Schlage D-Series User manual

Extra Heavy Duty Commercial
D-Series locks are for commercial, institutional and industrial
use, such as schools, hospitals and factories, where a long life of
dependable operation must be combined with a high degree
of resistance to physical abuse.
Popular functions of all lever designs are also available in
Vandlgard ®, where levers are free-wheeling in the locked
position to resist more forceful attacks.
On our cover, the D-Series OMEGA in Satin Nickel.
Performance Features
Tested to exceed 3,000,000 cycles, greatly exceeding the 800,000 cycle ANSI
Grade 1 requirement.
Exceeds ANSI A156.2 Series 4000 Grade 1 locked lever torque requirements.
Vandlgard®functions have free-wheeling levers to resist force when locked.
Independent heavy duty spring cages for effective lever support.
Thru-bolted mechanism for positive interlock to door.
Concealed mounting screws.
Steel Latchbolt.
Cylinders 8
Designs & Finishes 4
Door Preparation 3
Door Handing 12
Exploded View 2
Functions 6 - 7
How to Order 13
Interchangeable Cores 8 - 9
Latches 10
Performance Features 2
Specifications 3
Strikes 11
Vandlgard®Features 5
Wiring for Electrified Locks 12
INDEX
2
Exploded View
Cylinder
6-Pin Everest Standard
Outside lever
Rose
Outside Spring Cage Assembly
Chassis
Adjusts for 1 5/8˝ - 2 1/8˝ thick doors
Anti-rotation Plate
Inside Spring Cage Assembly
Integrated spindle/springcage reduces lever
wobble and droop
Springcage Screws
Rose
Inside Lever
Latch
1/2˝ Throw
Latch Screws
Strike Screws
Strike
Push-Turn Button (Certain Function)
Provides visible locking status

3
Specifications
Handing:
All D-Series lever locksets are non-handed.
Door Thickness:
1⅝˝ to 2⅛˝ (41mm–54mm) standard including
Vandlgard®functions. 1¾˝ - 2˝ for function D85.
See accessories (Page 11) for spacers required
for 1³⁄8˝ doors.
Backset:
2³⁄₄˝ (70 mm) standard. 2³⁄8˝, 3¾˝ and 5˝(60 mm, 95 mm,
127 mm) optional.
Faceplate:
Brass, bronze or stainless steel. 1⅛˝ x 2¼˝
(29 mm x 57mm) square corner, beveled.
Lock Chassis:
Zinc plated for corrosion resistance.
Latch Bolt:
Steel, ½˝ (12mm) throw, deadlocking on keyed and
exterior functions. ³⁄₄˝ (19 mm) throw anti-friction latch
available for pairs of fire doors.
Exposed Trim:
Levers: Pressure cast zinc, plated to match finish symbols.
Roses: Solid brass.
Strike:
ANSI curved lip strike 1¼˝ x 4⅞˝ x 1³⁄₁₆˝ lip to center
standard. Optional strikes, lip lengths and ANSI strike
box available. See page 12.
Cylinder & Keys:
6-pin Everest C123 keyway standard with two patented
nickel silver keys per lock.
Keying Options:
Interchangeable core and Primus®high security cylinders.
Master keying, grand master keying and construction
keying.
Warranty:
Seven-year limited for all functions including
Vandlgard®.
Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1
Accessibility Code.
Federal
Meets FF-H-106C Series 161.
California State Reference Code (CSFH)
(Formerly Title 19, California State Fire Marshal Standard)
All levers with less than ½˝ (64mm) returns comply;
levers return to within ½˝ of door face.
MEA Certification
All electrified locking (fail-safe, unlocked by switch or
power failures) functions accepted for use in New York
City by the City of New York, Department of Buildings
(MEA 24-04-E).
All levers with less than ½˝ (64mm) returns comply with
California Fire Safety Codes.
3/4˝ and 1/2˝ throw latch approved for Hurricane
Resistance with Miami-Dade County, Florida and
the Florida Building Commission.
UL / cUL:
All locks listed for A label single doors, 4´ x 8´.
Letter F and UL symbol
Door Preparation
2-1/4"
57mm
2-3/4"
70mm
5/16" dia.
8mm
1" dia
25mm 2-1/8"
54mm
1-1/8"
29mm
2-3/4"
70mm
Lever Designs

4
Lever Designs & Finishes
ATHENS
Symbol: ATH (L-Series 07)
Material: Pressure cast
zinc lever; wrought brass rose
Finishes:
605, 606, 612,
613, 619, 625,
626
RHODES
Symbol: RHO (L-Series 06)
Material: Pressure cast
zinc lever; wrought brass rose
Finishes:
605, 606, 612,
613, 619, 625,
626
SPARTA
Symbol: SPA (L-Series 17)
Material: Pressure cast
zinc lever; wrought brass rose
Finishes:
605, 606, 612,
613, 619, 625,
626
Lever Designs & Finishes
606
612
626
Finishes
605 Bright Brass
606 Satin Brass
612 Satin Bronze
613 Oil Rubbed Bronze
619 Satin Nickel
625 Bright Chromium Plated
626 Satin Chromium Plated
Keyed functions available with Small Format Interchangeable Core options.
TACTILE WARNING
(KNURLING)
Change symbol designation as follows:
8ATfor Athens
8RO for Rhodes
8SP for Sparta
8TR for Tubular*
Only outside lever is knurled unless
otherwise specified.
Not available with Omega trim
Extended Factory Lead Time
OMEGA
Symbol: OME (L-Series Omega)
Material: Pressure cast
zinc lever; wrought brass rose
Finishes:
605, 606, 612,
613, 619, 625,
626
605
Bright Brass
606
Satin Brass
612
Satin Bronze
613
Oil Rubbed
Bronze
619
Satin Nickel
625
Bright Chromium
Plated
626
Satin Chromium
Plated
TUBULAR (L-Series 03)
Symbol: TLR
Material: Pressure cast
zinc lever; wrought brass rose
Finishes:
605, 606, 612,
613, 619, 625,
626
626
619
Keyed functions available with Full Size Interchangeable Core options.
*Only available with Tubular lever.
*

5
D-Series Vandlgard levers comply with ADA requirements.
Schlage D-Series keyed lever locks with Vandlgard provide vandal resistant technology.
Designed for maximum accessibility, security and durability,Vandlgard sets the standard for
door hardware in educational facilities and other applications subject to heavy traffic or abuse.
The unique features of Vandlgard prevent damage to internal lock components caused by
excessive force from persons kicking, hitting or standing on the lever to gain access. Vandlgard
functions maintain total key system and architectural design compatibility with Schlage’s
regular D-Series cylindrical locks.
Levers have virtually replaced knobs in the marketplace for handicap accessibility. The added
grip and leverage has created an increased opportunity for abuse or vandalism. This abuse often
renders locks inoperable. In some cases the security of the door is violated leaving computer and
laboratory equipment susceptible to theft. While this type of abuse is commonly associated with
junior and senior high schools, it also occurs in universities, office buildings, commercial
buildings, and public buildings.
D-SERIES VANDLGARD™
WIT H
Inner spindle operates
independently of lever when locked
Locked lever freely rotates
up and down while remain-
ing securely locked. The
Vandlgard function also
increases resistance to over-
rotation of the lever.
Benefits & Features
Superb warranty.
All Vandlgard functions have a 7-year warranty.
Reduce lever wobble and play.
Integrated spindle and spring cage greatly reduces lever sag and
wobble.
Resists vandalism.
Free-wheeling lever eliminates the ability to stand or exert
excessive force on the end of the lever.
Ease of installation.
Installs in under 2 minutes.

6
Functions
ANSI A156.2 Series 4000 Grade 1
SCHLAGE ANSI
Non-Keyed Locks
ND10S F75 Passage Latch
Both levers always unlocked.
ND50PD F82 Entrance/Office Lock †
Push-button locking. Push-button
locks outside lever until unlocked
with key or by turning inside lever.
ND53PD F109 Entrance Lock †
Turn/push-button locking; pushing
and turning button locks outside lever,
requiring use of key until button is
manually unlocked. Push-button
locking; pushing button locks outside
lever until unlocked by key or by
turning inside lever.
ND60PD F88 Vestibule Lock †
Latch retracted by key from outside
when outside lever is locked by key in
inside lever. Inside lever is always
unlocked.
ND66PD F91 Store Lock † *
Key in either lever locks or unlocks
both levers.
ND70PD F84 Classroom Lock †
Outside lever locked and unlocked by
key. Inside lever always unlocked.
ND73PD F90 Corridor Lock †
Locked or unlocked by key from
outside. Push-button locking from
inside. Turning inside lever or closing
door releases button. When outside lever
is locked by key it can only be unlocked
by key. Inside lever is always unlocked.
ND12D F89 Exit Lock
Outside lever always fixed. Inside
lever always unlocked.
ND12DEL Electrically Locked (Fail Safe)
Outside lever continuously locked
electrically.Unlocked by switch or
power failure. Auxiliary latch
deadlocks latchbolt when door is
closed. Inside lever always free for
immediate exit.
SCHLAGE ANSI
Keyed Locks
† Keyed functions available with 6-pin (PD/LD),
SFIC(GD/BD), or FSIC(RD/JD) cylinder.
*Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
Safe School Locks
ND12DEU Electrically Unlocked (Fail
Secure)
Outside lever continuously locked
until unlocked by electric current.
Auxiliary latch deadlocks latchbolt
when door is closed. Inside lever
always free for immediate exit.
ND25D Exit Lock
Blank plate outside. Inside lever
always unlocked.
ND40S F76 Bath/Bedroom Privacy Lock
Push-button locking. Can be opened
f rom outside with small screwdriver.
Turning inside lever or closing door
releases button.
ND44S Hospital Privacy Lock
Push-button locking. Unlocked
f rom outside by turning emergency
turn-button. Turning inside lever or
closing door releases button.
ND170 Single Dummy Trim
Dummy trim for one side of door.
Used for door pull or as matching
inactive trim.
ND75PD Classroom Security Lock †
Key in either lever locks or unlocks
outside lever. Inside lever is always
unlocked.

7
Functions
ANSI A156.2 Series 4000 Grade 1
† Keyed functions available with 6-pin (PD/LD),
SFIC(GD/BD), or FSIC(RD/JD) cylinders.
*Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
** 85 function locks are not available in Full Size
& Small Format Interchangeable Cores.
ND80PD F86 Storeroom Lock †
Outside lever fixed. Entrance by key
only. Inside lever always unlocked.
ND80PDEL Electrically Locked (Fail Safe) †
Outside lever continuously locked
electrically.Unlocked by key outside
or by switch or power failure.
Auxiliary latch deadlocks latchbolt
when door is closed. Inside lever
always free for immediate exit.
ND80PDEU Electrically Unlocked (Fail
Secure) †
Outside lever continuously locked
until unlocked by key or electric
current. Auxiliary latch deadlocks
latchbolt when door is closed. Inside
lever always free for immediate exit.
ND82PD F87 Institution Lock † *
Both levers fixed. Entrance by key in
either lever.
SCHLAGE ANSI
Keyed Locks
ND91PD F82 Entrance/Office Lock †
Push-button locking. Push-button
disengages outside lever until
unlocked with key or by turning
inside lever.Vandlgard is designed to
disengage outside spindle from latch
when in locked condition.
ND92PD F109 Entrance Lock †
Turn/push-button locking; pushing
and turning button disengages outside
lever, requiring use of key until button
is manually unlocked. Push-button
locking; pushing button disengages
outside lever until unlocked by key or
by turning inside lever.Vandlgard is
designed to disengage outside spindle
f rom latch when in locked condition.
ND93PD F88 Vestibule Lock †
Latch retracted by key from outside
when outside lever is disengaged by
key in inside lever. Inside lever is
always unlocked. Vandlgard is
designed to disengage outside spindle
f rom latch when in locked condition.
ND94PD F84 Classroom Lock †
Outside lever disengaged and
unlocked by key. Inside lever always
unlocked. Vandlgard is designed to
disengage outside spindle from latch
when in locked condition.
ND96PD F86 Storeroom Lock †
Outside lever always disengaged.
Entrance by key only. Inside lever
always unlocked. Vandlgard is
designed to disengage outside spindle
f rom latch when in locked condition.
SCHLAGE ANSI
Vandlgard Functions
ND96PDEL Electrically Locked (Fail Safe) †
Outside lever continuously
disengaged electrically.Unlocked by
key outside or by switch or power
failure.Auxiliary latch deadlocks
latchbolt when door is closed. Inside
lever always free for immediate exit.
Vandlgard is designed to disengage
outside spindle from latch when in
locked condition.
ND96PDEU Electrically Unlocked (Fail Secure) †
Outside lever continuously disengaged.
until unlocked by key or electric
current. Auxiliary latch deadlocks
latchbolt when door is closed. Inside
lever always free for immediate exit.
Vandlgard is designed to disengage
outside spindle from latch when in
locked condition.
ND85PD Faculty Restroom Lock **
Outside lever fixed. Entrance by key
only. Push-button in inside lever
activates visual “occupancy”
indicator, allowing only emergency
master key to operate. Turning inside
lever or closing door releases visual
occupancy indicator. Rotation of
inside spinner-button provides
lock-out feature by keeping indicator
thrown.
ND95PD Classroom Security Lock †
Key in either lever locks or unlocks
outside lever. Inside lever is always
unlocked.
Safe School Locks

8
Full Size Interchangeable Core
Schlage®figure-8 interchangeable core (IC) locksets allow
immediate rekeying at the door simply by using a special
control key to replace the core.
Primus®High Security Cylinders
Primus high security cylinders are available to add patented key
control and varying degrees of geographical exclusivity to most
Schlage 6-pin key systems, whether Everest or Classic keyways.
In addition to a conventional pin tumbler mechanism, Primus
cylinders incorporate a patented finger pin and sidebar design
providing a “dual-locking” cylinder that is virtually pick-
proof. Resistance to drilling and other physical attack is
optional by specifying 20-500 Series UL437 Listed cylinders.
Classic Primus cylinders are recommended for upgrading
existing Classic key systems. Due to its extended patent life, the
newly designed Everest Primus is recommended for new key
systems and for upgrading existing Everest®key systems. Specify
keyway to differentiate between Everest and Classic. Example:
CP (Classic) vs. C123 (Everest).
Cylinder for Most Functions
Levers Description
23-065 6-Pin conventional (standard)
20-765 Primus high security
20-565 Primus UL437 Listed high security
23-000 Hotel cylinder
N123-042 Temporary construction plug, plastic for functions
Standard Cylinders*
*Available in 606 and 626 finish only. Everest C123 keyway standard.
Tailpiece is vertical (shown) for
levers.
Standard Cylinders
Schlage®locks are provided with cylinders precision built to
extremely close tolerances and the highest standards of accuracy.
Using only solid brass plugs, extruded brass shells, phosphor
bronze springs, nickel silver keys and pins, ensures long life
and ease of operation. For complete listing of cylinder parts,
refer to the New D-Series Service Manual (SC-2058).
Conventional cylinders are available in Classic keyways or
in patented Everest®keyways. Specify keyway
to differentiate between Everest and Classic. Example:
C (Classic) vs. C123 (Everest).
Available in all lever designs, full size interchangeable cores
can be integrated into any 5 or 6-pin Schlage key.
To order complete locks with full size cores, change suffix
f rom PD to RD. Example: ND53RD. To order locks less core,
change suffix to JD. To order with full size construction core,
change suffix to TD.
Number Description
23-030 Conventional core
20-740 Primus high security core
Full Size Interchangeable Cores*
*Available 606 and 626 finish only. Everest C123 keyway standard.
Driver
N123-127

9
Small Format Interchangeable Core
Available in all lever designs, the small format IC
option is designed for Schlage Everest®B Family Restricted
keyway cores and is also completely compatible with Best®,
Falcon®, and other small format interchangeable cores.
To order complete locks with Everest B Family Restricted
keyway cores, change product suffix from PD to GD and
provide letter of authorization from end user. Example:
ND53GD. To order locks less core, change suffix to BD.
To order with keyed brass construction cores, change suffix
to HD. To order with disposable plastic construction cores,
change suffix to BDC.
Number Description
80-036 7-Pin uncombinated Everest B Family Restricted keyways
80-037 7-Pin combinated Everest B Family Restricted keyways
80-043 6-pin uncombinated Falcon / Best keyways
80-033 7-pin uncombinated Falcon / Best keyways
M204-152* Disposable plastic construction core
N523-091 SFICDriver
Small Format Interchangeable Cores
Small Format Core
Available 606 and 626 finish only. Specify keyway for existing systems.
80-033 and 80-043 cores are available in Best A, D, E, F, G, H, J, K, L, and M
keyways. Specify keyway by suffixing “B” to keyway letter, e.g. “AB”.
80-036 and 80-037 Restricted keyway cores require a letter of authorization
f rom the end user. Schlage assigns the keyway when establishing new
Everest Restricted key systems.
*M204-152 does not have a finish option.
Disposable Construction Core
N523-091

10
2³⁄₈˝1¹⁄₈˝(29mm) x 2¹⁄₄˝(57mm) square corner 14-047 –
60mm 1” (25mm) x 2¹⁄₄˝(57mm) square corner 14-048 –
1¹⁄₈"(29mm) x 2¹⁄₄" (57mm) square corner 13-047 13-048
2³⁄₄˝
1¹⁄₈˝ (29mm) x 2¹⁄₄˝(57mm),
³⁄₄˝(19mm) throw for pairs of fire doors
3³⁄₄˝
1¹⁄₈˝(29mm) x 2¹⁄₄˝(57mm) Square corner 14-028 14-010
Deadlatch Springlatch
³⁄₄”Throw Anti-Friction Deadlatch for Pairs of Fire Doors
Latches
Backset Description Deadlatch Springlatch
¹⁄₂˝Throw ¹⁄₂˝Throw
70mm
95mm
Reinforcement
Sleeve
Long Backsets
D-Series locks with 5˝ backsets are normally furnished with
1⅛˝ faceplates and 1˝ housings. Links installed in metal doors
require one A501-567 sleeve and 43-005 (order separately) to
join latch and link.
Sleeve (A501-567)
(add to 2³⁄₄”
backset
latch)
13/4˝ doors (A501-566) or
13/8˝ doors (A501-565)
Door Reinforcement
Schlage 37-001 reinforcing kit is used to
reinforce and help prevent the collapse of
hollow metal doors when locksets are
tightly mounted.
This kit should be used with long backsets for D-Series lock
installations in hollow metal doors to prevent lateral
movement of the latchbolt. Specify door thickness, 1⅜˝
or 1¾˝, when ordering reinforcement kits.
Reinforcement Kit
(37-001)
14-042 _
(A501-567)
Strikes
All Schlage strikes are furnished complete with screws.
The standard D-Series strike has a 1³⁄₁₆˝ lip.
When ordering separately specify quantity, product number,
f inish, and lip length. Standard strikes are shown in bold type.
Square Corner Box Strike
(10-013)
1 1/8 ˝ x 2 3/4 ˝ x 3/32 ˝
ANSI Strike–Standard
(10-025)
11/4 ˝ x 4 7/8 ˝ x 3/32 ˝
Rabbeted Latch
and Strike Kit
(39-030)
Rabbeted Latch and Strike Kit
Rabbeted latch and strike kit finishes: 605, 626.
This kit adapts square corner latches and 23/4˝(28mm) high
strikes for ½˝(13mm) rabbeted door and frame preparations.
Strikes
Number Lip Length Description
10-013 1 1/8˝ (28mm) 1 1/8˝ x 2 3/4˝ (28mm x 70mm) Square corner, box
1 3/4˝ (38mm)
10-016 1 1/8˝ (28mm) 1 1/8˝ x 2 3/4˝ (28mm x 70mm), 3/4˝ (19mm) deep
box for 14-042 fire door latch
10-025 1 3/16˝ (30mm) 1 1/4˝ x 4 7/8˝ (32mm x 124mm) ANSI
1 3/8˝ (35mm)
K510-066 — Box for 10-025 ANSI strike
Latches
D-Series latches are adjustable for flat or beveled edge doors.
Latches and strikes are furnished in brass, bronze, or chrome
f inishes to be compatible with lock trim. When ordering,
specify quantity, part number, and finish. All D-Series latches
have ½˝ throw and 1˝housings except 2⅜˝ backset latches,
which includes sleeve G506-815 to fill a 1˝ edge bore.
Standard latches are shown in bold type.
G506-815
Extension
Link
(43-005)
2-3/4˝ Latch

Door Handing
All Schlage®locks are reversible. Hand information is
necessary to ensure proper finish of latchbolt and strike
for split-finish locks. Follow the diagram to determine
the hand of the door. The outside is the secure side or the
corridor side.
LH
Left Hand
INSIDE
OUTSIDE
OUTSIDE
INSIDE
LRB
Left Hand
Reverse Bevel
RH
Right Hand
RRB
Right Hand
Reverse Bevel
11
DC Power Source – EL or EU
Switch
(Not Furnished)
Transformer
(Not Furnished)
Typical Wiring Diagram for Electrified Locks
AC Operation
Rectifier
To Lock
Plug
Rectifier used on AC operation unit only.
.35A @ 24V (Current requirements per lock)
24V AC 115V AC
Switch
(Not Furnished)
DC Operation
To Lock
.15A @ 24V (Current requirements per lock)
AC and DC Application
Solenoid Rectifier
Cut as close to plug as
possible for DC operation.
Plug into solenoid
for AC operation.
Discard for DC operation.
24V DC
AC Power Source – EL or EU
1-3/ 8˝ D-Series Lever Door Spacer*
Accessories
XN12-012
*For installation on 1 ³⁄₈”doors, two (2) spacers are required. Specify finish.

Line Outside Inside Door
Item Des Fin Des Fin Thickness
1 24 ND10S SPA 605 10-013 214 EE
2 4 ND50RD RHO 613 138 C145 245793
3 60 ND93PD ATH 626 14-047 E 000000
Note: Schlage order forms are available at no charge at www.schlage.com/pricing/pricing.htm.
How to Order D-Series Levers
To order Schlage®products, descriptive data should be in the same sequence as shown.
Line Outside Inside Door
Item Des Fin Des Fin Thickness
12 3 4567 8 910 11 12 13 14
Product
Qty Latch
Hand Strike Additional Details
Dim
Ext
Product
Qty Latch
Hand Strike Ext Additional Details
Dim
EXAMPLE
1Line item number
2Quantity
3Complete model number with function and cylinder type
4 / 5 Outside design / finish. Specify tactile warning (knurling) here as “8AT” for Athens®, “8RO” for Rhodes®or “8SP”for Sparta®.
6 / 7 Inside design / finish. Leave blank if same as outside.
8 Hand. Required for keyed knob designs and all split finish locksets. One hand per line item.
9 Latch. Leave blank for standard or specify part number for optional latch. LLL=Less Latch.
10 Strike. Leave blank for standard or specify part number for optional strike. LLL=Less Strike.
11 Door thickness, if non-standard. Example: 200 = 2˝.
12 Extension, to specify whether thick door is extended inside (EI), outside (EO), differently (ED) or equally (EE).
13 Dimension for strike lip lengths. See strike page for availability of specific dimensions with specific strikes.
100 = 1˝
118 = 1⅛˝
114 = 1¼˝
138 = 1⅜˝
112 = 1½˝
134 = 1¾˝
200 = 2˝
14 Keying detail (e.g. key symbol, keyway, bitting) and other special requirements.
To order cylinder options, change “PD” at the end of the model number as follows:
ND53PD Standard.
ND53LD Less standard cylinder. For Primus®cylinder, specify this option and order Primus cylinder separately.
ND53CD With temporary plastic construction cylinder. Double cylinder functions ordered less cylinder are
furnished with these construction cylinders to maintain timing of key cams.
ND53JD Prepared for full size interchangeable core, less core. For Primus core, specify this option and order
Primus core separately.
ND53RD With full size conventional interchangeable core installed. Order control keys separately.
ND53TD With full size (temporary) construction core installed. Order all keys separately.
ND53BD Prepared for small format (Falcon®, Best®, etc.) interchangeable core (SFIC), less core.
ND53GD With Everest®B Family restricted keyway small format core installed. Order control keys separately.
ND53HD With small format keyed brass construction core installed. Order all keys separately.
ND53BDCWith small format disposable plastic construction core installed.
12

13

14

15

Administrative Offices
111 Congressional Blvd.,
Suite 200
Carmel, IN 46032
[phone]
FAX [phone]
Commercial Customer Service
2315 Briargate Parkway, Suite 700
Colorado Springs, CO 80920
[phone]
FAX [phone]
Order Entry
FAX [phone]
Canada / Latin America /
Caribbean / Mexico
IR Security & Safety
1076 Lakeshore Road East
Mississauga, Ontario
L5E 1E4, Canada
[phone]
[phone] FAX
[phone]
China
IR Security & Safety
7F, Xuhuiyuan Building, 1089 Zhong Shan
Nan 2 Road
Shanghai 200030, P.R.China
+(86) 21 5452-9898
+(86) 21 5410-1110 FAX
www.irco.com.cn
Internet
http://www.schlage.com
Fax-On-Demand
[phone]
©2005 Ingersoll-Rand Form MS-M/D REV. 04/05 Printed in USA
Schlage
111 Congressional Blvd., Suite 200
Carmel, IN 46032
800-847-1864
800-452-0663 Fax
www.schlage.com
Australia / NZ
IR Architectural Hardware Ltd.
P.O. Box 19-347
437 Rosebank Road,
Avondale, Auckland, New Zealand
[phone]
[phone] FAX
www.irarchitecturalhardware.co.nz
Europe/Middle-East/Africa
IR Security and Safety Ltd.
Bescot Crescent
Walsall, West Midlands WS1 4DL
United Kingdom
[phone]
[phone]
www.irsecurityandsafety.co.uk
North-East Asia
IR Security & Safety
23/F, 625 King's Road
Northpoint, Hong Kong
+(852) 2235-0600
+(852) 2565-1409 FAX
South Asia
Ingersoll-Rand South East Asia (Pte) Ltd.
42 Benoi Road
Singapore 629903
[phone]
[phone] FAX