 4
CARE INSTRUCTIONS
With a little care you can prolong the life of your furniture. The following
information is only intended as a general guideline. Please follow the
instructions to ensure maximum longevity of your Sarah Ellison furniture.
• Vacuum textiles regularly with an upholstery attachment to remove dust
and dirt.
• Place textiles out of direct sunlight to help prevent fading. Dark colors
and cotton fabrics are particularly susceptible to sun.
• Have upholstered items professionally cleaned annually.
• Rotate, turn and flutt cushions periodically to promote uniform wear.
• In some cases, spot cleaning can cause a ring or fading. It is best to
have the entire piece or cushion casing cleaned by a professional
upholstery cleaning service to ensure uniform results.
• If you decide to spot clean on your own, check the standard cleaning
codes to determine the correct type of product to use.
• Blot spills immediately with a clean, dry white cloth. Always blot from
the outer edges inward to reduce the chance of a stain ring. Avoid hot
water, which can set a stain.