Seville Classics WEB651 User manual

Model: WEB651
Thank you for choosing Seville Classics! We hope that you enjoy your new garment rack. Please read through this
user guide for parts list, assembly instrucons, frequently asked quesons and contact informaon.
072020
4-Tier Freestanding Garment Rack Closet Organizer

Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
A. Top right frame (1)
B. Top center frame (1)
C. Top le frame (1)
D. Right base frame (2)
E. Le base frame (1)
F. Short poles (8)
G. Base poles (2)
H. Top pole (1)
I. Top shelf (1)
J. Top mid. shelf (1)
K. Lower mid. shelf (1)
L. Boom shelf (1)
M. Wide shelf (1)
N. Foot (4)
O. Washer (2)
P. Clip (6)
Q. Frame screw (6)
R. Wide shelf screw (4)
S. Shelf screws (16)
T. Hex screws (18)
U. Connector screws (2)
V. Hex key (1)
1

Step 1.
Slide TOP FRAMES (A, B, C) onto LOWER FRAMES (E, D).
Aach with SCREWS (Q) to make LEFT FRAME (C, E),
CENTER FRAME (B, D), and RIGHT FRAME (A, D).
Clip FEET (P) onto boom of frames.
Step 2.
Screw CONNECTOR SCREWS (Q) into ends of two
SHORT POLES (F) with long ends outside. Insert the long ends
through the boom screw holes on the CENTER FRAME (B, D).
Aach with HEX SCREWS (T) to RIGHT FRAME (A, D).
Connect the right and center frames from with
SHORT POLES (F) using HEX SCREWS (T) and HEX KEY (V).
Step 3.
Screw BASE POLES (G) to the CONNECTOR SCREWS (Q).
Aach to LEFT FRAME (C, E) with HEX SCREWS (T).
Fit HEX SCREW (T) through screw hole in top of le frame.
Fit curved side of WASHER (O) over screw threads all the way
to the frame. Screw TOP CROSSBAR (H) onto threads.
Aach TOP CROSSBAR (H) to middle frame with WASHER (O)
and HEX SCREW (T).
Tighten all hex screws unl snug.
Assembly Instrucons
2

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
072020
Step 4.
Aach SHELVES (I, J, K, L) from top to boom with
SHELF SCREWS (S).
Step 5.
Aach FEET (N) to boom of WIDE SHELF (M) with
WIDE SHELF SCREWS (R).
Place WIDE SHELF on BASE POLES to nish.