
FOAM GUN FOR EXPANDING FOAM
CARTRIDGES
MODEL NO: FG001
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9Always read the foam and cleaner manufacturers’ instructions when handling and using their product in conjunction with this gun.
9Only use the gun in adequately ventilated rooms with the correct respiratory protection equipment
9 Manyfoamproductscontainhighlyinammablechemicals,DO NOTuseintheproximityofanyopenames,cigarettesoranyother
potentialcauseofcombustion
9 Alwayswearapprovedsafetyclothingandpersonalprotectionequipment:gloves,gogglesforeyeprotection,amaskwiththe
appropriateactivatedcarbonlterswhenworkingwiththefoamgun.
9Keep the gun out of the reach of children.
9 Maintaintheguningoodcondition.Replaceorrepairdamagedparts.Userecommendedpartsonly.Unauthorisedpartsmaybe
dangerous and will invalidate the warranty.
9 Keepchildrenandunauthorisedpersonsawayfromtheworkarea.
9Avoid unintentional operation.
8DO NOTholdgunorattachmentsclosetoyourface(especiallyeyes,ears,etc.)andDO NOT point gun at other persons or animals.
8DO NOT use the gun for any purpose other than that for which it is designed.
8DO NOT operate the gun if damaged.
9 Whennotinusestoreinasafe,dry,childproofarea.
2. INTRODUCTION
Atopqualitymetalgunforusewithgungradepolyurethaneexpandingfoams.Screwsontothecanisterforquickandeasyapplication.Easy
foamgunforexpandingfoamadjustableowcontrol.Stainlesssteelbarrelandneedle.
3. SPECIFICATION
Model No.: .................................................................. FG001
4. OPERATION
4.1. Alwaysinspectthegunbeforeusetoensureitisnotdamaged.If
indoubtdonotusethegunandcontactyourSealeyStockist.
4.2. Shakecanvigorouslyfor30secondspriortoinstallingontofoamgun.
4.3. Makesurethegunbasketisperfectlycleanandapplysomepetro-jelly
orlightgreasetotheinsideofthegunbasketarea.Thishelpsprevent
foamfromcuringtothebasketandgluingthecanontothegun.
4.4. Screw the cartridge onto the gun’s adaptor until it is tight. DO NOT over
tighten as this may cause damage to the threads.
4.5. Pullthetriggertostartthefoamow,thismayberegulatedbythebeadsizeadjusteruntilthedesiredfoambeadisachieved
4.6. Releasethetriggerandtightenthesizeadjustertolocktheneedleintheclosedposition,topreventaccidentaldischargewhen
the gun is not in use.
4.7. Always store the gun with the can attached in the normal use position.
4.8. Replaceemptycartridgesassoonaspossibletoavoidhardeningofthefoaminthegun.
4.9. Tore-use,simplyshakethefoamcanvigorouslyfor30seconds.
4.10 Whenthecartridgeisemptiedunscrewitoutofthefoamgunsocket.Cleanpossibledirtwithcleanserandscrewnewcartridgein.
5. MAINTENANCE
5.1. Ifthegunisnottobereloadeditmustbecleanedassoonaspossibleafterthecartridgehasbeenremovedtoavoidhardeningof
the foam inside the gun.
5.2. Oncethefoamhasbecomehardsolventswillnotnecessarilydissolveallresidues.
5.3. Alwaysensureallfoamisreleasedfromthegunbeforecleaning.
8DO NOT use water to clean the gun.
5.4. Onlycleanthegunwithrecommendedcleaningsolvents,anyothersolventsmaydamagethegun.
5.5. Leavethesolventinthegunfor2minutes.Releasethesolventbypressingthetriggerandrepeatthisprocessuntilthesolvent
FG001Issue110/06/22
Original Language Version
©JackSealeyLimited
Refer to
instructions
g.1
Wear eye
protection
Wear protective
gloves
Wear Face
Mask
(Filtered)
BeadSizeAdjuster