Senco FinishPro 41 XP User manual

FinishPro® 41XP
XtremePro™15 Gauge Finish Nailer
DA
2 21/413/411/211/4 21/2
2
Extreme work calls for extreme tools, and the
FinishPro 41XP is up to the challenge! With a variety
of features designed to make any job easier, the
FinishPro 41XP is ideal for the most demanding Pro.
Applications:
Interior trim, exterior trim, crown molding, base
molding, door and window casings, cabinets, chair
rails, hardwood flooring
FinishPro®41 Features and Benefits:
• Two-year limited warranty
• Adjustable depth-of-drive
• NeverLube® technology – no lubrication required
• Easy-clear latch – to clear jams fast
• No-mar pads with onboard storage to protect work
materials
• Magnesium housing - lightweight and comfortable
to use all day
• Comfort and convenience features include:
overmold comfort grip, overmold trigger, 360°
adjustable exhaust
• Construction ruler – for quick measurements
• Advanced belt hook – convenient storage
Fastener Specifications:
Gauge: 15
Fastener Range: 1-1/4” – 2-1/2”
Finish: Bright Basic/Galvanized nails
Specifications:
Item”: 1Z0001N Sequential Actuation (Restrictive)
Tool Weight: 4 lbs (3.6 kg)
Height: 11-5/8” (249 mm)
Length: 13” (330 mm)
Nail Capacity: 100
Reg. Operating Pressure: 70-120 psig
Mode of Operation: Tool is available with either contact
actuation or sequential trigger mechanism
Hose Fitting: 1/4" NPT
®
©2007 Senco Products, Inc. www.senco.com

Construction Ruler –
For quick measurements
Overmold Grip –
Reduces vibration and fatigue,
increases productivity
Magnesium housing –
- lightweight
No-Mar Pad –
Protects woodwork
Extra Onboard –
No-Mar Pads
Easy-Clear Guide Body –
To clear jams fast
Overmold Trigger –
Reduces fatigue
Belt Hook –
Lets the tool go
where you go
FinishPro® 41XP
XtremePro™ 15 Gauge Finish Nailer
®
©2007 Senco Products, Inc. www.senco.com
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions. For additional information on trigger systems and
how SENCO will save you time, reduce costs, and increase quality, call our toll-free
Action Line: 800-543-4596 to find your nearest Authorized Senco Dealer, Distributor
or visit our web site at: www.senco.com
Adjustable Exhaust –
No tools required,
quiet design
SENCO Exclusive
NeverLube® Design –
Keeps the work
surface free of oil
Variable Thumb wheel Adjustable
Depth-of-Drive –
Allows user to achieve the right
depth of countersink
Choose the right trigger system for your specific needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in the
following a sequence - depress the safety element at the nose of tool against the work surface
then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work
surface before starting the sequence again. This trigger is recommended and acceptable for most
applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates in the
following sequence- pull the trigger first and keep the trigger pulled while moving the tool along
the work surface with a bouncing motion, depressing the safety element at the nose of the tool
against the work surface where the fastener is to be driven. This trigger is recommended for use
by trained professionals only in high production or volume applications.