Senco SN951XP User manual

Genuine SENCO Fasteners Available:
Framing Nailer
Clipped Head SN951XP
Item #: 5B0001N
UPC: 741474062230
Power: 1002 in. lbs.
Tool Weight: 8.8 lbs. (3.9 kg)
Height: 13.8" (351 mm)
Length: 17.3" (439 mm)
Width: 4.8" (122 mm)
Collation: 34˚ strip
Capacity: 75-95 nails
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Selectable trigger switch allows either
sequential or contact actuation.
Air Inlet: 3/8" NPT
The SN951XP is an exceptionally well balanced framing
nailer engineered to power 3½" nails into the toughest
engineered lumbers. Whether you are driving ring, screw or
smooth-shank clipped head nails this tool has the power
and fastener range to dominate the toughest jobs. SENCO
XP tools are specically engineered for demanding
professionals working in the roughest environments. Built
with enhanced features and superior components - SENCO's
XP tools can be counted on and are backed by a 5-year
limited warranty.
Engineered lumber, framing, sheathing, truss
building, sub-ooring and decks. Other appli-
cations include crate and box assembly, pallet
making, furniture frame assembly and fencing.
®
©2008 Senco Products, Inc. www.senco.com
• 20% more powerful than standard
framing nailers - drives up to a 4" x .131
nail.
• Reduced jams and mis-feeds - Patented
TrueDrive™ magazine.
• Contact or sequential trigger actuation -
simply press and slide.
• Tool free depth of drive for precise nail
setting into varying materials.
• Low prole design easily ts between
studs and joists.
Tool Specications:
Features and Benets:
Applications:
Carton
Length Item Code Count Finish
23⁄8x.113 GE24APBK 5.M Bright
23⁄8x.113 M002078 2.M Bright
23⁄8x.113 GE24AABK 2.5M Galv
23⁄8x.113 M002079 2.M Galv
3 x.120 HE27AABKN2.M Galv
2x.113 GE21ASBK 2.M Hot Dip
23⁄8x.113 GE24ASBK 2.M Hot Dip
3 x.120 HE27ASBK 2.M Hot Dip
2x.113 GE21AGBK 1.M Stainless
3 x.120 HE27AGBK 1.M Stainless
Ring-Shank
Smooth-Shank
Carton
Length Item Code Count Finish
2 x .113 GC21APBKN 5.M Bright
2 x .113 M002080 2.M Bright
23⁄8x .113 GC24APBK 2.5M Bright
23⁄8x .113 M002081 2.M Bright
2½ x .113 GC25APBK 5.M Bright
3 x .120 HC27APBKN 3.M Bright
3 x .120 M002023 2.M Bright
3 x .131 KC27APBK 3.M Bright
3 x .131 M002018 2.M Bright
3¼ x .120 HC28APBKN 3.M Bright
3¼ x .120 M002024 2.M Bright
3¼ x .131 KC28APBK 3.M Bright
3¼ x .131 M002019 2.M Bright
2¼ x .113 GC23AHAN 1.M Hardened
2 x .113 GC21AABN 6.7M Galv
23⁄8x .113 M002082 2.M Galv
2½ x .113 GC25AABN 5.M Galv
3 x .131 KC27AABK 3.M Galv
3 x .131 KC27AABN 3.M Galv
3¼ x .131 KC28AABK 3.M Galv
3¼ x .131 KC28AABN 3.M Galv
23⁄8x .113 GC24ASBK 2.M Hot Dip
3 x .131 KC27ASBK 2.M Hot Dip
3¼ x .131 KC28ASBK 2.M Hot Dip
23⁄8x .113 GC24AGBK 1.M Stainless
3 x .131 KC27AGBK 1.M Stainless
3¼ x .131 KC28AGBK 1.M Stainless
Carton
Length Item Code Count Finish
3x.120 HF27EPAN 3.1M Bright
3x.120 HF27EDB 3.1MWeatherx™2
3x.120 HF27AGBK 3.1M Stainless
Screw-Shank–Strip
Fastener Specications:
.113 – .148, Smooth 2"– 4", Screw 2" – 3 ½", Ring 2" – 3 ½"
GE (.113), HE (.120)
GC (.113), HC (.120), KC (.131), (.148)
HF (.120)

Framing Nailer
Clipped Head SN951XP
®
©2008 Senco Products, Inc. www.senco.com
*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger re) operates
in the following a sequence - depress the safety element at the nose of tool
against the work surface then pull the trigger. After each fastener is driven,
release the trigger and lift the tool o the work surface before starting the
sequence again. This trigger is recommended and acceptable for most
applications.
Contact Actuation (also known as dual action, bounce or bottom re) operates
in the following sequence- pull the trigger rst and keep the trigger pulled
while moving the tool along the work surface with a bouncing motion,
depressing the safety element at the nose of the tool against the work surface
where the fastener is to be driven. This trigger is recommended for use by
trained professionals only in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools
to ensure proper use and safety precautions. For additional
information on trigger systems and how SENCO will save you time,
reduce costs, and increase quality, call our toll-free Action Line:
800-543-4596, or visit our web site at: www.senco.com.
Unique Features of the SN951XP
Rear Two-Step Loading
Quick and easy for right or left
handed users
Aggressive Toenail Safety
Teeth grip studs with real bite for
precise positioning
Patented
TrueDrive™Magazine
Reduced jams and mis-feeds
Aluminum Housing
Lightweight, superior durability
Thumbwheel Adjustable
Depth-of-Drive
Drives nails to a precise depth in
varying materials.
20% more powerful than
standard framing nailers
Drives up to a 4” x .131 nail
Patented Drive Selector
Contact or Sequential trigger
actuation switch*