
HEAVY LIFT SUCTION CUP WITH VACUUM
GRIP INDICATOR
MODEL NO: AK98945
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety and local authority regulations are adhered to when using this equipment.
9Familiarise yourself with this product’s application and limitations.
9Maintain the in good condition. DO NOT use if damaged.
9Keep the clean for the best and safest performance.
8DO NOT exceed the rated capacity.
9Suction lifters are hand tools and must not to be used with cranes or other lifting devices.
9Before each use, make sure the suction pad is smooth, clean and undamaged.
9Clean suction pad regularly with non-aggressive cleaners.
9Make sure the surface of the object to be lifted is of non-porous material. In addition, the surface must be clean, dry and free of oils
and grease.
9Use on clean, relatively smooth, non-porous surfaces; Moisture or contaminants can reduce the slip resistance of the cup.
9On rough or porous surfaces, the holding capacity decreases or is non-existent.
8DO NOT use sharp objects to loosen the suction cup from the surface as this will damage the suction pad.
9Only use the suction lifter if you are experienced or under supervision by someone experienced in handling this tool.
9Always test the functioning of the suction cup prior to its use. Examine handle for dents or cracks.
9Examine rubber pad for excessive glaze, cuts or roughness.
9Suction cup should only be used for lifting, carrying and holding objects for a short period of time. However, in the case of long
periodsofattachment,checksuctioncupregularlytoensurermadhesion.Ifgripdoesnotfeelsufcientlyrm,re-applysuctioncup.
9Prior to use, always check the rubber pad for possible loss of suction capacity due to reduced elasticity caused by excessive age,
usage,etc.Arubberpadwhichisdamagedorlackssufcientsuctioncapacitymustbereplaced.Neverusesuctioncupwith
damagedrubberpadorinsufcientsuctioncapacity.
8DO NOT exceed stated lifting capacity of suction cup which is for ‘Float glass’ at room temperatures of 20°C. Cold temperatures,
humidityandpollution,carelesslytreatedordamagedsuctionpads,orusageonmaterialsotherthanatglass(suchasstructured
glass, plastics, stone, metal, etc.) may reduce the holding capacity considerably.
8DO NOT use the cup to support a person.
8DO NOT place the cup face against surfaces which could damage the sealing edges.
9Avoid conditions that could cause the cup to slip or to disengage prematurely, such as: contaminants, cuts or scratches in the cup
face or mounting surface.
8DO NOT allow anything to interfere with free movement of the plunger while the cup is attached.
8DO NOT touch the rubber release tab or the valve release lever while lifting.
8DO NOTuseanysolventsorotherharshchemicalstocleanthecup.Storesuctioncupinaat,relaxedpositionwhennotinuse.
9When not in use, store in a safe, dry, childproof area.
2. INTRODUCTION
Heavy lift capacity. Red line indicator warns of any vacuum loss. Release valve lever for quick removal. Easy attachment on smooth, non-
porousatsurfaces.Completecorrosionresistantnish.Suppliedinstoragecase.
3. SPECIFICATION
Model No:............................................................... AK98945
Cup Diameter:......................................................... Ø206mm
Maximum Lift Capacity:.................................................. 60kg
AK98945 Issue 1 13/08/19
Original Language Version
© Jack Sealey Limited
Refer to
instructions