Sealey APIC1800F User manual

INSTRUCTIONS FOR:
FULL HEIGHT INDUSTRIAL CABINET
MODEL No: APIC1800F
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. INTRODUCTION
3. CONTENTS
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using this cabinet.
Locate cabinet in a suitable work area.
Keep the work area clean, uncluttered and ensure there is
adequate lighting.
WARNING! Use cabinet on level and solid ground,
preferably concrete.
Keep the cabinet clean and tidy in accordance with good
workshop practice.
Keep children and unauthorised persons away from the work
area.
DO NOT use the cabinet for any purpose other than that
for which it is designed.
DO NOT use the cabinet outdoors.
DO NOT place the cabinet in a damp or wet location or an
area where there is condensation.
DO NOT clean the cabinet with any solvents which may
damage the surfaces or the protective coating.
 DO NOT move the cabinet when there are items placed
inside.
 DO NOToverload the cabinet.
Industrial quality, double door, free standing cabinet. Durable,
scuff resistant design. Reinforced steel doors with zinc plated
locking bars provide 3 point locking mechanism. Supplied with
two coded keys. Ideal for home, ofce, garage or workshop use.
Dimensions:
Overall Width: 900mm, Depth: 450mm, Height: 1800mm.
Internal Width: 850mm, Depth: 420mm, Height: 1710mm.
Unpack the contents of the box and check against the
parts list/diagram. If there are any parts missing,
contact your local Sealey dealer.
Part No. Part Name No. of
A1 Rear Panel 1
A2 Rear Panel 1
B1 Left Side Panel 1
B2 Right Side Panel 1
C1 Left Door 1
C2 Right Door 1
D Top 1
E Bottom 1
F Inner Face Plate 1
G Outer Face Plate 1
J Plastic Stop 4
K Locking Pin Locator 2
L Hinge Pin Locator 4
M Screw 18
N Hinge Pin 4
Original Language Version APIC1800F Issue: 1 - 09/08/12
© Jack Sealey Limited

4.1. Assemble the cabinet following the numbered sequence below, referencing the parts list and diagram overleaf.
Use a trestle table or a workbench for convenience if required.
4. ASSEMBLY
Original Language Version APIC1800F Issue: 1 - 09/08/12
© Jack Sealey Limited

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
[e-mail]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business
Park, Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version APIC1800F Issue: 1 - 09/08/12
© Jack Sealey Limited