SelectBlinds CORDLESS FAUXWOOD BLIND User manual

Step 1. Check Package Contents
Part Quantity
aMounting Bracket 2 (shades up to 33" wide)
3 (shades up to 48" wide)
4 (shades up to 72" wide)
b
1 1/4" Screw 8 (shades up to 33" wide)
12 (shades up to 48" wide)
16 (shades up to 72" wide)
Step 2. Tools Required
Step 3. Bracket Location and Installation
CORDLESS FAUXWOOD BLIND
INSTALLATION INSTRUCTIONS

Step 4. Secure the Head Rail
‧
Blind can be inside or outside mounted.
For Inside mount, minimum 3" depth is required.
Step 5. Operate Cordless Fauxwood Blind
‧
To lower the shade : grip bottom rail and pull down to the desired length.
‧To raise the shade : grip bottom rail and lift towards head rail to desired height.
‧
To adjust the angle of the slats : grip bottom rail and gently pull down or lift up
to rotate the slats.
IMPORTANT !
Always lower and raise at the center of the blind to assure that
the bottom rail of remains even.
RAISING FROM THE LEFT OR RIGHT HAND SIDE OF BOTTOM
RAIL WILL CAUSE INNER CORDS TO TANGLE IN RETRACTING
MECHANISM AND WILL MAKE BLIND INOPERABLE.
If the blind is not able to raise to the top, try use two hands to operate the
blind as illustrated above.
Maintenance For Your Cordless Blind
To maintain optimal performance of the springs that make your cordless blind
function, lift and lower your blind through its full range of motion – all the way
up and down –every day if possible.