Sauder Pinwheel 421888 User manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-12
Français pg 13-14
Español pg 15-17
Lot # 507329 08/30/17
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Rolling Toy Box
Pinwheel Collection | Model 421888
WARNING
CHOKING HAZARD - Small Parts
Not for children under 3 years.
Adult assembly required.

Table of Contents Assembly Tools Required
3
4
5-12
13-14
15-17
18
19
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
421888 www.sauder.com/servicesPage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A END (1)
B ROPE END (1)
C LOWER PANEL (2)
D UPPER PANEL (2)
E BOTTOM (1)
Now you know
our ABCs.
421888www.sauder.com/services Page 3
A
B
C
D
C
D
E

Hardware Identification
åScrew is shown actual size. You may receive extra hardware with your unit.
421888 www.sauder.com/servicesPage 4
APPLIQUE CARD - 2
48P
ROPE - 1
131M
SWIVEL CASTER - 4
13CS HIDDEN CAM - 22
1F CAM DOWEL - 22 2F
WOOD DOWEL - 12
15F
BLACK 9/16" LARGE HEAD SCREW - 16
1S

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Push twenty-two HIDDEN CAMS (1F) into the ENDS (A
and B) and BOTTOM (E). Then, insert the metal end of a
CAM DOWEL (2F) into each HIDDEN CAM.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Arrow
1F
2F
(22 used)
Do not tighten the HIDDEN CAMS in this step.
1F
2F
Arrow
Arrow
1F
2F
A
B
E
421888www.sauder.com/services Page 5
CAUTION
This Rolling Toy Box
is NOT intended as
a ride on toy.

Step 2
å Fasten the SWIVEL CASTERS (13CS) to the BOTTOM (E).
Use sixteen BLACK 9/16" LARGE HEAD SCREWS (1S).
421888 www.sauder.com/servicesPage 6
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
1S
E
13CS
13CS
Surface
with
HIDDEN
CAMS
A tracking label will
be on this surface.
Please do not remove.

Step
421888www.sauder.com/services Page 7
Step 3
å Fasten the ENDS (A and B) to the BOTTOM (E). Tighten
four HIDDEN CAMS.
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
A
B
E
Surface with HIDDEN CAMS
Surface
with
HIDDEN
CAMS
Surface without
HIDDEN CAMS
Rounded edge
Rounded edge

Step
å Insert four WOOD DOWELS (15F) into one of the
LOWER PANELS (C).
å Fasten the ENDS (A and B) and BOTTOM (E) to the
LOWER PANEL (C). Tighten seven HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the LOWER
PANEL insert into the ENDS.
Step 4
421888 www.sauder.com/servicesPage 8
Arrow
Minimum
190 degrees
Maximum
210 degrees
A
B
E
C
15F
15F
Surface
with holes
Finished edge

å Insert four WOOD DOWELS (15F) into the other
LOWER PANEL (C).
å Fasten this LOWER PANEL (C) to the ENDS (A and B)
and BOTTOM (E). Tighten seven HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the LOWER
PANEL insert into the ENDS.
Step 5
421888www.sauder.com/services Page 9
A
B
E
Arrow
Minimum
190 degrees
Maximum
210 degrees
15F
15F
C
Surface
without
holes
Finished edge

Step 6
å Carefully stand your unit upright.
å Insert four WOOD DOWELS (15F) into the UPPER PANELS (D).
å Fasten the UPPER PANELS (D) to the ENDS (A and B). Tighten
four HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the UPPER PANELS
insert into the ENDS.
421888 www.sauder.com/servicesPage 10
A
B
D
D
15F
Arrow
Minimum
190 degrees
Maximum
210 degrees
Surface with holes
Surface without holes
Rounded edge
Rounded edge
15F