Sega Racing Classic User manual

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the
operation of the product. After carefully reading and sufciently understanding the warning displays
and cautions, handle the product appropriately. Be sure to keep this manual close to the product or
in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.
Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this pictograph will
cause severe injury or death.
Indicates that mishandling the product by disregarding this warning will cause
a potentially hazardous situation which can result in death or serious injury.
Indicates that mishandling the product by disregarding this caution will cause
a slight hazardous situation which can result in personal injury and/or material
damage.
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE." In order to protect the human body and equipment,
this display is attached to places where the instruction manual should be referred to.
Indicates a "protective earth terminal." Before operating the equipment, be sure to connect
it to the ground.
(The step may be omitted for products in which a power cable with earth is used.)
• Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention.
Failing to perform work as per the instructions can cause accidents. In the case where only
those who have technical expertise should perform the work to avoid hazardous situation, the
instructions herein state that the site maintenance personnel should perform such work.
• Be sure to turn off the power before working on the machine.
To prevent an electric shock, be sure to turn off the power and unplug the power cable before
carrying out any work that requires direct contact with the interior of the product. If the work is
to be performed in the power-on status, the instruction manual herein always states to that effect.
• Be sure to ground the earth terminal.
(This is not required in the case where a power cable with earth is used.)
This product is equipped with the earth terminal. When installing the product, connect the earth
terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the
product is grounded appropriately, the user can be subject to an electric shock. After performing
repair, etc. for the control equipment, ensure that the earth wire is rmly connected to the control
equipment.
• Ensure that the power supply used is equipped with an earth leakage breaker.
Using a power supply which is not equipped with the earth leakage breaker can cause a re when
earth leakage occurs.
• Besuretousefuseswhichmeetthespeciedrating.
(Only for the machines which use fuses.)
Using fuses exceeding the specied rating can cause a re and an electric shock.

• Specicationchanges(removalofequipment,conversionandaddition)not
designated by SEGA are not allowed.
The parts of the product include warning labels for safety, covers for personal protection, etc. It
is very hazardous to operate the product by removing parts and/or modifying the circuits. Should
doors, lids and protective parts be damaged or lost, refrain from operating the product, and
contact where the product was purchased from or the ofce herein stated.
SEGA shall not be held responsible for any accidents, compensation for damage to a third party,
resulting from the specications not designated by SEGA.
• Ensure that the product meets the requirements of appropriate electrical
specications.
Before installing the product, check for electrical specications. SEGA products have a
nameplate on which electrical specications are described. Ensure that the product is compatible
with the power supply voltage and frequency requirements of the location. Using any electrical
specications different from the designated specications can cause a re and an electric shock.
• Installandoperatetheproductinplaceswhereappropriatelightingisavailable,
allowing warning labels to be clearly read.
To ensure safety for the customers, labels and printed instructions describing potentially
hazardous situations are applied to places where accidents can be caused. Ensure that where the
product is operated has sufcient lighting allowing the warnings to be read. If any label is peeled
off, apply it again immediately. Please place an order with where the product was purchased from
or the ofce herein stated.
• Whenhandlingthemonitor,beverycareful.
(Applies only to products with monitors.)
Some of the monitor parts are subject to high tension voltage. Even after turning off the power,
some portions are still subject to high tension voltage sometimes. Monitor repair and replacement
should be performed only by those technical personnel who have knowledge of electricity and
technical expertise.
•Be sure to adjust the monitor properly.
(Applies only to products with monitors.)
Do not operate the product leaving on-screen ickering or blurring as it is. Using the product
with the monitor not properly adjusted may cause dizziness or a headache to an operator, a
player, or the customers.
•When transporting or reselling this product, be sure to attach this manual to the
product.
* In the case where commercially available monitors and printers are used in this product, only the
contents relating to this product are explained herein. Some commercially available equipment
has functions and reactions not stated in this manual. Read this manual together with the specic
instruction manual of such equipment.
* Descriptions herein contained may be subject to improvement changes without notice.
* The contents described herein are fully prepared with due care. However, should any question
arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately
after transporting to the location. Nevertheless, an irregular situation may occur during
transportation. Before turning on the power, check the following points to ensure that the product
has been transported in a satisfactory status.
Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are casters and adjusters damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct way,
connector connections can not be made accurately. Do not insert connectors forcibly.
Do power cables have cuts and dents?
Are all accessories available?
Can all doors and lids be opened with the accessory keys? Can doors and lids be rmly closed?

i
TABLE OF CONTENTS
E2-1002 420-7253-01
TABLE OF CONTENTS
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
TABLE OF CONTENTS i
INTRODUCTION iv
Denition of 'Site Maintenance Personnel or
Other Qualied Individuals'...................................................................v
1HANDLING PRECAUTIONS 1
2
PRECAUTIONS REGARDING INSTALLATION LOCATION 4
2-1 LIMITATIONS OF USAGE ...................................................... 5
2-2 OPERATION AREA ................................................................ 6
3 PRECAUTIONS REGARDING PRODUCT OPERATION 7
3-1 BEFORE OPERATION ........................................................... 7
3-2
DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) ... 9
4 PART DESCRIPTIONS 11
5 ACCESSORIES 12
6 ASSEMBLY AND INSTALLATION 15
6-1 ATTACHING THE BILLBOARD ............................................ 17
6-2 SECURING IN PLACE.......................................................... 18
6-3 CONNECTING THE POWER CABLE AND EARTH............. 20
6-4 ASSEMBLING CHECK ......................................................... 22
7 PRECAUTIONS WHEN MOVING THE MACHINE 24
8 PLAYING THE GAME 26
8-1 GAME OUTLINE ................................................................... 26
8-2 GAME SCREENS ................................................................. 27
8-3 GAME RULES....................................................................... 27
8-4 HOW TO PLAY ..................................................................... 28
8-5 HINTS FOR PLAYING THE GAME ...................................... 30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

ii TABLE OF CONTENTS
9 EXPLANATION OF TEST AND DATA DISPLAY 31
9-1 SWITCH UNIT....................................................................... 32
9-2 SYSTEM TEST MODE ......................................................... 33
9-3 GAME TEST MODE.............................................................. 34
9-3-1 GAME TEST MODE.............................................. 34
9-3-2 BOOKKEEPING .................................................... 36
9-3-3 INPUT TEST.......................................................... 38
9-3-4 OUTPUT TEST...................................................... 39
9-3-5 DRIVE BD TEST ................................................... 40
9-3-6 GAME ASSIGNMENTS......................................... 42
9-3-7 GAME SYSTEM INFORMATION.......................... 44
9-3-8 BACKUP DATA CLEAR ........................................ 45
10 LCD MONITOR 46
10-1 CLEANING THE LCD MONITOR SCREEN ......................... 46
10-2 ADJUSTING THE LCD MONITOR ....................................... 47
11 CONTROL PANEL (STEERING WHEEL MECHANISM) 53
11-1 VOLUME ADJUSTMENT...................................................... 54
11-2 VOLUME REPLACEMENT ................................................... 55
11-3 GREASING ........................................................................... 56
12 SHIFT LEVER 57
12-1 CHECKING THE MICROSWITCHES ................................... 57
12-2 REPLACING MICROSWITCHES ......................................... 58
13 ACCELERATOR & BRAKE 60
13-1 VOLUME ADJUSTMENT AND REPLACEMENT ................. 61
13-2 GREASING ........................................................................... 63
14 COIN SELECTOR 64
14-1 COIN INSERTION TEST ...................................................... 64
14-2 CLEANING THE COIN SELECTOR ..................................... 65
14-3 HANDLING THE COIN JAM ................................................. 66
15 RINGWIDE (GAME BOARD) 67
15-1 CLEANING THE GAME BOARD AND SURROUNDING PARTS ... 69
15-2 REMOVING THE GAME BOARD ......................................... 70
15-3 COMPOSITION OF RINGWIDE ........................................... 71
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

iii
TABLE OF CONTENTS
16 FLUORESCENT LIGHT/OTHER LAMPS REPLACEMENT 72
16-1 BILLBOARD FLUORESCENT LIGHT................................... 73
16-2
START BUTTON LAMP, VIEW CHANGE BUTTON LAMP .... 74
17 PERIODIC INSPECTION 76
18 TROUBLESHOOTING 79
18-1 PROBLEMS OTHER THAN ERROR MESSAGES............... 79
18-2 ERROR MESSAGES ............................................................ 82
18-3 SOFTWARE INSTALLATION ............................................... 83
19 NETWORK PLAY 88
19-1 INSTALLATION PRECAUTIONS.......................................... 88
19-2 HOW TO CONNECT 2 CABINETS....................................... 90
19-3 HOW TO CONNECT 3 OR 4 CABINETS ............................. 93
19-4 NETWORK PLAY PRECAUTIONS....................................... 97
20 DESIGN-RELATED PARTS 98
21 PARTS LIST 99
22 WIRE COLOR CODE TABLE 152
23 WIRING DIAGRAM 153
SEGA AMUSEMENTS OFFICES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

iv INTRODUCTION
INTRODUCTION
This manual is intended to provide detailed descriptions together with all the necessary information covering the
general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,
“SEGA RACING CLASSIC.”
This manual is intended for the owners, personnel and managers in charge of operation of the product.
Operate the product after carefully reading and sufciently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the product, making sure to unplug the electrical cord from the
outlet, and contact the ofce listed in this manual or the point-of-purchase for this product.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word “IMPORTANT” and the symbol below.
Indicates important information that, if ignored, may result in the mishandling of
the product and cause faulty operation or damage to the product.
SPECIFICATIONS
Installation space 1,010 mm (39.8 in) [Width] x 1,510 mm (59.4 in) – 1,620 mm (63.8 in) [Depth]
Height 2,100 mm (82.7 in)
Weight 250 kg (551.2 lb)
Power, maximum current 570 W, 5.3 A (AC 120 V, 60 Hz Area)
600 W, 2.9 A (AC 220 V, 50 Hz Area)
610 W, 2.9 A (AC 220 V, 60 Hz Area)
620 W, 2.9 A (AC 230 V, 50 Hz Area)
600 W, 2.7 A (AC 240 V, 50 Hz Area)
Power, current 560 W, 5.6 A, (Max.) (AC 110 V, 60 Hz; Taiwan)
240 W, 2.3 A, (Min.) (AC 110 V, 60 Hz; Taiwan)
NOTE: The contents herein described are subject to change without notice.

v
INTRODUCTION
Denitionof'SiteMaintenancePersonnelorOtherQualiedIndividuals'
Proceduresnotdescribedinthismanualormarkedas'tobecarriedoutbysite
maintenancepersonnelorotherqualiedprofessionals'shouldnotbecarried
out by personnel without the necessary skill or technology. Work carried out by
unqualiedpersonsmaycauseseriousaccidents,includingelectrocution.
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions that potentially dangerous procedures should only
be carried out by professionals with the appropriate specialized knowledge.
The site maintenance personnel or other qualied professionals' mentioned in this manual are dened as follows:
Site maintenance personnel:
Persons with experience in maintaining amusement equipment, vending machines, etc., working under the
supervision of the owner/operator of this product to maintain machines within amusement facilities or similar
premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of
units/expendable parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, involved in design, production, testing or maintenance
of amusement equipment. Should have graduated from technical school or hold similar qualications in electrician/
electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

1
HANDLING PRECAUTIONS
1 HANDLING PRECAUTIONS
● Beforeperformingwork,besuretoturnthepoweroff.Performingthework
without turning the power off can cause an electric shock or short circuit. In the
case work should be performed in the status of power on, this manual always
states to that effect.
● Toavoidanelectricshockorshortcircuit,donotpluginorunplugquickly.
● Toavoidanelectricshock,donotpluginorunplugwithawethand.
● Donotexposepowercablesorearth(ground)wiresonthesurface,(oor,
passage,etc.).Ifexposed,thepowercablesandearth(ground)wiresare
susceptible to damage. Damaged cables and wires can cause an electric shock
or short circuit.
● Toavoidcausingareoranelectricshock,donotputthingsonordamagethe
power cables.
● Whenorafterinstallingtheproduct,donotunnecessarilypullthepowercable.
Ifdamaged,thepowercablecancauseareoranelectricshock.
● Incasethepowercableisdamaged,askforareplacementthroughwherethe
productwaspurchasedfromortheofcelistedinthismanual.Usingthecable
asisdamagedcancausere,anelectricshockorleakage.
● Besuretoperformgroundingappropriately.Inappropriategroundingcancause
an electric shock.
●BesurethatconnectionssuchasICboardaremadeproperly.Insufcient
insertion can cause an electric shock.
● Specicationchanges,removalofequipment,conversionand/oraddition,not
designated by SEGA are not permitted.
- Failuretoobservethismaycauseareoranelectricshock.Non-compliance
withthisinstructioncanhaveabadinuenceuponphysicalconditionsofthe
players or the onlookers, or result in injury during play.
- SEGA shall not be held responsible for damage, compensation for damage to
athirdparty,causedbyspecicationchangesnotdesignatedbySEGA.
● Besuretoperformperiodicmaintenanceinspectionshereinstated.
When installing or inspecting the product, be very careful of the following points and pay attention to ensure that the
player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters
herein stated can cause personal injury or damage to the product.
1