Sealite AV-OL-75 User manual

Quickstart Guide
AV-OL-75 ICAO LIOL Type A Obstruction Light + Bluetooth
Controller
Avlite is a global manufacturer of Aviation aids to navigation.
We employ leading mechanical, optical, hardware & software engineers to
create innovative products to service the needs of our customers worldwide, and
offer awide range of solar-powered LED lights.
Avlite has been manufacturing lights for over 25 years, and particular care has
been taken to ensure your light gives years of service.
As a commitment to producing the highest quality products for our customers,
Avlite has been independently certified as complying with the requirements of
ISO9001:2008 quality management system.
Test the AV-OL-75
1. The AV-OL-75 is set to a factory default Dusk till Dawn as operating mode.
2. If the AV-OL-75 light is preset to the ON position it is currently in Sleep Mode.
3. To check light is working, cover the light in darkness for at least 30 seconds. The AV-OL-75 will
start flashing.
4. Remove the AV-OL-75 from darkness and wait up to 30 seconds, the AV-OL-75 will stop flashing.
Test the AV-OL-75 via the AvliteProTM App
1. Ensure the light is switched on as per instructions
above.
2. Open the AvlitePro™ App on your device.
3. Connect to a Light, by pressing “Connect via
Bluetooth®”
4. Select
a Light displayed on the “Scan for Lights”
5. Expand the “Light Information” drop down menu then
press Identify, the light to be tested will quickly flash several
times as conrmation.
Sealite United Kingdom Ltd
UK
t: [phone]
Sealite Asia Pte Ltd
Singapore
Sealite USA LLC
USA
t: [phone] t: [phone]
Sealite Pty Ltd
Australia
t: [phone]
We believe technology improves navigation™
[e-mail]
avlite.com
Quickstart!
Switching the AV-OL-75 ON
1. Remove the AV-OL-75 Light, the Switch key (provided) from the
packaging
2. Use the Switch key to remove the AV-OL-75 bung to access the ON/OFF
toggle switch.
3. Use the Switch key to switch ON the AV-OL-75.
4. Place the AV-OL-75 bung back on the base.
Switch Key

Quickstart Guide
AV-OL-75
Sealite Asia Pte Ltd
Singapore
t: [phone]
Sealite USA LLC
USA
t: [phone]
Sealite Pty Ltd
Australia
t: [phone]
We believe technology improves navigation™
[e-mail]
avlite.com
Charging the Battery
New light should be left in the sun for 1-2 days to ensure battery is charged before placing in
service. Please note, light will re-charge even when switch is turned to ‘OFF’ position.
Preferred Installation Location
For best light performance, ensure solar modules are not covered and are in clear view of the
sky with no shadows.
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
AB
ON
OFF Rotary
Switch A
Rotary
Switch B
Intensity Setting
ON / OFF
Switch
User
Replaceable
Battery
Light
Base
Diagram 1.