Satel CA-6 KLED-S User manual

®
KEYPAD
CA-6 KLED-S
ca6kled-s_e 03/06
The CA-6 KLED-S keypad is designed for operating and programming the CA-6 alarm
control panel. Information on the security system status is provided by 16 LED
indicators and acoustic signals. The keypad has 12 keys intended for entering data
and launching selected functions. The keys can be illuminated, and operations with
keys can be audibly acknowledged.
Fig. 1. View of the keypad.
LED indicators show the current status of 2 partitions and 8 zones of the control panel:
POWER (green color) – the LED indicates the control panel power status:
−ON – mains supply and battery OK,
−blinking – low battery,
−OFF – AC loss.
PHONE (green color) – LED ON indicates that the telephone line is occupied by
the control panel.
TROUBLE (yellow color) – blinking LED indicates there is a failure in the alarm
system.
ALARM - 2 LEDs (red color), designated "A" and "B", assigned to partitions –
alarm is signaled by the LED blinking. The LED goes out after alarm reset.
ARMED - 2 LEDs (green color), designated "A" and "B", assigned to partitions –
armed status is signaled by the LED ON. The blinking LED indicates the
countdown of the exit delay time.

SATEL CA-6 KLED-S2
1…8- (red color) LEDs indicating the status of system zones:
−ON – zone violated,
−blinking fast – alarm memory (the zone triggered alarm, but is not
violated any more),
−ON with a short extinguishment every 2 seconds – detector tamper
(2EOL zone type),
−flashing 2 every 2 seconds – tamper memory (detector was tampered -
2EOL zone type),
−blinking slowly – zone bypassed (indicated only with the partition
disarmed).
Some of the control panel states are additionally indicated by the following LED
combinations:
•[POWER] and [PHONE] LEDs blinking alternately - the control panel is in the
service mode;
•[POWER], [PHONE] and [TROUBLE] LEDs blinking simultaneously - the
control panel signals entering into the user functions menu;
•[POWER], [PHONE], [TROUBLE] and [ALARM] (both) LEDs ON - the
control panel performs the alarm memory display function;
•[TROUBLE] LED blinking, [POWER] and [PHONE] LEDs ON - the control
panel performs the trouble memory display function.
For further information regarding the installation and operation of the keypad please
refer to the INSTALLER MANUAL and USER MANUAL of the CA-6 alarm control panel.
Technical data
Nominal supply voltage (±15%).......................................................................... 12V DC
Average current consumption.................................................................................15mA
Operating temperature range ................................................................... -10°C…+55°C
Housing dimensions (width x height x thickness)...................................... 80x95x20mm
The latest EC declaration of conformity and product approval certificates
are available for downloading on the www.satel.pl website
SATEL sp. z o.o.
ul. Schuberta 79
80-172 Gdańsk
POLAND
tel. + 48 58 320 94 00
[email protected]
www.satel.pl