Satel Perfecta User manual

Keypad with touch keys

INT-KSG2R

Firmware version 2.02

USER MENU –PERFECTA 64 M

int-ksg2r_op_en 02/23

SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND

tel. +48 58 320 94 00

www.satel.pl

EN

IMPORTANT

Changes, modifications or repairs not authorized by the manufacturer shall void your rights

under the warranty.

Hereby, SATEL sp. z o.o. declares that the radio equipment type INT-KSG2R is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity

is available at the following internet address: www.satel.pl/ce

Factory default codes:

Service code: 12345

User 62 code: 1111

The following symbols may be used in this manual:

- note,

- caution.

CONTENTS

1. Introduction .......................................................................................................................2

2. LED indicators...................................................................................................................2

3. Display ..............................................................................................................................3

4. Keys..................................................................................................................................4

5. Using the touch keys.........................................................................................................4

6. Macro commands..............................................................................................................7

7. Keypad lock.......................................................................................................................7

2 INT-KSG2R SATEL

1. Introduction

Thank you for choosing this product by SATEL. Familiarize yourself with this manual before

you start using the keypad. This manual describes the keypad components and their

features. For description on how to use the keypad for control panel operation, please refer to

the user manual of the control panel to which the keypad is connected. Remember that this

keypad is operated with touch keys and gestures (e.g. swiping instead of pressing the arrow

keys).

Ask the installer for instructions on how to use your individually configured keypad.

The installer should also instruct you on how to operate the alarm system using the

INT-KSG2R keypad.

Fig. 1. INT-KSG2R keypad.

2. LED indicators

LED

Color

Description

yellow

flashing –trouble or trouble memory

green

ON –all the partitions operated by the keypad are armed

flashing –at least one partition is armed or exit delay countdown is

running

blue

ON –service mode is active and service menu is displayed

flashing –service mode is active but service menu is hidden or

displayed in another keypad

red

ON or flashing –alarm or alarm memory

SATEL INT-KSG2R 3

Information about the armed status may be hidden after a time period defined by the

installer.

The trouble information is hidden after arming. The installer defines if the trouble

information is hidden after just one of the partitions is armed in any mode or after all

partitions are armed in full mode.

If the Grade 2 option is enabled by the installer:

the LED indicates alarms only after entering the code,

flashing of the LED means that there is a trouble in the system, some zones

are bypassed, or there has been an alarm.

3. Display

The display provides information on the system state and allows you to operate and program

the alarm system. The installer defines the display backlight settings.

The display can operate in one the following modes:

normal mode,

screensaver mode.

The installer decides if the screensaver mode is available.

The messages about events that occurred in the alarm system are displayed regardless of

the operating mode.

Enter the code and press to open the menu. The arrow-shaped cursor indicates the

submenu you can enter / function you can start.

Normal mode

The following items are displayed:

date and time in format selected by the installer or keypad name (upper line),

names of macro command groups above the keys (if the installer configured macro

commands).

Touch to start the screensaver.

Screensaver mode

When the display operates in the normal mode, the screensaver can be started:

automatically (after 60 seconds of inactivity),

manually (touch ).

The installer defines the items to be displayed in the screensaver mode. This can be:

any text,

state of selected partitions (symbols),

state of selected zones (symbols or messages),

state of selected outputs (symbols or messages),

information on temperature from an ABAX / ABAX 2 wireless device,

date,

time,

keypad name,

4 INT-KSG2R SATEL

information on the power consumption of the appliance connected to the ASW-200 smart

plug.

Touch to end the screensaver.

4. Keys

Functions of keys

...

touch to enter digits (code, partition number, etc.)

touch and hold for 3 seconds to view the troubles

touch and hold for 3 seconds to turn on/off the keypad CHIME

touch to switch the display between the normal mode and the screensaver

mode

enter the code and touch to enter the user menu

enter the code and touch to arm the system in full mode [if the system is

disarmed and there is no alarm] or disarm the system and clear the alarm [if

the system is armed and/or there is an alarm]

touch and hold for 3 seconds to trigger the fire alarm

touch and hold for 3 seconds to trigger the medical alarm

touch and hold for 3 seconds to trigger the panic alarm

used for full arming

touch and hold for 3 seconds to terminate the exit delay countdown

used for night arming

touch and hold for 3 seconds to terminate the exit delay countdown

used for day arming

touch and hold for 3 seconds to terminate the exit delay countdown

used to disarm the system and clear the alarm

4 keys used to run macro commands (see: “Macro commands” p. 7)

Availability of the functions depends on the keypad settings.

The functions of keys in the user menu are described in the PERFECTA 64 M control panel

user manual.

5. Using the touch keys

Use the gestures described below.

SATEL INT-KSG2R 5

Touch

Touch the key with your finger.

Touch and hold

Touch the key and hold for 3 seconds.

Swipe up

Touch the keys area and slide your finger up to:

scroll up the list,

move the cursor up or left (depending on the function),

clear the character to the left of the cursor when editing,

exit the graphic mode.

6 INT-KSG2R SATEL

Swipe down

Touch the keys area and slide your finger down to:

scroll down the list,

move the cursor down,

change the letter case when editing,

exit the graphic mode.

Swipe right

Touch the keys area and slide your finger right to:

enter the submenu,

start a function,

move the cursor right,

enter the graphic mode.

SATEL INT-KSG2R 7

Swipe left

Touch the keys area and slide your finger left to:

exit the submenu,

move the cursor left,

enter the graphic mode.

6. Macro commands

The macro command is a sequence of actions to be performed by the control panel.

The macro commands make it easier to operate the alarm system. Instead of performing

several operations (e.g. in order to arm the selected partitions) you can run a macro

command, and the control panel will execute the functions assigned to the macro command.

Discuss with the installer which macro commands may best help you in your daily use of the

alarm system.

The installer can configure up to 4 groups of macro commands. 16 macro commands can be

assigned to each group. The keypad has 4 keys used to run macro commands.

The name of the group is displayed above the key.

Running a macro command

1. Touch . The list of macro commands that belong to this group will be displayed.

2. Swipe down to find the macro command you want to run. The currently selected macro

command is highlighted.

3. Touch to run the selected macro command.

The installer can assign to the group only one macro command that will be run directly

upon touching .

7. Keypad lock

Touch then to lock the touch keys. When the touch keys are locked you can clean the

keypad without the risk of accidentally starting a function.

Touch then to unlock the touch keys.

8 INT-KSG2R SATEL

Notes

...................................................................................................................................................

Satel PERFECTA User manual

Popular Keypad manuals by other brands