Secura QST25 User manual

QST 25 INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520 We’re ready to help!
Scan for easy install video
san.us/1140

2
35 lbs.
(15.8 kg)
Wood Stud Install
Concrete Install
Tape
Measure Pencil Level Screw driver
Electric
Drill
Socket
Wrench Wrench Stud Finder Awl Wood Drill Bit
Masonry
Drill Bit Hammer
3/8 in.
(10 mm)
7/16 in.
(12 mm) 1/8 in.
(3 mm)
CAUTION: IMPORTANT SAFETY INSTRUCTIONS —PLEASE READ ENTIRE MANUAL PRIOR TO USE —SAVE THESE INSTRUCTIONS
Before getting started, let’s make sure this mount is perfect for you!
Does your TV
(including accessories)
weigh MORE than
35 lbs. (15.8 kg)?
No?Perfect – you may continue.
Yes?This mount is NOT compatible.
Visit secura-av.com or call 1-800-359-5520
(UK: 0800 056 2853) to find a compatible mount.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-800-359-5520 (UK: 0800 056 2853).
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
Ready to begin?
Solid concrete or
concrete block?
Perfect!
Drywall with
wood studs?
Perfect!
CAUTION:
DO NOT
install into
drywall alone
Unsure?
Call Customer Service:
1-800-359-5520
(UK: 0800 056 2853)
?
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
CAUTION: Avoid potential personal injury or property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
3/8 in.
(10 mm)

3
Dimensions
in.
[mm] TILT

4
M4 x 12mm
M6 x 12mm M6 x 35mm
M4 x 35mm
M6 x 14mm M6
22mm
M4 M6 / M8
M8 x 16mm M8 x 35mm
M8 x 20mm
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
STEP 1 Parts and Hardware
† Nylon locking bracket nuts are
poly-locks and will need to be
forcibly tightened.
* Only needed for TVs with 20.0 x 20.0
cm (7 7/8 x 7 7/8 in.) hole patterns
05 x4
06 x4
07 x4 08 x4
12 x4 13 x4 14 x4
09 x4
10 x4
11 x4
TV Screws
TV Bracket
TV Bracket
Extenders*
Screws*
(TV Bracket Extender)
Nuts*†
(TV Bracket Extender)
03 x4 04 x4
01 x1
02 x2
Washers
Spacers

5
1/4 x 2¾ in.
STEP 2 Parts and Hardware
15 x1
Wall Plate
Lag Bolts
16 x2
17 x2
Fischer UX 10 x 60R
Concrete Anchors
For concrete installations ONLY
CAUTION: Do not use in drywall or wood

6
STEP 1 Attach TV Bracket to TV
1.1 Measure Your TV Hole Pattern
cm
inches
Measure the width and height of your TV hole pattern in cm (see conversion chart below).
Record your measurements:
Width ______cm x Height ______cm
W
H
inch dimensions are approximate
inches cm mm
3 7.5 75
4 10 100
7 ⅞ 20 200

7
1.2 Assemble Your TV Bracket
Determine which TV bracket configuration to use, A or B, based
on your TV hole pattern measurements (W x H) from STEP 1.1.
A20.0
10.0
10.0
7.5
7.5
These smaller hole patterns only use TV bracket 01 .
Do not use the two TV bracket extenders 02 and four screws 03
and four nuts 04 .
7.5 x 7.5
10.0 x 10.0
20.0 X 10.0
Assemble TV bracket extenders 02 onto TV bracket 01 as illustrated.
Secure using four screws 03 and four nuts 04 in the corner holes shown.
NOTE: Nuts 04 are poly-locks and need to be forcibly tightened.
20.0 x 20.0
B
03
20.0
20.0
03
04
02
03
04
01
02
02
01
Dimensions in cm
Dimensions in cm
TV Hole Pattern
Measurement
TV Hole Pattern
Measurement
3/8 in. (10 mm)
wrench
02

8
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M6 or M8) to use.
FLAT BACK ROUND BACK CABLESINSET HOLES
If your TV has a flat back AND you want your TV closer to the
wall, use the shorter TV screws and no spacers 14 .
Spacers 14 and longer TV screws are supplied to accommodate:
●Round/irregular back TVs
●TVs with inset mounting holes
●Extra space needed for cables
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with your screw/
washer/spacer combination
AND TV bracket (STEP 1-5).
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
M6 M8M4
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-800-359-5520.
14

9
1.5 Attach TV Bracket
01
01
Flat Back
Round Back / Extra Space
TV Bracket Configuration B
(from page 7)
Illustrated with spacers
TV Bracket Configuration A
(from page 7)
Illustrated with spacers
02
14
05
09
06
10
07 08
11
12
12
13
13
Position your TV bracket configuration (A or B) over your TV hole pattern - making sure the bracket is centered over the TV hole pattern and level.
Install using the TV screw/washer/spacer configuration you selected for your TV.
CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough
to secure the TV bracket to the TV. DO NOT overtighten the screws.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.

10
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate 15 at your desired height and line up the holes with your stud center line. Mark the hole locations.
3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm). Be sure to drill into the center of the stud.
23
1
STEP 2A Attach Wall Plate Wood Stud Option
CAUTION: Avoid potential personal injury or property damage!
●Drywall covering the wall, must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
●Stud center must be verified
Max. 5/8 in.
(16 mm)
15
1/8 in.
(3 mm)
2¾in. (70 mm)

11
4. Install wall plate 15 using two lag bolts 16 . Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt 16 . DO NOT over-tighten the lag bolts 16 .
NOTE: If needed, you can make small level adjustments to the wall plate 15 by loosening the bottom lag bolt 16 and shifting the wall plate 15
until level. Tighten the bottom lag bolt 16 when adjustments are complete.
Go to STEP 3 on PAGE 14.
15
4
16
16
15

12
15
2
1
1. Position the wall plate 15 on the wall at your desired height. Level the wall plate template and mark the hole locations.
2. Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
3/8 in.
(10 mm)
3 in. (75 mm)
STEP 2B Attach Wall Plate Solid Concrete or Concrete Block Option
CAUTION: Avoid potential personal injury or property damage!
●Mount the wall plate assembly 15 directly onto the concrete surface.
●Minimum solid concrete thickness: 8 in. (203 mm)
●Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)

13
43
15
3. Insert two anchors 17 .
CAUTION: Be sure the anchors are seated flush with the concrete surface.
4. Install wall plate 15 using two lag bolts 16 . Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt 16 . DO NOT over-tighten the lag bolts.
NOTE: If needed, you can make small level adjustments to the wall plate 15 by loosening the bottom lag bolt 16 and shifting the wall plate 15
until level. Tighten the bottom lag bolt 16 when adjustments are complete.
16
16
17

14
2
HEAVY! You may need
assistance with this step.
STEP 3 Hang TV onto Wall Plate
1
IMPORTANT: The locking tab needs
to be in the unlocked position before
attaching the TV to the wall plate 15 .
Hang your TV in either the TILT or LOW PROFILE
positions as shown.
TILT
POSITION
LOW PROFILE
POSITION
15
15
01
01
15

15
3
Remove any cables from the TV.
Move the locking tab into the unlocked position and
lift the TV up and out away from the wall plate 15 .
TV Adjustments
REMOVING THE TV:
CAUTION: Avoid potential personal injuries and property
damage! Once the TV is on the wall plate 15 , move the locking tab
to the locked position to secure the TV onto the wall plate 15 .
15
01
15
01

Milestone AV Technologies and its aliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However,
Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in
connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy,
completeness or suciency of the information contained in this document.
©2016 Milestone AV Technologies. All rights reserved. Secura is a brand of Milestone.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Milestone AV Technologies • 6436 City West Parkway • Eden Prairie, MN 55344 USA 6901-002594 00
Thank you for choosing Secura! Please take a moment to let us know how we did:
Call us: 1-800-359-5520
UK: 0800 056 2853
Email us: [e-mail]