Sega Giant Plants vs Zombies The Last Stand User manual

IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.
OWNER'S MANUALPLANTS V.S. ZOMBIES THE LAST STAND
Sega Amusements Europe Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com
Play It! Amusements, inc.
252 Beinoris Drive, Wood Dale, IL. 60191, USA
USA Sales: +00 (1) 224 265 4287
© SEGA
1st PRINTING

i
BEFORE USING THE PRODUCT,BE SURE TO READ THE FOLLOWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the operation of the
appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used. Be sure to
understand the contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this pictograph will
cause severe injury or death.
Indicates that mishandling the product by disregarding this warning will cause a
potentially hazardous situation which can result in death or serious injury.
Indicates that mishandling the product by disregarding this caution will cause a
slight hazardous situation which can
result in personal injury and/or material damage.
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE." In order to protect the human body and equipment, this display is at-
tached to places where the Owner's Manual, Serviceman Manual and/or Service Manual should be referred
to.
• Perform work in accordance with the instructions herein stated. Instructions for work are explained
by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions
can cause accidents. In the case where only those who have technical expertise should perform the work
to avoid hazardous situation, the instructions herein state that the site maintenance personnel should
perform such work.
• Be sure to turn off the power before working on the machine. To prevent an electric shock, be sure
to turn off the power before carrying out any work that requires direct contact with the interior of the
product. If the work is to be performed in the power-on status, the Instruction Manual herein always states
to that effect.
• Be sure to ground the Earth Terminal. (This is not required in the case where a power cord with earth is
used.)
• This product is equipped with the Earth Terminal.When installing the product, connect the Earth
Terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to an electric shock. After performing repair, etc. for the
• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does
not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth
• Be sure to use fuses which meet the rating. (Only for the machines which use fuses.)

ii
• Specification changes (removal of equipment, conversion and addition) not designated by SEGA are
not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It
is very hazardous to operate the product by removing parts and/or modifying the circuits. Should doors, lids
and protective parts be damaged or lost, refrain from operating the product, and contact where the product was
•
are described. Ensure that the product is compatible with the power supply voltage and frequency requirements
and an electric shock.
•Install and operate the product in places where appropriate lighting is available, allowing warning labels to be
clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous
situations are applied to places where accidents can be caused. Ensure that where the product is operated has
•When handling the monitor, be very careful. (Applies only to products with monitors.) Some of the monitor
parts are subject to high tension voltage. Even after turning off the power, some portions are still subject to
high tension voltage sometimes. Monitor repair and replacement should be performed only by those technical
personnel who have knowledge of electricity and technical expertise.
•Be sure to adjust the monitor properly. (Applies only to products with monitors.) Do not operate the product
cause dizziness or a headache to an operator, a player, or the customers.
•When transporting or reselling this product, be sure to attach this manual to the product.
• In the case where commercially available monitors and printers are used in this product, only the contents
relating to this product are explained herein. Some commercially available equipment has functions and
reactions not stated in this manual. Read this manual together with the instruction manual of such
equipment.
• Descriptions herein contained may be subject to improvement changes without notice.
• The contents described herein are fully prepared with due care. However, should any question arise or errors be
found, please contact SEGA.
INSPECTIONS IMMEDIATELYAFTER TRANSPORTING THE PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting
to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on the power,
check the following points to ensure that the product has been transported in a satisfactory status.
•Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
•Are casters and adjusters damaged?
•Do the power supply voltage and frequency requirements meet with those of the location?
•Are all wiring connectors correctly and securely connected? Unless connected in the correct way, connector
connections can not be made accurately. Do not insert connectors forcibly.
•Do power cables have cuts and dents?
•Are all accessories available?
•

iii
INTRODUCTION
INTRODUCTION
This manual is intended to provide detailed descriptions together with all necessary information covering the general
operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,
"PLANTS VS ZOMBIES."
This manual is intended for the owners, personnel managers in charge of operation of this product.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word “IMPORTANT” and the symbol below.
Indicates important information that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.
Sega Amusements Europe Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com.
Sega Total Solutions
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com/spares
Play it! Amusements
252 Beinoris Drive, Wood Dale, IL. 60191, USA
USA Sales/Service +00(1) 224 265 4287
SPECIFICATIONS
CABINET
Machine Dimensions: (49.352 in.) [Width] x (111.389 in.) [Depth]
Machine Height: (120.282 in.) (Installed)
Machine Weight: 784 lbs (Packaged)
Marquee Wieght 44 lbs.
Seat Weight 42 lbs.
Monitor Cab Weight 353 lbs.
Gun Cab Weight 149 lbs.
Fence Section 55 lbs.
Power, maximum current: 220v ~1.5 AMP

iv
INTRODUCTION
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
only be carried out by professionals with the appropriate specialised knowledge.
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-
vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by
carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable
parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-
nance of amusement equipment. The individual should have either graduated from technical school or hold similar
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
Procedures not described in this manual or marked as ‘to be carried out by site
out by personnel without the necessary skill or technology. Work carried out by

v
INTRODUCTION
Waste of Electrical and Electronic Equipment (WEEE) Statement.
The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based manufac-
turers and importers of Electrical and Electronic Equipment to take back products at the end of their useful life. Sega
WEEE
The symbol shown below will be on all products manufactured from 13thAugust 2005, which indicates this product
must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of their waste
equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical
and electronic equipment.
For more information about where you can send your waste equipment for recycling contact your local authority of-
Waste Electrical and Elec-
tronic Equipment.
Battery Recycling Statement.
The EC Directive on Batteries andAccumulators (2006/66/EC) aims to minimise the impact of batteries on the en-
vironment and encourage the recovery of the materials they contain. To achieve increased collection and recycling
of waste batteries, the Directive places ‘producer responsibility’obligations on manufacturers and importers of
portable, industrial and automotive batteries.
they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used
batteries by arranging to return them to a designated collection point for the correct recycling.
For more information about where you can send your waste batteries for recycling contact your local authority of-
REGISTERED IN ENGLAND REGISTERED NO. 1711515
REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREYKT9 2NY

vi

vii
TABLE OF CONTENTS
INTRODUCTION i-vii
1HANDLING PRECAUTIONS 1-4
2 PRECAUTIONS REGARDING INSTALLATION 5-7
3 PRECAUTIONS REGARDING OPERATION 8-11
4PARTS DESCRIPTION 12-14
12
13
4-1 FIXATION TO SITE
4-2 POWER SUPPLY 15-19
20-35
20
21
28
5GAME DISCRIPTION
32
33
36-42
37
6TEST MODE
39
6-1 TEST MODE
42
6-2 SYSTEM INFORMATION
43-44
6-3 BOOKKEEPING
43
6-4 SETTING THE CLOCK
44
6-5 GAME SETTINGS
45-48
45
48
7-1 CONTROLLER UNIT
49-50
7-2 ADJUSTING VOLUME POT
51-54
7-3 GREASING
52
55-56
7CONTROLLER UNIT
8LCD/PLASMA DISPLAY
57-64
65-66
8-1 SAFETY HANDLING MONITOR
8-2 CLEANING SCREEN
9-3 CLEANING THE COIN SELECTOR
9-3 FAULT FINDING
9COIN HANDLING
11-1 GAMEBOARD LOCATION AND REMOVAL
10 PERIODIC INSPECTION
11 GAME BOARD
12 ART RELATED PARTS
13 PART DESCRIPTION
14 WIRING DIAGRAMS

1

2
HANDLING PRECAUTIONS
1
1HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that
the player can enjoy the game safely.
Noncompliance with the following points or inappropriate handling running counter to the cautionary matters herein
stated can cause personal injury or damage to the machine.
Before performing work, be sure to turn the power off. Performing the work
without turning the power off can cause an electric shock or short circuit.
In cases where work should be performed in the status of power on, this
manual always states to that effect.
To avoid an electric shock or short circuit, do not plug in or unplug quickly.
To avoid an electric shock, do not plug in or unplug with a wet hand.
etc.) If exposed, the power cords and earth wires are susceptible to
damage. Damaged cords and wires can cause an electric shock or short
circuit.
To avoid causing a fire or an electric shock, do not put things on or
damage the power cords.
When or after installing the product, do not unnecessarily pull the power
In case the power cord is damaged, ask for a replacement through where
Be sure to perform grounding appropriately. Inappropriate grounding can
cause an electric shock.
Be sure that connections such as IC BD are made properly. Insufficient
insertion can cause an electric shock.
not designated by SEGA are not permitted.
Failure to observe this may cause a fire or an electric shock. Non-
conditions of the players or the onlookers, or result in injury during play.
SEGA shall not be held responsible for damage, compensation for damage
Do not perform any work or change parts not listed in this manual. Doing
so may lead to an accident.
If you need to perform any work not listed in this manual, request work
for details.
Be sure to perform periodic maintenance inspections herein stated.

3
HANDLING PRECAUTIONS
1
For the IC board circuit inspections, only the use of a logic tester is
recommended. Using a Multi Tester or General Purpose Tester may result in
damage to IC Circuits.
Static electricity from your body may damage some electronics devices
on the IC board. Before handling the IC board, touch a grounded metallic
surface so that the static electricity can be discharged.
This video gaming cabinet utilises a motorised steering feedback system.
Do not attempt to service this part or any other part in close proximity to the
steering mechanism whilst power is applied.
Some parts are not designed and manufactured specifically for this game
such general-purpose parts. If this is the case, SEGA cannot repair or replace
a failed game machine whether or not a warranty period has expired.
CONCERNING THE STICKER DISPLAY
-
cations. It also has a Sticker describing where to contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker.
The Serial Number indicates the product register. Identical machines could have different parts depending on the
manual. In order to ensure you order the correct parts, mention the Serial No. when contacting the applicable places.
CONCERNING WARNING DISPLAYS
This SEGAproduct has warning displays on stickers, labels and/or printed instructions adhered/attached to or in-
corporated in the places where a potentially hazardous situation could arise. The warning displays are intended for
accident prevention for customers and for avoiding hazardous situations relating to maintenance and servicing work.
Some portions of the cabinet contain high voltage and may cause accidents if touched. When performing mainte-
nance, be very careful of the warning displays. It is especially important that any complex repair and replacement
work not mentioned herein should be performed by those technical personnel who have knowledge of electricity and
technical expertise.
In order to prevent accidents, caution any customer ignoring the warnings to cease and desist immediately.

4
HANDLING PRECAUTIONS
1
440-DS0010UK
Fuse Warning
Fuse Ratings and Caution Ratings/Serial
P.A.T. Label
Shock Hazard Warning
Tip Over
Hazard Hi-Voltage
440-DS0010UK
Hi-Voltage
If you or your child have experienced a convulsive attack, loss of
consciousness, etc. due to light stimulus or TV games, or fear that you
might experience such symptoms, be very careful of using this
machine.
If you feel sick while playing the game, immediately discontinue use
and take a rest.
440-CS0036UK
Caution - Epilepsy
CAUTION
TIPOVER
HAZARD
CAUTION
TIPOVER
HAZARD

5
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
2 PRECAUTIONS REGARDING INSTALLATION
This product is an indoor game machine. Do not install it outside. Even indoors,
avoid installing in places mentioned below so as not to cause a fire, electric
shock, injury and/or malfunction.
Places subject to rain or water leakage, or places subject to high humidity in the
proximity of an indoor swimming pool and/or shower, etc.
Places subject to direct sunlight, or places subject to high temperatures in the
proximity of heating units, etc.
Places filled with inflammable gas or vicinity of highly inflammable/volatile
chemicals or hazardous matter.
Dusty places.
Sloped surfaces.
Places subject to any type of violent impact.
Areas where the temperature exceeds the applicable temperature (ambient
temperature) range of 5 to 30 degrees centigrade.
LIMITATIONS OF USAGE
Be sure to check the Electrical Specifications. Ensure that this product
is compatible with the location's power supply, voltage, and frequency
requirements. A plate describing Electrical Specifications is attached to the
electric shock.
This product requires a breaker and earth mechanism as part of the location
Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area). Non-
Be sure to use an independent power supply equipped with an earth leakage
breaker. Using a power supply without an earth leakage breaker can cause an
Putting many loads on one electrical outlet can cause generation of heat and a
When using an extension cord, ensure that the cord is rated at 15 A or higher (AC
100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a cord rated
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
Securing a safe area for operation as described in this manual will ensure
safe operation for players and observers.
SEGA shall not be held responsiblefor damage or compensationfor damage
to a third party, resulting from the failure to observe this instruction.
For the operation of this machine, please secure a minimum area of 3.03m (D)
and 1.45m (W) (119.264 x 57.227 inches)
enter or exit the game safely.
OPERATION AREA (SINGLE CABINET)
1.45 m
3.03 m
.2 m

6
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
Securing a safe area for operation as described in this manual will ensure
safe operation for players and observers.
SEGA shall not be held responsiblefor damage or compensationfor damage
to a third party, resulting from the failure to observe this instruction.
For the operation of this machine, please secure a minimum area of 3.03m (D)
and 1.45m (W) (119.264 x 57.227 inches)
enter or exit the game safely.
OPERATION AREA (SINGLE CABINET)
1.45 m
3.03 m
.2 m

7
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
To install this product, the entrance must be at least 125.354 cm in width and
305.52 cm in height (49.352 x 120.282 inches).
Do not attempt to push/pull the machines while holding onto the Controller
or Assy Billboard. This may result in part damage and or personal injury.
49.352 in
111.389 in
120.282 in

8
PRECAUTIONS REGARDING PRODUCT OPERATION
3
In order to avoid accidents, check the following before starting the operation:
• To ensure maximum safety for the players and the customers, ensure that
where the product is operated has lighting to allow any warnings to
be read Operation under lighting can cause bodily contact with
each other, hitting accident, and/or trouble between customers.
• Be sureto perform appropriate adjustment of the display (LCD, Plasma, CRT
or Projector). For operation of this machine, do not leave monitor's
or deviation as is. Failure to observe this can have a bad upon the
players' or the customers' physical conditions.
• It is suggested to ensure a space allowing the players who feel sick while
playing the game to take a rest.
• Check if all of the adjusters are in contact with the surface. If they are not,
the Cabinet can move and cause an accident.
• Do not put any heavy item on this product. Items, if placed on this product
may fall and cause injury to the player / observer.
• Do not climb on the product. Climbing on the product can cause falling
down accidents. To check the top portion of the product, use a step ladder.
3 PRECAUTIONS REGARDING OPERATION
To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.
Each leg adjuster MUST be lowered so that
the casters are raised approximately 5mm off

9
PRECAUTIONS REGARDING PRODUCT OPERATION
3
• Toavoid electric shock, ensure that all covers and panels are undamaged
dna Do not operate with covers removed.
• Toavoid electric shock, short circuit and/or parts damage, do not put the
gniwollof items on or in the periphery of the product.
• Flower vases, cups, water tanks, cosmetics, and receptacles/
slessev/sreniatnoc containing chemicals and water.
• To avoid injury, be sure to provide space by considering the
potentially crowded situation at the installation location. installation
space can cause making bodily contact with each other, hitting accidents,
and/or trouble between customers.
• Everyday when cleaning the Controller, inspect the controller and make sure
that there are no cracks in the surface, and that the fastening screws are not
loose. If the game is played with cracks or loose screws, it can cause injuries
to the player.

10
PRECAUTIONS REGARDING PRODUCT OPERATION
3
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors
and players.
• For safety reasons, do not allow any of the following people to play the game.
• Those who have high blood pressure or a heart problem.
• Those who have experienced muscle convulsion or loss of consciousness
nehw playing video games, etc.
• Those who have neck or spinal cord problems.
• Those who are intoxicated or under the of drugs.
• Pregnant women.
• Those who are not in good health.
• Those who do not follow the attendant’s instructions.
• Those who cannot grasp the Control Unit securely because of immobility in
hands or arms.
• Persons who disregard the product's warning displays.
sihT • product is intended for a single player only. Having two or more
snosrep simultaneously playing this product can result to injury to the player
dna possible damage to the product.
• Even players who have never been adversely affected by light stimulus might
ecneirepxe dizziness or headache depending on their physical condition
nehw playing the game.
llamS • children are especially likely to experience these symptoms.
noituaC guardians of small children to keep watch on their children during
.yalp
• Instruct those who feel sick during play to have a medical examination.
• To avoid injury from falls and electric shocks due to spilled drinks, instruct the
reyalp not to place heavy items or drinks on the product.
• To avoid electric shocks and short circuits, do not allow customers to put
sdnah and or extraneous matter in the openings of the product or small
sgninepo in or around the doors.
• To avoid falls and resulting injury, immediately stop the customer from leaning
tsniaga or climbing on the product, etc.
• To avoid electric shock and short circuit, do not allow customers to unplug the
rewop plug without a reason.
tcurtsnI • the guardians of small children to keep an eye on their children.
nerdlihC • cannot sense danger. Allowing small children to get near
a player who is playing the game could result in the children being bumped,
kcurts or knocked down.
DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)

11
PRECAUTIONS REGARDING PRODUCT OPERATION
3
• Toavoid electric shock, ensure that all covers and panels are undamaged
dna Do not operate with covers removed.
• Toavoid electric shock, short circuit and/or parts damage, do not put the
gniwollof items on or in the periphery of the product.
• Flower vases, cups, water tanks, cosmetics, and receptacles/
slessev/sreniatnoc containing chemicals and water.
• To avoid injury, be sure to provide space by considering the
potentially crowded situation at the installation location. installation
space can cause making bodily contact with each other, hitting accidents,
and/or trouble between customers.
• Everyday when cleaning the Controller, inspect the controller and make sure
that there are no cracks in the surface, and that the fastening screws are not
loose. If the game is played with cracks or loose screws, it can cause injuries
to the player.