SECO-LARM Push-to-Exit Bar SD-961A-36 User manual

SD-961A-36
Designedtoallowegressfrominsideanarea
normallylockedbyanelectriclockor
electromagneticlock,and/orto disarm (shunt)
ortriggeranalarmwhenthedoorisopened.
SECO-LARM
®
Push-to-Exit Bar
Features:
Rugged, heavy-duty construction.
Pushing the bar at any point sends a signal to release
the lock and/or sound an alarm.
For 36 inch doors (actual length is 34.5 inches). Can be
cut to size.
Two built-in non-latching (momentary), dual-contact
switches (NO/COM/NC).
-- 5 Amps @ 125VAC.
Attractive brushed-aluminum bar with black
base and trim.
Includes SECO-LARM SD-969-A18 Armored
Door Cord, and mounting hardware for
mounting on wood or metal doors.
SECO-LARM®U.S.A., Inc., 16842Millikan Avenue, Irvine, CA 92606 Tel: [phone](DomesticU.S. & Canada)
Tel: [phone] (California & International) Fax: [phone] Email: [email protected] Website: www.seco-larm.com
SD-961A-36
Circuit Type
Contact Rating
Size
Weight
2 Built-in non-latching (momentary)
N.O. or N.C. Contacts
5 Amps @ 125VAC
For 36” doors. Actual size 34.5”
7 lbs. (3kg)
New!
EasiertoInstall!
Newendcaps come off andgoon in
seconds.
Nowincludes complete mounting
hardwarefor hollowdoors.
PushBar_New2.pmd
TheSECO-LARM policyis oneof continualdevelopment. For that reason,SECO-LARMreserves theright to changeprices andspecifications without notice. SECO-LARMis not responsiblefor misprints.
Copyright © 2005 SECO-LARM U.S.A., Inc.
DIMENSIONS:
23/4”
(70mm)
Total, including end caps:
341/2” (876 mm)
Withoutend caps.
321/4” (819 mm)
213/32” (61mm)
2” (50mm)
219/32”
(66mm)
SPECIFICATIONS: