Sega Snakes & Ladders User manual

IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.
Sega Amusements Europe Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com
Play It! Amusements, inc.
252 Beinoris Drive, Wood Dale, IL. 60191, USA
USA Sales: +00 (1) 224 265 4287
© SEGA
1st PRINTING
OWNER'S MANUAL 420-0020UK
SEGA SNAKES & LADDERS

BEFORE USING THE PRODUCT,BE SURE TO READ THE FOLLOWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the operation of the
product. After carefully reading and sufciently understanding the warning displays and cautions, handle the product
appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used. Be sure to
understand the contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this pictograph will
cause severe injury or death.
Indicates that mishandling the product by disregarding this warning will cause a
potentially hazardous situation which can result in death or serious injury.
Indicates that mishandling the product by disregarding this caution will cause a
slight hazardous situation which can
result in personal injury and/or material damage.
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE." In order to protect the human body and equipment, this display is at-
tached to places where the Owner's Manual, Serviceman Manual and/or Service Manual should be referred
to.
• Perform work in accordance with the instructions herein stated. Instructions for work are explained
by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions
can cause accidents. In the case where only those who have technical expertise should perform the work
to avoid hazardous situation, the instructions herein state that the site maintenance personnel should
perform such work.
• Be sure to turn off the power before working on the machine. To prevent an electric shock, be sure
to turn off the power before carrying out any work that requires direct contact with the interior of the
product. If the work is to be performed in the power-on status, the Instruction Manual herein always states
to that effect.
• Be sure to ground the Earth Terminal. (This is not required in the case where a power cord with earth is
used.)
• This product is equipped with the Earth Terminal. When installing the product, connect the Earth
Terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to an electric shock. After performing repair, etc. for the
control equipment, ensure that the Earth Wire is rmly connected to the control equipment.
• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does
not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth
Leakage Breaker can cause a re when earth leakage occurs.
• Besuretousefuseswhichmeetthespeciedrating. (Only for the machines which use fuses.)
Using fuses exceeding the specied rating can cause a re and an electric shock. (Only for the machines
which use fuses.)Using fuses exceeding the specied rating can cause a re and an electric shock.

• Specification changes (removal of equipment, conversion and addition) not designated by SEGA are
not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It
is very hazardous to operate the product by removing parts and/or modifying the circuits. Should doors, lids
and protective parts be damaged or lost, refrain from operating the product, and contact where the product was
purchased from or the ofce herein stated. SEGA shall not be held responsible for any accidents, compensation
for damage to a third party, resulting from the specications not designated by SEGA.
• Ensure that the product meets the requirements of appropriate electrical specications. Before installing the
product, check for electrical specications. SEGA products have a nameplate on which electrical specications
are described. Ensure that the product is compatible with the power supply voltage and frequency requirements
of the location. Using any electrical specications different from the designated specications can cause a re
and an electric shock.
• Install and operate the product in places where appropriate lighting is available, allowing warning labels to be
clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous
situations are applied to places where accidents can be caused. Ensure that where the product is operated has
sufcient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please
place an order with where the product was purchased from or the ofce herein stated.
• When handling the monitor, be very careful. (Applies only to products with monitors.) Some of the monitor
parts are subject to high tension voltage. Even after turning off the power, some portions are still subject to
high tension voltage sometimes. Monitor repair and replacement should be performed only by those technical
personnel who have knowledge of electricity and technical expertise.
• Be sure to adjust the monitor properly. (Applies only to products with monitors.) Do not operate the product
leaving on-screen ickering or blurring as it is. Using the product with the monitor not properly adjusted may
cause dizziness or a headache to an operator, a player, or the customers.
• When transporting or reselling this product, be sure to attach this manual to the product.
• In the case where commercially available monitors and printers are used in this product, only the contents
relatingtothisproductareexplainedherein.Somecommerciallyavailableequipmenthas functionsand
reactions not stated in this manual. Read this manual together with the specic instruction manual of such
equipment.
• Descriptionshereincontainedmaybesubjecttoimprovementchangeswithoutnotice.
• Thecontentsdescribedhereinarefullypreparedwithduecare.However,shouldanyquestionariseorerrorsbe
found,pleasecontactSEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting
to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on the power,
check the following points to ensure that the product has been transported in a satisfactory status.
• Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
• Are casters and adjusters damaged?
• Do the power supply voltage and frequency requirements meet with those of the location?
• Are all wiring connectors correctly and securely connected? Unless connected in the correct way, connector
connections can not be made accurately. Do not insert connectors forcibly.
• Do power cables have cuts and dents?
• Are all accessories available?
• Can all doors and lids be opened with the accessory keys? Can doors and lids be rmly closed?

INTRODUCTION
iii
INTRODUCTION
This manual is intended to provide detailed descriptions together with all necessary information covering the general
operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,
"SEGA’S SNAKES AND LADDERS"
This manual is intended for the owners, personnel managers in charge of operation of this product.
Operate the product after carefully reading and sufciently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the
outlet, and contact the ofce listed below or the point-of-purchase for this product.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word “IMPORTANT” and the symbol below.
Indicates important information that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.
Sega Amusements Europe Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com.
Sega Total Solutions
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [email protected] Web: http://www.segaarcade.com/spares
Play it! Amusements
252 Beinoris Drive, Wood Dale, IL. 60191, USA
USA Sales/Service +00(1) 224 265 4287
SPECIFICATIONS
Machine Dimensions:
Cabinet w/o Billboard & Body (3) 0,99m (39in.) [Width] x 0.85m (33.5in.) [Depth]
2.24m (88.2in.) [Height]
Cabinet with Billboard 1.38m (54.3in.) [Width] x 0.85m (33.5in.) [Depth]
2.73m (107.4in.) [Height]
Weight: 120Kg
Electrical Consumption
Operating Voltage AC240V (switchable to AC120V via PSU)
Current 0.4A @ AC240V
0.4A @ AC220V
0.6A @ AC120V

INTRODUCTION
iv v
INTRODUCTION
Waste of Electrical and Electronic Equipment (WEEE) Statement.
The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based manufac-
turers and importers of Electrical and Electronic Equipment to take back products at the end of their useful life. Sega
Amusements Europe Ltd accepts its responsibility to nance the cost of treatment and recovery of redundant WEEE
in the United Kingdom in accordance with the specied WEEE recycling requirements.
The symbol shown below will be on all products manufactured from 13th August 2005, which indicates this product
must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of their waste
equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical
and electronic equipment.
For more information about where you can send your waste equipment for recycling contact your local authority of-
ce.
For non-UK users contact your local authority ofce for information on the recycling of Waste Electrical and Elec-
tronic Equipment.
Battery Recycling Statement.
The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on the
environment and encourage the recovery of the materials they contain. To achieve increased collection and recycling
of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and importers of port-
able, industrial and automotive batteries.
The symbol shown below will be on all equipment tted with batteries from 26th September 2008 and indicates they
must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used batteries
by arranging to return them to a designated collection point for the correct recycling.
For more information about where you can send your waste batteries for recycling contact your local authority of-
ce.
REGISTERED IN ENGLAND REGISTERED NO. 1711515
REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions for potentially dangerous procedures which should
only be carried out by professionals with the appropriate specialised knowledge.
The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-
vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by
carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable
parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-
nance of amusement equipment. The individual should have either graduated from technical school or hold similar
qualications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
Denition of 'Site Maintenence Personnel or Other Qualied Individuals
Procedures not described in this manual or marked as ‘to be carried out by site
maintenance personnel or other qualied professionals’ should not be carried
out by personnel without the necessary skill or technology. Work carried out by
unqualied persons may cause serious accidents, including electrocution.

vi
INTRODUCTION
RoHS Statement.
Sega amusements europe are to the best of our knowledge acting in accordance with the European Union RoHS2
Directive 2011/65/EU and hearby declare that RoHS2 restricted substances are not intentionally added to this
product over the permitted limits.
These limits are:
Lead (0.1%)
Mercury (0.1%)
Cadmium (0.1%)
Hexavalent chromium (0.1%)
Polybrominated biphenyls (0.1%)
Polybrominated diphenyl ethers (PBDE) (0.1%)
Products containing the substances listed above are in concentration levels of that below the maximum limits and are
understood to be in compliance with Directive 2011/65/EU of the European Parliment.

vii
TABLE OF CONTENTS
INTRODUCTION iii
1HANDLING PRECAUTIONS 1
2 PRECAUTIONS REGARDING INSTALLATION 4
3 PRECAUTIONS REGARDING OPERATION 7
4PART DESCRIPTIONS 10
5ACCESSORIES 11
6 ASSEMBLY AND INSTALLATION 13
6-1 INSTALLING THE CABINET 14
6-2 FIXATION TO SITE 22
6-3 POWER SUPPLY AND OTHER CONNECTIONS 24
6-4 TURNING ON THE POWER 25
7PRECAUTIONS WHEN MOVING THE MACHINE 27
7-1 PRECAUTIONS WHEN MOVING FROM SITE 28
9EXPLANATION OF TEST AND DATA DISPLAY 31
9-1 SWITCH UNIT AND COIN METER. 32
9-2 TEST MENU 32
10 CONTROLLER UNIT(S) 44
10-1 AJUSTING/CHANGING THE POT 45
10-2 GREASING 49
11 FEATURE REEL / TRACKER 50
12 COIN HANDLING 54
12-1 CLEANING THE COIN SELECTOR 54
12-2 FAULT FINDING 57
12-3 ADJUSTING THE PRICE OF PLAY (EXCEL) 58
13 LAMPS AND LIGHTING 62
13-1 REPLACING THE COIN DOOR LAMP 62
13-2 REPLACING THE LADDER / WINLINE LED’s 63
13-3 REPLACING THE 5 DIGIT NUMERIC DISPLAY 65
13-4 REPLACING THE LED (WHT) SNAKE BODY 67
13-5 REPLACING THE LED (WHT) FEATURE REEL / TRACKER 69
13-6 REPLACING THE LED (RGB) PULL 71
14 PERIODIC INSPECTION 72
15 TROUBLESHOOTING 74
11-1 TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN) 74

viii
16 GAME BOARD 77
17 DESIGN-RELATED PARTS 96
18 PARTS LIST 97
19 WIRE COLOUR CODE TABLE 117
20 WIRING DIAGRAMS 118

HANDLING PRECAUTIONS
1
1
1HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that
the player can enjoy the game safely.
Noncompliance with the following points or inappropriate handling running counter to the cautionary matters herein
stated can cause personal injury or damage to the machine.
Before performing work, be sure to turn the power off. Performing the work
without turning the power off can cause an electric shock or short circuit.
In cases where work should be performed in the status of power on, this
manual always states to that effect.
To avoid an electric shock or short circuit, do not plug in or unplug quickly.
To avoid an electric shock, do not plug in or unplug with a wet hand.
Do not expose power cords or earth wires on the surface, (oor, passage,
etc.) If exposed, the power cords and earth wires are susceptible to
damage. Damaged cords and wires can cause an electric shock or short
circuit.
To avoid causing a fire or an electric shock, do not put things on or
damage the power cords.
When or after installing the product, do not unnecessarily pull the power
cord. If damaged, the power cord can cause a re or an electric shock.
In case the power cord is damaged, ask for a replacement through where
the product was purchased from or the ofce herein stated. Using the cord
as is damaged can cause re, an electric shock or leakage.
Be sure to perform grounding appropriately. Inappropriate grounding can
cause an electric shock.
Be sure to use fuses meeting the specied rating. Using fuses exceeding
the specied rating can cause a re or an electric shock.
Be sure that connections such as IC BD are made properly. Insufficient
insertion can cause an electric shock.
Specication changes, removal of equipment, conversion and/or addition,
not designated by SEGA are not permitted.
Failure to observe this may cause a fire or an electric shock. Non-
compliance with this instruction can have a bad inuence upon physical
conditions of the players or the onlookers, or result in injury during play.
SEGA shall not be held responsible for damage, compensation for damage
to a third party, caused by specication changes not designated by SEGA.
Do not perform any work or change parts not listed in this manual. Doing
so may lead to an accident.
If you need to perform any work not listed in this manual, request work
from the ofce indicated in this manual or the point of purchase, or inquires
for details.
Be sure to perform periodic maintenance inspections herein stated.

HANDLING PRECAUTIONS
2 3
HANDLING PRECAUTIONS
1 1
For the IC board circuit inspections, only the use of a logic tester is
recommended. Using a Multi Tester or General Purpose Tester may result in
damage to IC Circuits.
Static electricity from your body may damage some electronics devices
on the IC board. Before handling the IC board, touch a grounded metallic
surface so that the static electricity can be discharged.
This video gaming cabinet utilises a motorised steering feedback system.
Do not attempt to service this part or any other part in close proximity to the
steering mechanism whilst power is applied.
Some parts are not designed and manufactured specifically for this game
machine. The manufacturers may discontinue, or change the specications of
such general-purpose parts. If this is the case, SEGA cannot repair or replace
a failed game machine whether or not a warranty period has expired.
CONCERNING THE STICKER DISPLAY
This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and Electrical Speci-
cations. It also has a Sticker describing where to contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker.
The Serial Number indicates the product register. Identical machines could have different parts depending on the
date of production. Also, improvements and modications might have been made after the publication of this
manual. In order to ensure you order the correct parts, mention the Serial No. when contacting the applicable places.
CONCERNING WARNING DISPLAYS
This SEGA product has warning displays on stickers, labels and/or printed instructions adhered/attached to or in-
corporated in the places where a potentially hazardous situation could arise. The warning displays are intended for
accident prevention for customers and for avoiding hazardous situations relating to maintenance and servicing work.
Some portions of the cabinet contain high voltage and may cause accidents if touched. When performing mainte-
nance, be very careful of the warning displays. It is especially important that any complex repair and replacement
work not mentioned herein should be performed by those technical personnel who have knowledge of electricity and
technical expertise.
In order to prevent accidents, caution any customer ignoring the warnings to cease and desist immediately.
440-DS0010UK
440-CS0186-01UK
440-CS0030UK
440-WS0011UK
440-CS0030UK
440-CS0030UK
LB1046421-7988-91UK
INSIDE
440-DS0010UK

PRECAUTIONS REGARDING INSTALLATION LOCATION
4 5
PRECAUTIONS REGARDING INSTALLATION LOCATION
2 2
2 PRECAUTIONS REGARDING INSTALLATION
This product is an indoor game machine. Do not install it outside. Even indoors,
avoid installing in places mentioned below so as not to cause a fire, electric
shock, injury and/or malfunction.
Places subject to rain or water leakage, or places subject to high humidity in the
proximity of an indoor swimming pool and/or shower, etc.
Places subject to direct sunlight, or places subject to high temperatures in the
proximity of heating units, etc.
Places filled with inflammable gas or vicinity of highly inflammable/volatile
chemicals or hazardous matter.
Dusty places.
Sloped surfaces.
Places subject to any type of violent impact.
Vicinity of anti-disaster facilities such as re exits and re extinguishers.
Areas where the temperature exceeds the applicable temperature (ambient
temperature) range of 5 to 30 degrees centigrade.
LIMITATIONS OF USAGE
Be sure to check the Electrical Specifications. Ensure that this product
is compatible with the location's power supply, voltage, and frequency
requirements. A plate describing Electrical Specifications is attached to the
product. Non-compliance with the Electrical Specications can cause a re and
electric shock.
This product requires a breaker and earth mechanism as part of the location
facilities. Using the product without these can cause a re and electric shock.
Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area). Non-
compliance with the Electrical Specications can cause a re and electric shock.
Be sure to use an independent power supply equipped with an earth leakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreak of re if a power surge occurs.
Putting many loads on one electrical outlet can cause generation of heat and a
re resulting from overload.
When using an extension cord, ensure that the cord is rated at 7A or higher (AC
100 V ~ 120 V area) and 3A or higher (AC 220 V ~ 240 V area). Using a cord rated
lower than the specied rating can cause a re and electric shock.
Securing a safe area for operation as described in this manual will ensure
safe operation for players and observers.
SEGA shall not be held responsible for damage or compensation for damage
to a third party, resulting from the failure to observe this instruction.
For the operation of this machine, please secure a minimum area of 1.4m (D) and
1.44m (W)
Be sure to provide sufcient space specied in this manual. Do not allow objects
to block the ventilation ports. It can cause generation of heat and a re.
Sufcient space either side of the playing area must be allowed for the player to
enter or exit the game safely.
OPERATION AREA (SINGLE CABINET)
0.15m
1.4m
1.44m
0.15m
0.15m

6
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
To install this product, the entrance must be at least 0.85m in width and 2.73
m in height.
Do not attempt to push/pull the machines whilst holding onto the Controller
or Assy Billboard. This may result in part damage and or personal injury.
2.73m
0.85m

PRECAUTIONS REGARDING PRODUCT OPERATION
7
3
In order to avoid accidents, check the following before starting the operation:
• Toensuremaximumsafetyfortheplayersandthecustomers,ensurethat 
 wheretheproductisoperatedhassufcientlightingtoallowanywarningsto
 beread.Operationunderinsufcientlightingcancausebodilycontactwith
 eachother,hittingaccident,and/ortroublebetweencustomers.
• Itissuggestedtoensureaspaceallowingtheplayerswhofeelsickwhile 
 playingthegametotakearest.
• Checkifalloftheadjustersareincontactwiththesurface.Iftheyarenot,
 theCabinetcanmoveandcauseanaccident.
• Donotputanyheavyitemonthisproduct.Items,ifplacedonthisproduct
 mayfallandcauseinjurytotheplayer/observer.
• Donotclimbontheproduct.Climbingontheproductcancausefalling 
 downaccidents.Tocheckthetopportionoftheproduct,useastepladder.
• Toavoidelectricshock,checkthatalldoorsandcoversareinplaceandin
good condition
• Toavoidelectricshock,shortcircuitandorpartsdamage,donotputthe 
 followingitemsonorintheperipheryoftheproduct.Flowervases,  
 owerpots,cups,watertanks,cosmetics,andreceptacles/containers/ 
 vesselscontainingchemicalsorwater.
3 PRECAUTIONS REGARDING OPERATION
To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.
ADJUSTER
Fasten the nuts in an
upward direction.
Keep Casters at floor level -
Adjust to come into contact with floor ADJUSTER
CASTER

PRECAUTIONS REGARDING PRODUCT OPERATION
8 9
PRECAUTIONS REGARDING PRODUCT OPERATION
3 3
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors
and players.
• Forsafetyreasons,donotallowanyofthefollowingpeopletoplaythegame.
• Thosewhohavehighbloodpressureoraheartproblem.
• Thosewhohaveexperiencedmuscleconvulsionorlossofconsciousness 
 whenplayingvideogames,etc.
• Thosewhohaveneckorspinalcordproblems.
• Thosewhoareintoxicatedorundertheinuenceofdrugs.
• Pregnantwomen.
• Thosewhoarenotingoodhealth.
• Thosewhodonotfollowtheattendant’sinstructions.
• ThosewhocannotgrasptheControlUnitsecurelybecauseofimmobilityin
 ngers,handsorarms.
• Personswhodisregardtheproduct'swarningdisplays.
• Thisproductisintendedforasingleplayeronly.Havingtwoormore
 personssimultaneouslyplayingthisproductcanresulttoinjurytotheplayer
 andpossibledamagetotheproduct.
• Evenplayerswhohaveneverbeenadverselyaffectedbylightstimulusmight
 experiencedizzinessorheadachedependingontheirphysicalcondition 
 whenplayingthegame.
• Smallchildrenareespeciallylikelytoexperiencethesesymptoms. 
 Cautionguardiansofsmallchildrentokeepwatchontheirchildrenduring
 play.
• Instructthosewhofeelsickduringplaytohaveamedicalexamination.
• Toavoidinjuryfromfallsandelectricshocksduetospilleddrinks,instructthe
 playernottoplaceheavyitemsordrinksontheproduct.
• Toavoidelectricshocksandshortcircuits,donotallowcustomerstoput 
 handsandngersorextraneousmatterintheopeningsoftheproductorsmall
 openingsinoraroundthedoors.
• Toavoidfallsandresultinginjury,immediatelystopthecustomerfromleaning
 againstorclimbingontheproduct,etc.
• Toavoidelectricshockandshortcircuit,donotallowcustomerstounplugthe
 powerplugwithoutajustiablereason.
• Instructtheguardiansofsmallchildrentokeepaneyeontheirchildren.
• Childrencannotsensedanger.Allowingsmallchildrentogetnear 
 aplayerwhoisplayingthegamecouldresultinthechildrenbeingbumped,
 struckorknockeddown.
DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)
• Itisrecommendedthatwettowels(papertowels)beprovided.
• Toavoidelectricshock,ensurethatallcoversandpanelsareundamaged
 andtted.Donotoperatewithcoversremoved.
• Toavoidelectricshock,shortcircuitand/orpartsdamage,donotputthe 
 followingitemsonorintheperipheryoftheproduct.
• Flowervases,owerpots,cups,watertanks,cosmetics,andreceptacles/ 
 containers/vesselscontainingchemicalsandwater.
• Toavoidinjury,besuretoprovidesufcientspacebyconsideringthe 
 potentiallycrowdedsituationattheinstallationlocation.Insufcientinstallation
 spacecancausemakingbodilycontactwitheachother,hittingaccidents,
 and/ortroublebetweencustomers.
• EverydaywhencleaningtheControllers,inspectthecontrollersandmakesure
 thattherearenocracksinthesurface,andthatthefasteningscrewsarenot
 loose.Ifthegameisplayedwithcracksorloosescrews,itcancauseinjuries
 totheplayer.

10
PART DESCRIPTIONS
4
4PART DESCRIPTIONS
Handle Tail
Billboard
Snake Body
Snake Head
Console Cabinet
Console Lid
Ladder Artwork
Superwin LED
Speakers
Tickets Dispenser
Cash Box Door
Tracker Unit
Win Line
Service Door
Test, Service and Volume
Below is a diagram which outlines and identies certain key components.
Please refer to these terms when speaking to technical or fault nding departments or when
ordering raplacement or spare parts.

ACCESSORIES
11
5
5ACCESSORIES
Conrm that the accessories listed in the table below are present when setting up the product.
Accessories marked “Spare” in the note column are consumable items but included as spares.
DESCRIPTION: OWNER’S MANUAL
Part No. (Qty.): 420-00XXUK(1)
Parts not labeled with part numbers are as yet
unregistered or cannot be registered. Be sure to handle
all parts with care, as some parts are not available for
purchase separately.
POWER CORD
LM1227 (1) <UK>
LM1246 (1) <EU>
or
LM1226 (1) <US>
For installation. See chapter 6.
440-CS0186UK
Sticker C Epilepsy Multi (1)
KEY
(2)
For the cashbox door
(Located inside the coin chute door at time
of shipment)
KEY MASTER
220-5575-01UK (4)
For operating/closing the doors

12
ACCESSORIES
5
FEATURE BAND (2)
SL-1201-01UK - FEATURE BAND £2/€2/$2
SL-1201-03UK - FEATURE BAND .50p/.50¢
For differnt prize values

ASSEMBLY AND INSTALLATION
13
6
6 ASSEMBLY AND INSTALLATION
• Performassemblyworkbyfollowingtheprocedurehereinstated.Failureto
complywiththeinstructionscancauseelectricshock.
• Performassemblyasperthismanual.Sincethisisacomplexmachine,
incorrectassemblingcancauseanelectricshock,machinedamageand/or
improperfunctioningasperspeciedperformance.
• Whenassembling,morethanonepersonisrequired.Dependingonthe
assemblywork,therearesomecasesinwhichworkingbyonepersonalonecan
causepersonalinjuryorpartsdamage.
• Ensurethatconnectorsareproperlyconnected.Improperconnectionscan
causeelectricshock.
• Becarefulnottodamagethewires.Damagedwiresmaycauseelectricshock
orshortcircuitorpresentariskofre.
• Donotunnecessarilypushthedisplayscreen.
• Thisworkshouldbecarriedoutbysitemaintenancepersonnelorother
qualiedprofessionals.Workperformedbynon-technicalpersonnelcancausea
severeaccidentsuchaselectricshock.Failingtocomplywiththisinstructioncan
causeasevereaccidentsuchaselectricshocktotheplayerduringoperation.If
noonewithpropertechnologicalexpertiseisavailable,requestservicefromthe
ofceindicatedinthisdocumentorthepointofpurchasesoastoensuresafety.
• Providesufcientspacesothatassemblingcanbeperformed.Performingwork
inplaceswithnarrowspaceorlowceilingmaycauseanaccidentandassembly
worktobedifcult.
• Toperformworksafelyandavoidseriousaccidentsuchasthecabinetfalling
down,donotperformworkinplaceswherestep-likegradedifferences,aditch,
orslopeexist.
• Thisproductdoesnotuseanyconnectorsotherthanthoseconnectedtoand
usedbythegameboardwhenitleavesthefactory.Donotneedlesslyconnect
wirestounusedconnectors.Thiscouldleadtooverheating,generationofsmoke
andburnrelatedinjuries.
• Handlemoldedpartswithcare.Excessiveweightorpressuremaycausethem
tobreakandthebrokenpiecesmaycauseinjury.
• To perform the operation safely and accurately you must use a safe, steady
footstoolorstepladder.Workingwithoutthismayleadtoafallandpossibleinjury.

ASSEMBLY AND INSTALLATION
14 15
ASSEMBLY AND INSTALLATION
6 6
020-000612-0C M6X12 SKT CAP CRM (2)
030-000830-SB M8x30 BLT W/S BLK (4)
030-000635-S M6x35 BLT W/S PAS (9)
These xings are located within their respective
xing points within the cabinet.
These xings are located within their respective
xing points within the cabinet.
These xings are located within their respective
xing points within the cabinet.
These xings are located within the cashbox
068-852216-0B M8 WSHR 22OD FLT BLK (4)
Required xings and where to nd them.
Fixings required for Billboard Installation.
Fixings required for Snake Body installation (located within the Snake Body segments)
Tools required for installation
• Billboardweighsapproximately10kgonceassembled.Haveatleast2people
duringthisoperation.Workingalonecouldresultinpersonalinjuries,etc.
• Toperformworksafelyandsecurely,besuretoprepareastepwhichisina
safeandstablecondition.Performingworkwithoutusingastepmayleadtoinjury
ofdamagetocomponents.
Allen Key nos 4, 5 and 6 (M5) (M6) (M8)
- Attaching Billboard Panel to Assy Billboard.
Adjustable Spanner / Wrenck
- Adjust Leg Levellers
M8 Socket wrench or Spanner
- Attaching Billboard
Step or Step Ladder
6-1 INSTALLING THE CABINET

ASSEMBLY AND INSTALLATION
16 17
ASSEMBLY AND INSTALLATION
6 6
• Billboardweighsapproximately10kgonceassembled.Haveatleast2people
duringthisoperation.Workingalonecouldresultinpersonalinjuries,etc.
• Toperformworksafelyandsecurely,besuretoprepareastepwhichisina
safeandstablecondition.Performingworkwithoutusingastepmayleadtoinjury
ofdamagetocomponents.
1
Identify parts required for installation. Remove the Rear Cover (Back Door)
2
Remove the (4) M8x30 BLT BLK, (2) from the rear of the cabinet whilst holding onto the Billboard Bracket
to prevent it from fallling, and (2) from the inside ceiling of the cabinet near the Billboard Bracket reccess.
3
Lift the Billboard Bracket into postion and rex using the same xing.
6-1-1 ASSEMBLING THE BILLBOARD
4
Using (2) people, carefully lower the Billboard (taking care not to trap wires) over the Billboard Bracket
and secure into place.
Remove M8x30 Hex Blt Blk (2) Remove M8x30 Hex Blt Blk (2) from roof of cabinet (inside)
Fit and secure the (2) M6x12 Socket
Cap Screws into locations shown
Connect harnesses
Ret M8x30 Hex Blt Blk (2)
from roof of cabinet (inside)
Ret M8x30 Hex Blt Blk (2)
Remove the rear cover
Snake Body
Billboard
Billboard Bracket (1)
Fixing Points
Lower the Billboard into position