ramia SCHOOL Series User manual

A1-12pcs A2-32pcs B1-6pcs B2-8pcs C1-12pcs C2-4pcs C3-8pcs D1-80psc D2-4pcs E1-12pcs
12x40mm 10x40mm 5x90mm 4x20mm M10x100 M10x120 M8x100 M10 M10 M10
E2-16pcs E3-4pcs F-4pcs G1-8pcs G2-8pcs G3-8pcs G4 - 16pcs G5 - 4pcs G6 - 8pcs
Vice
fitting kit
Vice
attaching
wood
Wooden protectors
M8 M10 4x40 mm M5x25mm M5 8x60mm
Assembly Instructions - SCH-X
Attention:
ENG
Workbench is made of high quality beech wood guaranteeing maximum resistance and long service life.
NOTICE:
The bench must notbe left in damp or humid conditions which will cause movement in the wood. Recommended
humidity level max. 60%.
If you bought workbench without surface treatment, we recommend you to finish the bench by colourless varnish or
oil including the bottom ofworkbench. Varnish (oil) prevents absorption of surrounding moisture. Don´t forget to
repeat surface treatment each year including holes for bench dogs.
To increase the stability of your workbench we recommend you to bolt the bench to the floor.
Each 6 months tighten all screws and bolts.
Ramia s.r.o., Czech Republic, Tel: [phone], fax: [phone], www.ramia.cz

Don´t glue dowels. Dowels have only guiding function.
Ramia s.r.o., Czech Republic, Tel: [phone], fax: [phone], www.ramia.cz

Ramia s.r.o., Czech Republic, Tel: [phone], fax: [phone], www.ramia.cz

Attaching the Vices
G5 (wooden
protectors) +
G1,G2,G3 G6 -vice attaching
wood
Bench top with
vice cut out
(shown upside
down)
G4+D1 (screws with
washers)
Ramia s.r.o., Czech Republic, Tel: [phone], fax: [phone], www.ramia.cz