Seville Classics SHE15890B User manual

STEPS TO STACK THE RACK
1. Build another rack following the instructions above.
However, do not install the LEVELING FEET (B) on the second
(top) unit.
______________________________________________________
2. Screw the STACKING PINS (G) into the legs of the top unit.
Remove all CAPS (C) from the original (base) unit.
______________________________________________________
3. Lift the top unit up and onto the base unit, lining up the pins
with the holes at the four top corners so that they can be
inserted into each other. Be sure everything is in alignment and
then press down firmly on the top unit so that it sits tightly into
and onto the base unit.
WEIGHT CAPACITY PER SHELF: 13.6 kg/ 30 lb
ASSEMBLY INSTRUCTIONS
3-TIER ADJUSTABLE SHOE RACK (Model No. 15890)
www.sevilleclassics.com
©2015 Seville Classics, Inc.
NOTE: Drawing shows 2 units
stacked vertically. Do not exceed
maximum height of 2 stacked units.
WARNING: Do not sit on the rack. Do
not drop heavy items on the rack.
Place heavier items on the lower
shelves and lighter ones on the top
shelves. Do not move the rack while
loaded.
G
TF150617

Important: Retain for future reference, read carefully.
A 2x
B4x
C 4x
D 3x
E 12x
F1x
G 4x
Please make sure you have all the parts before assembly
STEPS TO ASSEMBLE THE RACK
Unpack and remove all parts from the box. If there are missing or broken parts, please
contact our CUSTOMER SERVICE.
Made in China
1. Screw the LEVELING FEET (B) into the legs of each
SIDE FRAME (A). Insert the CAPS (C) into the top holes
of each side frame.
_______________________________________________________
2. Using four SCREWS (E) and the HEX KEY (F) loosely secure
the bottom SHELF (D) to each side frame. Once all the screws are
in place, tighten down all the screws.
Note: The counter sink holes should face outward so the screw
head will be flat when tightened.
Tip: The shelf can be assembled tilted or flat. Rotate shelf 180
degrees before installation to adjust the position.
_____________________________________________________
3. Once all shelves are securely in place, adjust the leveling feet
by screwing them in or out to obtain a level rack.
A
C
B
A
D
E