Sharp DW-D20A User manual

Model
DEHUMIDIFIER
OPERATION MANUAL
DW-D20A
High - Density 7,000
The number in this technology mark refers to the approximate
quantity of ions per cm3of air released from the dehumidifier
equipped with a high-concentration Plasmacluster ion generating
unit which was measured at the center point (1.2 meter height
above the floor) of high concentration Plasmacluster 7,000
applicable floor area room (temperature 20°C, humidity 50%)
when the dehumidifier was placed against the wall and runs in
laundry deodorizing mode with vertical swing “down” and
horizontal swing “off”.
＊
＊
DEHUMIDIFIER DW-D20A OPERATION MANUAL
Device of this mark is a trademark of
Sharp Corporation.
Plasmacluster is a registered trademark
or a trademark of Sharp Corporation.
FEATURES
FAQS
SAFETY PRECAUTIONS
PARTS NAME
BEFORE USE
CONTENTS PAGE
●
●DEHUMIDIFYING
●STOP
●SWING LOUVER
●CHILD LOCK
●OFF TIMER
●PLASMACLUSTER ION ON/OFF
●NOTIFICATION SOUND OFF
Thank you for purchasing this SHARP product.
Please read this Operation Manual carefully for proper usage.
Please be sure to read “SAFETY PRECAUTIONS” before use.
Keep this manual properly for future reference.
HOW TO OPERATE
EASY-TO-USE FUNCTIONS
HOW TO DRAIN
●FILTER/SENSOR
●WATER TANK
●MAIN UNIT
●WHEN NOT USING FOR A LONG
PERIOD OF TIME
CARE AND MAINTENANCE
SPECIFICATIONS
TROUBLESHOOTING
●WATER TANK
●CONTINUOUS DRAINAGE
2
3
4
8
10
12
14
12
13
13
14
14
15
15
15
18
19
20
20
18
21
22
16
16
17
GETTING STARTED
HOW TO USE
LAUNDRY DRYING / DEODORIZING
CARE AND MAINTENANCE
WHEN NECESSARY

FEATURES
2
LAUNDRY DRYING
PLEASANT
DEHUMIDIFYING
AUTO DEHUMIDIFYING
160° VERTICAL
90° HORIZONTAL
AUTO LOUVER
dž
160°
90°
A Powerful Dehumidifier with a High Concentration
of Plasmacluster Ions for Cleaning, Quick Drying,
and Deodorizing Room-dried Laundry
＊
High - Density 7,000
QUICK LAUNDRY
DRYING
Quickly dry laundry with
maximum air flow, and
stop automatically.
Maintain desired
humidity for a pleasant
room atmosphere.
Widely dry and dehumidify
laundry with wide louvers.
This shows the air flow range when vertical
swing is set to WIDE and horizontal swing
is set to ON, which is different from the
louver swing range.
LARGE WATER TANK
ECO LAUNDRY DRYING
LAUNDRY DRYING
Effectively dry laundry by
combining dehumidity and
ventilation, and stop
automatically.
Ensure plenty of dehumidification
with a 4.2L tank.
Also able to continuously drain.
＊The number in this technology mark refers to the approximate quantity of ions per cm3of air released from this product which
was measured at the center point (1.2 meter height above the floor) of high concentration Plasmacluster 7,000 applicable
floor area room (temperature 20°C, humidity 50%) when the dehumidifier was placed against the wall and runs in laundry
deodorizing mode with vertical swing “down” and horizontal swing “off”.
džThe air flow seems to get stronger on its own?
When the room temperature is 15°C or lower (Air flow only) in order to prevent frost forming inside.
When the room temperature is 38°C or above (Air flow only) in order to lower the internal temperature.
FAQs
Will the room get warm?
Please read “TROUBLESHOOTING” for further details.
There is a sound at the start of operation/during operation/when the unit stops
It is the sound of compressor operation or refrigerant (coolant) circulation.
The sound seems too loud?
3
The CURRENT HUMIDITY display seems wrong?
Pages 11,17
FEATURES / FAQs
Warm air will be coming out from the front air outlet, and when used in an
enclosed room, the room temperature will go up.
I would like to continuously operate the unit in dehumidifying
mode. Is continuous drainage possible?
Continuous drainage is possible by using a commercially available hose
(inner diameter 15mm).
When the temperature is high, or when the temperature or humidity is low, air flow mode will operate,
and the unit will not dehumidify. The water will not be collected in the tank during this time.
The water does not accumulate in the tank. Is the unit dehumidifying?
Page 23
The CURRENT HUMIDITY display is only for reference. (The value will not necessarily be the same
with other devices.)
When the humidity suddenly changes immediately after the laundry dry mode starts, the display
might be different from the actual humidity.
When the humidity is 31% or lower, the display will show [Lo]; and 91% or above will show [Hi].
Even if the dehumidifying (Auto/Lo) operation is set, the air flow will increase automatically
during the following situations:
●
●
■
Pages 22, 23
Page 22

SAFETY PRECAUTIONS
●
●
●
●
●
●
●
●
WARNING
WARNING
Power Plug, Power Cord
4
■The degree of injury or
damage resulting from
incorrect use or operation
while ignoring the
indicated matters is
classified and explained
with the following symbols.
To prevent any possible injury to
persons or damage to property, be
sure to follow the basic safety
precautions, including the following:
Indicates a potentially
hazardous situation
which, if not avoided,
could result in
serious injuries or
even death.
CAUTION
Indicates a potentially
hazardous situation
which, if not avoided,
could result in injury
to persons or damage
to property.
■The precautions to be
observed are indicated
with the following
symbols and signs.
This symbol
indicates a
prohibited
action.
This symbol
indicates a
mandatory
action.
●Make sure there is no dust on the power
plug and insert it into the outlet completely.
Any dust around the power plug should be
wiped off with a dry cloth periodically.
(Accumulated dust may result in poor insulation
from humidity, etc., thereby causing fire or
electric shock.)
Do not damage the power cord.
Do not process, forcibly bend, pull by force,
twist or bind the power cord.
Do not place heavy objects on the power
cord, or apply too much force to it.
Do not damage the power cord while moving
the unit on its casters.
(Otherwise, fire or electric shock may be caused.)
Do not plug/unplug the power cord with wet
hands.
(Otherwise, electric shock may be caused.)
Do not connect the unit from extension cord
or multiple wiring with other electronic
appliances.
(Otherwise, electric shock, fire or heat may be
caused.)
Do not use other than the rated voltage
(220-240V).
Do not operate or stop the unit by using the
power plug.
(Otherwise, electric shock or fire may be caused.)
To prevent fire, electric shock or injury
●
●
In Case Of An Exception (e.g., burnt smell)
Before Maintenance
●
●
●
●
●
During Usage
Do not put fingers or foreign objects (pin, needle, stick, etc.) into the air
outlet or air intake.
(The fan is rotating at high speed inside. Injury, electric shock and malfunction
may occur.)
Do not make modifications. Disassembly, repairing, modifications
shall not be made by a person other than the service engineer.
(Otherwise, fire, electric shock or injury may be caused.)
Do not place spray cans close to the main unit. Do not use flammable
hazardous materials (gasoline, thinner, etc.) near the main unit.
(Otherwise, ignition of fire, explosion may occur.)
Do not directly apply air to human bodies for a long period of time.
(Otherwise, sickness or health problem may occur.)
Do not place the unit near heating appliances.
(Otherwise, plastic parts will melt and fire ignition may occur.)
Be sure to immediately shut down the product, remove its power plug and
contact customer service center for repair.
(Otherwise, electric shock or fire may be caused.)
For repairs, please consult the store where you purchased the product or
the nearest customer service center.
(An incomplete repair may cause electric shock, fire or injury.)
5
SAFETY PRECAUTIONS
●Be sure to shut the unit down and remove its power plug.
(The inner fan is rotating at high speed and may cause injury.)

6
CAUTIONIn order to prevent electric leakage and injury, and protect your household goods
Be sure to follow…
Power Plug, Power Cord
●
Always hold the power plug. when unplugging the unit.
(Otherwise, fire, electric shock, short circuit may be caused.)
If you are planning not to use the unit for a long time, unplug the power plug from
outlet for safety.
(Otherwise, electric shock, electric leakage or fire may be caused.)
●
●
●
●
●
●
●
●
●
●
During Usage
Do not knock down or drop the main unit.
Do not store or move with the main unit down on its side
(Otherwise, equipment damage or malfunction such as water/electric leakage
may be caused.)
Do not use the unit in a tight enclosed space such as closet or in between furniture.
Do not block the air outlet or air intake.
(otherwise, air flow will be obstructed, resulting in overheating or ignition.)
Do not use the product in a place where it can easily get wet or in the bathroom.
Do not wash the product directly with water.
Do not place an object with water such as a vase on top of the main unit.
For indoor use only. Do not use the unit under direct sunlight or in any
location exposed to rain and wind.
Do not leave the unit where oil or flammable gas may leak.
(Otherwise, electric shock, over-heating, electric leakage or fire may be caused.)
Do not use on a high place such as on the table.
(When the main unit falls, injury may be caused.)
Do not sit on or lean on to the product.
(Otherwise, injury may be caused from moving or falling.)
Do not use the drained water for drinking or feeding.
(Otherwise, health problems may be caused.)
Do not expose the air from this product directly to heating appliances.
(Otherwise, incomplete combustion of heating may be caused.)
Do not use for storage/special purpose for artworks or academic materials.
(Otherwise, quality degradation of stored materials may be caused.)
Do not use for long hours in a room with people.
Heat will generate during “(QUICK AUTO/ECO AUTO/CONTINUOUS) laundry
drying”/ “dehumidifying”. Increased room temperature and dryness may cause
health problems.
Look out when the following type of people is in the room.
(Baby, children, elderly, person who cannot operate this product.)
●
●
●
●
●
7
SAFETY PRECAUTIONS
NOTE
●
If there is a noise in TV/radio or radio clock does not display the correct time, move the product
away as far as possible.
(Otherwise, radio disturbance may be caused.)
●
Behind 20cm or more
Upper 50cm or more
Front 50cm or more
Sides 20cm or more
Always have plenty of room around the main unit.
(Poor ventilation may cause over-heating, fire, malfunction.)
●
●
●
●
●
●
This appliance is not intended for use by persons (include children) with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge,unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Lift up the main unit and move on easily scratched floors like tatami,
rough places and thick carpets.
Do not drag the casters to change the direction of the main unit.
(Otherwise, floor surface or carpet may be damaged.)
Before moving the main unit, always stop the operation and dispose the
water in the water tank.
Operate the unit only on level, stable surfaces.
Check for bent hose/falling height when conducting continuous drainage
and place the hose where it will securely drain.
(Inner water may leak in the room and dampen the furniture or may cause
electric shock/leakage, fire.)
When using drain hose, make sure the surrounding environment will not
fall below freezing point.
Be sure to clean the product, floor and surroundings when using the
product in a same place for a long period of time.
●
●

8
Louver (Air Outlet)
Casters (four)
Water level window
Tank knob
Tank handle
Float
Front View
Water tank
PARTS NAME
MAIN UNIT AND CONTROL PANEL
CURRENT HUMIDITY display (green)
Displays the current humidity (estimate).
Control Panel
Plasmacluster Ion ON/OFF button
Turn Plasmacluster Ion operation on/off.
CHILD LOCK indicator light (green)
Lighting... Child Lock is enabled
CHILD LOCK button
－
31% or below
…………
…
………… 91% or above
OFF TIMER indicator light (green)
"2h" lighting ... 2 hours is set for OFF TIMER.
"4h" lighting ... 4 hours is set for OFF TIMER.
"6h" lighting ... 6 hours is set for OFF TIMER.
Sets the time for OFF TIMER
Tank lid
Page 15
Plasmacluster Ion indicator light (blue)
Lighting Plasmacluster Ion is running.
Current humidity (est.) is
displayed in the unit of 1%.
Page 14
Enable/Disable Child Lock.
OFF TIMER button Page 15
Page 11
"6h" blinking ... Auto off function
operate
Page 14
Pages 16,19
Do not take off the
expanded polystyrene.
(Otherwise, the sensor
does not detect filling of
the tank.)
Located at
the inside of
the knob.
…
Sensor
(temperature and humidity sensor)
9
PARTS NAME
Power cord
Power plug
Knob (Both Sides)
Back View
Filter
Filter cover
Filter (Air Inlet)
The device starts
when the button
with ŏis pressed.
Page 11
Continuous drainage
hole (Rubber Cap)
DEODORIZE
CONTINUOUS
ECO
QUICK
STOP button
Stop the operation.
HORIZONTAL SWING button
Turn horizontal swing of the louver on/off.
LAUNDRY button
ŏ
Tank FULL indicator light (red)
Blinking The water drainage tank is full.
DEHUMIDIFY button ŏPage 13
Light off
Change the mode of
dehumidfying operation.
Dehumidifying mode
indicator light (green)
Display the operation state.
Page 16
Page 13
Page 12
Change to laundry operation
mode.
Laundry mode
indicator light (green)
Display the operation status.
Page 14
Page 14
HORIZONTAL SWING indicator light (green)
Lighting Louver automatically swings right and left.
VERTICAL SWING button
Switch the vertical swing mode
of the louver.
VERTICAL SWING indicator
light (green)
Show the swing status.
HIGH
LOW
AUTO
Off
UP
DOWN
WIDE

10
●
●
●
●
Do not use in the following places
●
dž
●
0
5
10
20
40
BEFORE USE
WHEN USING FOR THE FIRST TIME
INSTALLATION LOCATION
●
●
●
1
2
●
●
Avoid places with direct sunlight.
Level, stable place
There might be some water left in the water tank from the factory product inspection. This
is not a malfunction.
Packaging
material
Take out the product
from the box
Always hold the knob and take
out from the box.
Keep the box and packaging
materials for future product
storage.
Place it on a level,
stable place and
insert the power plug
into outlet
The louver will automatically
move and close.
May cause deformation or safety
device activation.
If there is a noise in TV/radio or
radio clock does not display the
correct time, move the product
away as far as possible.
Thick carpet or futon is a very
unstable place.
Upper 50cm
or more
Behind 20cm
or more
Front 50cm
or more
Sides 20cm
or more
Operate it in a room with
temperature from 3°C to 38°C.
The compressor will stop and will not
dehumidify when the room temperature is
lower than 3°C or higher than 38°C.
(Switch to air flow mode)
The compressor safety
device will activate and stop.
Room temp. of
approx. 3°C-38°C
To prevent the water in the
tank from freezing, the
compressor will stop the
operation.
With a lot of salt such as seaside area.
With a lot of sulfide gas such as
hot-spring area.
With a lot of machine oil.
With a lot of steam or oily
smokes.
Do not use any cosmetic products＊formulated with fluororesin or
silicone near the dehumidifier.
Plasmacluster ion may not generate if fluororesin or silicone gets into
the main unit.
Hair care products (hair coating solution, hair mousse, hair treatment),
cosmetic products, antiperspirant, antistatic products, waterproof spray,
waxing products, glass cleaner, chemical cloth, wax, etc.
11
BEFORE USE
WHAT YOU NEED TO KNOW
●
●
When moving
Knob (both sides)
●
●
Defrosting
Auto Off function
After 12 hours
[Otherwise, the surface of floor or carpet may be damaged.]
CAUTION
1
2
●
●
●
Operation stopped
Press both for 3 seconds
Caster
Beep
To cancel the Auto Off function (For continuous drainage)
Lift up the main unit and move on easily scratched
floors like tatami, rough places and thick carpets.
Stop the operation
and dispose water
in the tank
Bundle the power cord and hold
along with the knob to move.
Pulling on the power cord will
damage the cord.
Hold the knob
to move
When the room temperature falls below 15°C, the unit will automatically start defrosting in order to prevent frost
from forming inside the main unit.
Once every 45 minutes, the compressor will stop and “HIGH” air flow mode will operate (for about 12 minutes).
The lower the room temperature, the longer the compressor stop time.
The compressor will stop and will not dehumidify during defrost, and water will not be collected in the tank.
The operation will stop automatically
after 12 hours in case the unit has
been forgotten to be turned off.
(The OFF TIMER “6h” indicator
light blinks)
Start
operating
Stop
operating
To operate again, press the STOP button to
release the blinking indicator light.
The Auto Off function is set when the power plug is plugged in.
Blinking
for 5
seconds
The Auto Off timer will turn off
when you press and hold both the
OFF TIMER button and STOP
button for 3 seconds.
Once the power plug is pulled, the
Auto Off function will be set again.
Press and hold both OFF TIMER
button and STOP button for 3
seconds to restart the Auto off
function.
It will take about 3 minutes to start
dehumidifying again for re-operation.
In order to protect the unit, the compressor will not operate for 3
minutes immediately after plugging in the power plug or stopping
(QUICK/ECO/CONTINUOUS) laundry drying/dehumidifying opera-
tion. Air flow mode will operate and the unit will not dehumidify.
Air flow operation for
about 3 minutes
FULL
220V power
supply

12 13
HOW TO OPERATE
DEHUMIDIFYING
When you want to automatically dehumidify
AUTO
dž
LOW
Dehumidify with continuous operation of “HIGH” air flow.
HIGH
●
●
1
2
Long beep
Room temperature Appropriate humidity
CAUTION
[Otherwise, over-heating, fire or malfunction may be caused]
●
●
STOP
1
Beep beep
Beep
Beep
Beep
Do not block the air
outlet with clothes
Select your
desired operation
The unit will operate in AUTO immediately
after the power plug is inserted.
Unless the power plug is unplugged; the unit
will operate in the last mode that was selected.
The temperature and humidity sensor will adjust
the dehumidification amount for proper humidity
level according to room temperature.
When the room temperature is too low or too
high, it might not reach the appropriate humidity
level. Page 22
Quietly dehumidify with “LOW” air flow.
The air flow might increase depending on the room temperature. Page 3
3°C~26°C
26°C~38°C
60%
55%
Page 14
Select a louver
swing mode
The indicator light will go off and louver will
shut automatically.
Run the internal drying operation (laundry
deodorizing operation) when planning not to
use for a long time. Page 20
HIGH
AUTO
LOW
●
●
●
HOW TO OPERATE
NOTE
LAUNDRY DRYING / LAUNDRY DEODORIZING
When you want to dry your laundry quickly
1
2
●
QUICK AUTO (Auto Stop)
ECO AUTO (Auto stop)
Continuous
●
Deodorizing
●
●
●
●
Beep
Beep beep
Auto Operation
Select your
desired operation
“QUICK AUTO” will operate immediately
after the power plug is plugged in.
Unless the power plug is unplugged, the unit
will operate in the last mode that was selected.
Beep
Beep
Beep
DEODORIZE
CONTINUOUS
ECO
Dry your laundry with “Full Power” air flow. (Dry and dehumidify)
The operation will automatically stop when the humidity level falls below 55% after
about 30 minutes of operation or when the unit has operated for about 3 hours.
(A beep will sound when the operation stops and the QUICK indicator light will blink)
When you want to dry your laundry but with less
power consumption
Dehumidifying operation (compressor operation) and Air Flow operation (compressor
stopped) will alternately repeat with “HIGH” air flow and dry the laundry.
The operation will automatically stop when the humidity level falls below 60% after
about 30 minutes of operation or when the unit has operated for about 3 hours.
(A beep will sound when the operation stops and ECO indicator light will blink)
When you want to dry your laundry with continuous operation
Dry your laundry continuously with “Full Power” air flow. (Dry and dehumidify)
When you want to deodorize your laundry (Air Flow Operation)
Deodorize your laundry with “Full Power” air flow. (Air Flow Operation)
Plasmacluster ion will be “ON” even if it is set to be “OFF”.
(Plasmacluster “OFF” is not available.)
Select a louver
swing mode
Page 14
Make sure the air
blowing out from air
outlet is directly pointing
to your laundry.
The distance between
air outlet and laundry
should be10cm or more.
Stretch the wrinkles of wet laundry and dry in an airy place.
Dry thick laundry in a well ventilated place.
The drying time will be longer for low temperature room, large room, and when the quantity of laundry is large.
Auto operation (QUICK AUTO/ECO AUTO) may stop even the laundry has not been dried. Conduct Auto
operation again for more drying time.
QUICK

14
●
EASY-TO-USE FUNCTIONS
“Disable”
“Enable”
CHILD LOCK
To prevent incorrect operation by children.
●
Swing “ON” Swing “STOP”
SWING LOUVER
During operation
During operation
Louver movement angle: Approx. 160°
(Reach of wind: Approx. 180°)
UP
“WIDE” repeats “UP” and ”DOWN” movements.
Light off (STOP )
●
Beep beep
Beep
Beep
Beep
Beep Beep beep
Beep beep
Beep
Do not forcibly move the louver with hands.
Otherwise, malfunction may be caused.
RIGHT/LEFT UP/DOWN
Press the button and set the louver at the
desired position. Then the indicator light
turns off.
UP
DOWN
DOWN
WIDE
ENABLE/DISABLE
Only the following operations can be
performed when the child lock is
enabled:
During operation Stop operation,
disabling the child lock.
Stopped Disabling the child lock.
The child lock will be disabled when
the power plug is unplugged.
…
…
15
EASY-TO-USE FUNCTIONS
During operation
OFF TIMER
Select the desired time ●
●
●
●
1
1
“OFF”
“ON”
During operation
PLASMACLUSTER ION ON/OFF
Turn the Plasmacluster ion on/off.
●
●
Operation stopped
NOTE ●
NOTIFICATION SOUND OFF (Tank full/End of Off Timer/End of Auto Off function)
●
Use this function when you do not want the notification sound to sound, such as night time.
1
Press both for 3 seconds
Beep beep
Beep
Beep
Beep
Beep beep
Beep
Beep
You will hear a notification sound
(Long beep) once the preset time is
reached and the operation will stop.
The OFF TIMER indicator light will
change as the operation time
progresses.
When the water tank becomes full
during off timer operation, the
operation will stop but the off timer
counting will continue. (You may
continue the timer operation after
draining.)
To disable the off timer, press the
off timer button and turn the
indicator light off (i.e. cancel it).
Even if the Plasmacluster ion is “OFF”,
if laundry deodorizing operation is
selected, the Plasmacluster ion will
automatically turn “ON”.
A beep will sound and setting
is complete.
When both the VERTICAL SWING
button and STOP button are pressed
and held for 3 seconds again, “beep
beep” will sound and notification
sound will be set to sound again.
This setting will be canceled once the power plug
is unplugged and notification sound will sound.
Light off (cancel)
6h
4h
2h
+

16
WATER TANK
HOW TO DRAIN
Dispose water
Water tank
Drain outlet
●
●
●
●
NOTE
Blinking
●
●
1
2
3
●
●
Beep
Beep
FULL
When the water tank becomes full (approx. 4.2L), the
operation will automatically stop (Full tank stop device)
Laundry Deodorizing may be operated with a full tank. The Tank
FULL indicator light (red) will not blink during this time.
When the water tank is placed back after draining, the Tank FULL
indicator light (red) will go off and operation will start again.
Take out the
water tank
Tank knob
Pull out straight while holding
down the main unit.
Gently pull out and carefully carry
without tilting or dropping so no
water will spill.
Set the water
tank to the
main unit
Push in completely.
Gently push in.
(Rough handling may cause
malfunction.)
Always stop the operation and dispose water before moving the main unit.
(Water in the tank may spill and damage household goods.)
Clean the inside of water tank periodically (about once a week).
(Failing to clean for a long period of time may increase mold and bacteria which causes bad odor.)
17
HOW TO DRAIN
CONTINUOUS DRAINAGE
3
4
dž
dž
●
●
●
●
How to pipe the hose
2
Unplug the power plug
1
Rubber cap
Water tank
Tank knob
Hose
Drain outlet
If there is a place you
can drain nearby,
continuous drainage is
possible.
Important Notices When Using
Continuous Draining Operation.
This dehumidifier is made for household use. When
conducting Continuous Drainage, check for dirty filters (once
every two weeks) and clogging of drain hoses periodically.
Place the drain hose where the temperature will not fall
below zero.
(When the water in the hose freezes, the water inside the
main unit may leak into the room and soak household goods)
Put a net over the hose tip to prevent from insects coming in.
Auto Off function will operate after 12 hours for Continuous
Drainage as well. To release the Auto Off function, please
read “To cancel the Auto Off function” on .
Page 11
Always have
the tip slanted
Do not bend Do not put the
hose tip into
the water
10cm
or more
To stop continuous drainage
and restore the original position
Take the hose off from drain outlet and put
the rubber cap on.
Take out the water tank
and take off the rubber
cap on the back side
Drain stopper
Continuous
drainage hole
While pressing the drain stopper
with your right finger, run the
hose through the continuous
drainage hole on the back of the
main unit and securely insert
into drain outlet
Press with your
right finger
Insert with your left hand
Commercial hose inner
diameter 15mm (outer
diameter up to 21mm)
Do not use an old
hose with wide
opening.
(Otherwise, water
may leak.)
Make sure the hose is inserted
all the way in.
Set the water tank
to the main unit

18
Filter
Filter
Tab (4 places)
IMPORTANT NOTICES DURING CLEANING
FILTER/SENSOR
Once every two weeks
●
●
NOTE
●
For heavy dust
1
Hole in main unit
Filter tab
Do not use the following. (Otherwise, the surface may be damaged or cracked.)
Vacuum cleaner
Filter
Sensor
CARE AND
MAINTENANCE
We recommend
periodical cleaning for
a long, clean and
sanitary use!
Please use the specified
cleaners
Thinner
Benzine
Alcohol
Oven cleaner
Cleanser
Bleach
Housing and furniture
Synthetic detergent
(Alkaline)
Spray cleanser
Steel wool
Benzine
Thinner
Bleach
Spraying detergent
Lapping powder
Abluent
Synthetic detergent
Ablu
uen
Remove the dust
with vacuum cleaner
Take off the filter cover Take the filter off
from the cover
Wash off the dust from the
net and dry it
(Remove gently with a small brush)
Filter
cover
Use mild detergent
(dishwashing soap) in
lukewarm water for
heavier dusts.
Attach the filter to the cover Reattach to the original place
(Securely place the 4
filter tabs)
Attach the filter with
mark upwards.
Clogged filter may cause reduced dehumidification or consume more electricity.
Dust will accumulate inside the main unit without the filter which may cause malfunctions.
19
CARE AND MAINTENANCE
1
2
4
3
●
●
WATER TANK Once a week
NOTE
●
●
●
●
WARNING
[Otherwise, electric shock or injury may be caused]
Tank lid
Check float
If float comes off
Pin
Magnet
Float
Tank lid
( (
Drain outlet
Always turn the operation “OFF” and
unplug the power plug.
Dispose water
and take the
tank lid off
Remove the lid slowly from the
corner.
Wash the
inside of the
tank
Wash the tank with dishwashing
sponge.
Use mild detergent (dishwashing
soap) with lukewarm water if
necessary.
Dry the tank
with soft cloth
Check to see if the float is
securely attached.
Check the direction of float, and then
insert the float.
Magnet: Facing up
Facing outside of tank
Insert pin and
secure.
Put the tank
lid on
Be sure to tightly close the tank
lid. (To prevent water leakage)
Be careful not to damage the float.

20
AUTO
ECO DEODORIZE
QUICK CONTINUOUS
●
●
Drain outlet
(Continued)
MAIN UNIT
WHEN NOT USING FOR A LONG PERIOD OF TIME
Once a month
1
1
2
3
4
NOTE
●
●
●
●
Internal drying
●
●
Plastic bag
Dispose water
Page 19
Beep
Vacuum cleaner
Filter
CARE AND
MAINTENANCE
We recommend
periodical cleaning
for a long, clean and
sanitary use!
Soak a soft cloth in
lukewarm water
(40°C or lower) or
mild detergent to
wipe dirt off
Wipe off any excessive detergent
with a damp cloth thoroughly.
Do not forget to clean air inlet,
air outlet, and casters as well.
Poor insulation or rust may occur if the main unit gets wet.
When using chemical agent, please follow the direction for use.
Conduct internal
drying operation
(Laundry
deodorizing mode)
Sometimes there are moistures on
the cooler inside the main unit.
Run the laundry deodorizing
operation (air flow mode) for
about 2 hours.
(Using the OFF TIMER is useful)
This will dry the inside of main
unit and prevents mold from
forming.
Clean the filter
Page 18
Take the tank lid off and wipe off
any water on the tank.
Store in a dry
place with no
direct sunlight
Put in the original box or place
a cover (plastic bag) over the
unit to prevent dust and store.
If dust get in, the main unit may
shoot out dust the next time it is
operated.
21
CARE AND MAINTENANCE / SPECIFICATIONS
Power Supply
Model
Dehumidifying Capacity
Power Consumption
Water Tank Capacity
Length of Power Cord
Dimensions
Weight
●
●
SPECIFICATIONS
Dehumidification Area
DW-D20A
220V-240V/50Hz
20L/day
12.5L/day
270W
0.45W
25-50m2
Approx. 4.2L
Approx. 1.8m
374mm(W)×250mm(D)×620mm(H)
About 15kg
30°C/80%RH
26.7°C/60%RH
26.7°C/60%RH
Standby Status
Dehumidifying Capacity: the amount of humidity that a dehumidifier removes from the air in a
day when room temperature and relative humidity are kept at 30°C/80%RH and 26.7°C/60%RH
respectively.
Power Consumption: the consumption value when fan speed reaches the highest.
Dehumidifying Area: according to standards of JEMA.
Standby Status: the power plug is pluged in the socket while the Power ON/Off button is set
at "Off".
●

22
11
The room may be too big.
The opening/closing of windows and doors may be too frequent.
Check to see if anything that release steam is in use such as an oil heater.
The room becomes hot
Problem Solution Reference
Page
10
10
TROUBLESHOOTING
18
17
12
Check to see if the air outlet or air inlet is blocked.
The water leaks Make sure you do not tilt, knock over or drop the main unit.
Use the unit at a level, stable place with free of vibration.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Please check one
more time before
calling for services.
During operation
Warm air will come out from the air outlet during
(ECO/QUICK/CONTINUOUS) laundry drying operation and dehu-
midifying operation, and if used in an enclosed room, the room
temperature will go up.
The unit does not
dehumidify
Dehumidification
amount is low
(Water does not
accumulate in the tank)
The dehumidification level varies with the size, structure, temperature
and humidity level of the room.
When room temperature or humidity level is low, the dehumidification
level will be low in general.
●
Low humidity of less than 50% cannot be maintained.
Air flow mode will operate during auto dehumidifying operation when
room temperature or humidity level is low, and the unit will not
dehumidify.
When the room temperature is below 3°C, air flow mode will
operate to prevent the water tank’s water from freezing, and the
unit will not dehumidify.
When the room temperature is higher than 38°C, the protective device
will activate, the air flow mode will operate, and the unit will not
dehumidify.
When the room temperature is 15°C or under, the unit automati-
cally defrosts by switching to air flow mode which makes water
harder to collect.
Check to see if the unit runs in laundry deodorizing operation.
Switch to (ECO/QUICK/CONTINUOUS) laundry drying and
dehumidifying operation.
Check to see if the filter is clean.
If dirty, clean the filter.
Remove whatever blocks the port.
Check to see if the hose is disconnected from the drain outlet of the
main unit during continuous drainage.
Install the hose by pushing it all the way in.
The humidity level does
not go down
Laundry does not dry
Check to see if AUTO mode (QUICK/ECO laundry drying) is operating.
The AUTO operation will stop automatically after a maximum of
3 hours.
Laundry may not be dried enough depending on the room situation.
Operate AUTO mode again or switch to the CONTINUOUS laundry
drying operation.
23
TROUBLESHOOTING
10,16
11
16
16
14
19
Solution
Problem
The operation stops
Check to see if the water tank is properly placed.
If not, place the water tank correctly.
Check to see if the water tank is full.
If the tank is full, drain the water.
Check to see if the float is properly placed.
If not, place the float properly.
The unit may malfunction.
The operation has stopped with the Auto Off function.
Check the power plug.
If not inserted, insert the power plug into an outlet.
Check to see if there is a power outage.
If there is a power outage, wait until the power is resumed.
12
Long beep
Beep
Beep
The unit cannot operate
Buttons do not work
Check the CHILD LOCK setting.
If locked, release the child lock.
12
3
3
3
10
18
Use the unit at a level, stable place with free of vibration.
Check to see if the filter is clogged.
Clean the filter.
The sound is too loud
Buzzing sound…This is the operating sound of the compressor.
Reference
Page
Sound
There is a sound at the start
of operation/during
operation/when the unit stops
The unit will sound loudly for the first few seconds upon power-on when
the room temperature is low. (This duration will vary with the temperature.)
Whipping, howling sound… This is the sound of refrigerant
(coolant) circulation.
Check to see if the dehumidifier is properly placed on the floor or if
the floor is unstable.
The unit does not operate
The tank FULL indicator
light is blinking
The OFF TIMER “6h”
indicator light is blinking Press the STOP button to stop the indicator light from blinking,
and start the operation again.
When using continuously, disable the Auto Off function.
The tank FULL indicator
light and the OFF TIMER
“6h” indicator light are
blinking
The water tank became full and the operation has stopped with the
Auto Off function.
Empty the water tank, press the STOP button to stop the
indicator light from blinking, and start the operation again.
The QUICK indicator
light is blinking
Long beep
Long beep
Long beep
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
QUICK (AUTO) laundry drying operation has completed and the
operation has stopped.
Press the STOP button to stop the indicator light from blinking,
and start the operation again.
The ECO indicator light
is blinking
Press the STOP button to stop the indicator light from blinking, and
start the operation again.
ECO (AUTO) laundry drying has completed and the operation has
stopped.
Please consult the store where you purchased the product or
SHARP authorized service center.
Other indicator lights
blinking

目錄 頁數
2
3
4
6
8
10
12
10
11
11
12
12
13
13
13
16
17
18
18
16
19
20
●
●除濕模式
●停止
●搖擺送風
●兒童安全鎖
●定時關機
●PCI開/關
●關閉提示音
抽濕機
使用說明書
操作方法
方便的功能
排水方法
●過濾網、感測器
●儲水箱
●主機
●長時間不使用時
保養
規格
故障時的檢查事項
＊
●儲水箱
●連續排水
14
14
15
High-Density 7000 ＊
本技術所採用的數字是根據把抽濕機放在牆角，在衣物除臭模
式下，將上下擺風設定為“DOWN”、左右擺風設定為
“OFF”時，在房間(溫度 20℃，濕度 50%)的中央附近(距離地
面1.2 米)測出的每立方厘米空氣中Plasmacluster Ion的估計值。
此標誌及 Plasmacluster 都是SHARP
株式會社的註冊商標。
感謝您購買SHARP抽濕機。
請仔細閱讀本使用說明書，以便正確地使用本產品。
在使用之前，請務必仔細閱讀“安全注意事項”。
請妥善保存此說明書以便日後翻閱。
乾衣除濕、衣物除臭模式
介紹如何使用
保養必要時
型號
DW-D20A
特 點
常見問題
安全注意事項
各部分名稱
使用前

特 點
2
快速乾衣
乾衣除濕模式
大型儲水箱
節能乾衣
乾衣除濕模式
輕鬆除濕
自動除濕模式
＊
＊
160°
90°
透過高濃度PCI及強力除濕功能，使室內晾曬
的衣物迅速除臭及乾爽
High-Density 7000 ＊
將風量調至最大，迅速乾
衣後，將自動停止。
綜合除濕和送風功能，有
效使室內晾曬的衣物迅速
乾爽，然後自動停止。
保持一定的濕度，為房間
營造一個舒適的環境。
上下 160° 左右 90°
自動搖擺送風
＊
通過廣闊的搖擺角度，進
行大範圍除濕。
上下搖擺設定為“WIDE”、左右搖擺設置為
“ON”時的送風範圍，會根據搖擺角度的不同
而存在差異。
擁有 4.2L 儲水箱及連續排
水功能，可充分滿足除濕
需求。
本技術所採用的數字是根據把抽濕機放在牆角，在衣物除臭模式下，將上下擺風設定為“DOWN”、左右擺風設定為“OFF”時，在房間(溫
度 20℃，濕度 50%)的中央附近(距離地面 1.2 米)測出的每立方厘米空氣中Plasmacluster Ion的估計值。
風速無故變強？
即使設定了除濕(自動、弱)模式，在以下情況下，風速會自動增加。
●
●
常見問題
由於前面的出風口會吹出暖風，因此如在密閉的房間內操作時，
會導致房間溫度上升。
房間會不會變暖？
■此外，詳細情形請參考“故障時的檢查事項”。
聲音很大？
儲水箱無水分積存，是否沒有進行除濕？
3
目前濕度顯示不正確？
可採用市面銷售的排水管(內徑 15mm)進行連續排水。
連續啟動除濕模式，可連續排水嗎？
特點
/
常見問題
第9、15 頁
在高溫或溫度、濕度都比較低的時候，將自動轉為送風模式，而不進行除濕，因此儲水
箱中無水分積存。 第20 頁
開始操作、停止操作時聽到聲音。
壓縮機操作的聲音以及製冷劑循環發出的聲音。 第21 頁
目前濕度顯示為大致濕度。(未必一定與其他設備顯示相同的數值)
此外，開始進行乾衣除濕時，濕度有機會產生巨大變化，可能與實際濕度產生差異。
濕度低於 31% 時顯示為“LO”，高於 91% 時則顯示為“HI”。
室溫在約 38℃ 以上時 …… 為使主機內部溫度下降(只送風)
室溫在約 15℃ 以下時 …… 為預防主機內部結霜(只送風)
第20、21 頁

安全注意事項
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
警告
注意
警告 為預防火災、觸電、受傷
電源插頭及電源線
發生異常情況時(有燒焦異味等)
使用時
4
■
表示不允許做的
禁止事項。
表示必須要做的
強制事項。
■
為預防對用戶或他人導致危害及
財產損失，特對應遵守的事項說
明如下。
若不遵守以下之安全事項
或錯誤操作本機，則可能
發生不同程度的危險：
表示有可能會導致死亡或
重傷。
表示有可能會導致受傷或
財物損失。
請根據以下標記，遵守其
表示的事項：
請勿使電源線破損
請勿對電源線進行任意更換、加工、強制彎曲、拉扯、扭曲、捆紮等
請勿對其承載重物或夾壓
移動時，請勿使腳輪輾壓電源插頭及電源線
(否則可能會導致電源線破損、火災、觸電)
請勿用潮濕的手插拔電源線(否則可能會導致觸電)
電源線應避免中途連接、使用延長線，還應避免與其他電器用品共
同使用一個插座(否則可能會導致觸電、發熱、火災)
不可使用額定電壓(220V 50Hz)以外的電源
請勿以直接插入或拔出電源插頭來代替正常的主機開關
(否則可能會導致觸電或火災)
確認電源插頭上沒有積塵及沒有鬆動後，將其牢固地插入電源插座，
及應定期用乾布擦拭電源插頭上的灰塵
(積塵或接觸不良可能會導致觸電或火災)
若要更換電源線，請聯絡聲寶維修服務中心
請勿將手指或異物(針狀物、金屬絲、棒狀物)插入吹出口或吸入口
(由於風扇在機內部高速運行，一旦接觸可能會導致受傷，接觸內部
還可能會導致觸電、故障)
不可作任何改裝。禁止非維修技術人員進行分拆、改造或維修
(否則可能會導致火災、觸電、受傷)
請勿將噴霧器等罐子放在主機的附近。另外，請勿在主機附近使用
易燃的危險物品(汽油、稀釋劑)
(否則可能會導致火災、爆炸或火災)
請勿長時間被風直接吹著身體
(否則可能會導致身體不適、健康受損)
請勿把主機放在發熱器具的附近
(主機的樹脂部分熔化，可能會導致火災)
請立即停止操作，拔出電源插頭，並與聲寶維修服務中心聯絡
(否則可能會導致觸電或火災等)
需要維修時，請與聲寶維修服務中心聯繫
(如維修不妥善，可能會導致觸電、火災、受傷)
保養時
●須停止操作，拔出電源插頭
(由於內部風扇正在高速運行，可能會導致受傷)
注意 ●
與後方距離
大於 20 厘米
與上方距離大於 50 厘米
與前方距離大於 50 厘米
與左右距離
大於 20 厘米
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
注 意 為預防漏電、受傷或財物損失
請務必遵守
電源插頭及電源線
使用時
5
安全注意事項
●
須緊握電源插頭拔出
(否則可能會導致火災、觸電、短路)
長時間不使用時，為安全起見，須將電源插頭從插
座中拔出
(否則可能會導致觸電、漏電、火災)
請勿使主機翻倒或從高處墮下
請勿在主機翻側時收藏或移動本機
(否則可能會導致容器破損、漏水、漏電等故障)
請勿在牆壁或家具間的狹窄空間使用本機
請勿在出風口或過濾網上覆蓋布等物品
(通風不暢可能會導致發熱、起火)
請勿在易於被水濺濕的地方或浴室等使用本機
請勿用水直接清洗本機
請勿在主機上放置花瓶等含水的容器
僅限室內使用。請勿放置在被陽光直射或有風雨
的地方使用
請勿放置在可能洩漏燃油或易燃氣體的地方
(否則可能會導致觸電、過熱、漏電、火災)
請勿放置在桌上等高處使用
(主機墮下時，可能會導致受傷)
請勿在產品上擺放或倚靠物品
(主機移動或翻倒時，可能會導致受傷)
請勿飲用除濕水或將除濕水用於動物飼養等
(否則可能會影響健康)
請勿將燃燒器具放置在出風口或風能到達的地方
(否則可能會導致燃燒器具不完全燃燒)
請勿用於保存美術品、學術資料或其他特別用途
(否則可能會降低保存品品質)
請勿在有人的房間長時間使用本機
啟動“衣物(快速、節能、連續)”模式或除濕模式
時，產生的熱量會使房間溫度上升，使房間變得乾
燥，可能會影響健康
下列人士使用本機時，請加以注意
(嬰幼兒、兒童、老人、無法自己操作本機的人士)
請在主機周圍預留一定的空間
(通風不暢可能會導致過熱、起火、故障、保護裝
置啟動)
兒童應受到適當監管以確保不會以此機器作玩具
請勿在榻榻米、易損傷的地板、高低不平的地方、
長毛地毯等處拖動腳輪來改變主機的方向
(否則可能會導致地板及地毯表面受損)
移動時，須停止操作，並把儲水箱中的水倒掉
在平坦及穩定的地方使用
連續排水時，避免水管彎折，使水管順利排水
使用排水管時，須確保周圍的溫度不低於零度
(儲水箱的水流向室內並弄濕家具等，可能會導致觸
電、漏電、火災)
長時間在同一地方使用時，須注意本機下方及地板
周圍等出現的污垢
如對電視機、收音機產生干擾或電波手錶無法正確顯示時間時，請儘量遠離。
(否則可能會導致電磁波干擾)
除非得到監護人或負責其安全人士的適當監督或
指導，否則，此機器不適合身體官能或心智能力
退化者，或缺乏操作經驗和知識的人士(包括兒
童)使用

導風板(吹出口)
腳輪(4 個)
水位窗
位於手柄
內側。
儲水箱拉槽
儲水箱手柄
浮子
正面
感測器(溫/濕度感測器)
儲水箱
各部分名稱
目前濕度顯示(綠)
顯示目前濕度。
操作面板
PCI開/關鍵
PCI指示燈(藍)
點亮……PCI釋放中
PCI釋放模式設定為“ON”(開)或“OFF”(關)。
6
兒童安全鎖鍵
“開啟”或“解除”兒童安全鎖功能。
兒童安全鎖指示燈(綠)
點亮……兒童安全鎖處於開啟狀態
31% 或以下
…………
…
…………
以1% 為單位顯示目前濕度
91% 或以上
定時關機鍵
“2h”點亮……關機定時器設定為 2 小時
“4h”點亮……關機定時器設定為 4 小時
“6h”點亮……關機定時器設定為 6 小時
“6h”閃爍……
因自動關機功能而停止操作
設定自動關閉主機的時間。
定時關機指示燈(綠)
儲水箱蓋
第13 頁
第12 頁
第13 頁
第9 頁
第12 頁
第14、17 頁
請勿取出聚苯乙烯泡沫
材料。(否則無法檢測到
儲水箱已滿)
電源線
連續排水孔
(塞頭)
電源插頭
手柄(左右兩側)
背面
過濾網
過濾網網罩
過濾網(吸入口)
7
各部分名稱
按下帶有 ★ 標記的
按鍵則開始運行。
第9 頁
停止鍵
停止操作。
左右搖擺鍵
左右搖擺指示燈(綠)
左右搖擺功能設定為“開”或“關”。
點亮……自動左右搖擺
乾衣除濕切換指示燈(綠)
乾衣除濕鍵★
顯示運行狀態。
切換到乾衣除濕模式。
上下搖擺鍵
上下搖擺指示燈(綠)
切換到不同的上下搖擺模式。
顯示搖擺狀態。
水滿指示燈(紅)
閃爍……儲水箱已滿
除濕切換指示燈(綠)
除濕鍵★
顯示運行狀態。
切換到除濕模式。
第14 頁
第11 頁
第11 頁
第10 頁
第12 頁
第12 頁
HIGH (高)
LOW (低)
AUTO (自動)
DEODORIZE
CONTINUOUS
ECO
QUICK
Light off Off
UP
DOWN
WIDE
主機和操作面板
( 除臭 )
(
連續 )
(
節能 )
(
快速 )
(關)
(上)
(下)
(廣闊)

與左右距離
大於 20 厘米
與後方距離
大於 20 厘米
與前方距離
大於 50 厘米
與上方距離
大於 50 厘米
8
包裝材料
●
海邊、鹽份較多的地方
●
溫泉等硫化氣體較多的地方
●
機械油較多的地方
●
水蒸氣或油煙較多的地方
請勿在下列地方使用
儲水箱中可能殘留水分，這是在工廠進行產品檢查時所留下的，並非異常。
●
＊
請勿在除濕機附近使用氟化乙烯樹脂或含矽酮配方的化妝品等
從包裝箱中取出主機
電源為 220V
請在約3˚C~38˚C的房間內使用
使用前
初次使用時
安裝位置要求
●
●
●
導風板將自動閉上。
1
2
●
否則，可能導致機殼脫色、變形或錯誤
啟動安全裝置。
●
若放置在長毛地毯或坐墊上，
可能會導致翻倒。
避免陽光直射
放置在穩定及平坦的地方
請務必緊握手柄，從包裝箱中取
出。
包裝箱與包裝材料可用於存放產
品，請妥善保存。
放置在平坦穩固的
地方，將電源插頭
插入插座
當對電視機、收音機等接收造成干
擾、或電波手錶無法正常顯示時間
時，請盡可能遠離這些電器。
●
室溫低於3℃或高於38℃時，壓縮機
的運行將停止，不再運行除濕模式。
(進入低溫/高溫保護狀態，從而轉為
送風模式)
＊
如主機內部附著氟化乙烯樹脂或矽酮，可能導致無法釋放PCI。
護髮產品(護髮素、頭髮定型噴霧、頭髮護理液等)、化妝品、止汗產品、
防靜電產品、防水噴霧、上光劑、玻璃清潔劑、化學抹布、蠟製品等。
請予以瞭解的事項
緊握手柄移動
●
●
移動時
手柄(左右兩側)
●
●
室溫低於約 15℃時，由於主機內部可能會結霜，設備將自動進行除霜。
內部除霜
再次啟動時，除濕功能會在 3 分鐘後開始
自動關機功能
經過 12 小時 運行停止運行開始
【否則可能會導致地板及地毯表面受損】
注 意
1
2
●
●
插入電源插頭後，自動關機功能立即啟動。
運行停止時
同時按住 3 秒
5 秒鐘
點亮
9
腳輪
嗶
解除自動關機功能(希望連續排水時)
使用前
在榻榻米、易損傷的地板、高低不平的地方及長毛地
毯等移動時，須將主機抬起
停止操作，並排
出儲水箱中的水
請收好電源線，緊握手柄移動。
拖曳可能會導致電源線損壞。
約45 分鐘一次(運行約 12 分鐘左右)，在壓縮機停止運作、風量設定為“HIGH”(高)的狀態下運行。
在房間溫度較低的時候，除霜的時間較長。
除霜時，因壓縮機停止運作，不進行除濕，所以儲水箱的積水量會減少。
為預防忘記關機，主機運行
12 小時後將自動停止運行。
(定時關指示燈“6h”將會閃爍)
再次啟動時，請按“STOP”(停止)鍵
解除指示燈閃爍，使抽濕機繼續運作。
同時按“OFF TIMER”(定時關機)
鍵和“STOP”(停止)鍵3 秒以上，
在聽到“嗶”聲後，自動關機功能
將會解除。
拔出電源插頭後，自動關機功能再
次啟動。
若要重做此功能，重複以上步驟，
聽到“嗶嗶”兩聲後，功能會重新啟
動。
在插入電源插頭或衣物(快速、節能、連續)模式及除濕模式停
止後，為保護設備，壓縮機將停止操作約 3 分鐘。此時，主機
只會進行送風模式，並不會進行除濕。
執行送風運行模
式約 3 分鐘
FULL
●

●
●
●
操作方法
注意
乾衣除濕、衣物除臭模式
希望快速乾衣時
希望減少電力消耗時
希望連續乾衣時
希望為衣物除臭時(送風模式運行)
1
2
在風量“最強”的狀態下乾衣。(乾衣除濕)
快速自動(自動停止)
節能自動(自動停止)
將風量設置為“最強”連續乾衣。(乾衣除濕)
連 續
在風量“最強”的狀態下，執行衣物除臭(送風)模式。
除 臭
選擇喜歡的
操作模式
●
●
●
10
嗶
自動運行
插入電源插頭後，將立即啟動“QUICK”
(快速)模式。
如不拔出電源插頭，將延續上一次運行模式。
嗶嗶
嗶
嗶
嗶
●操作開始約 30 分鐘後，濕度低於 55% 或操作時間達到約 3 小時，將自動停止操作。
(聽到“嗶…”的一聲後，操作停止，快速指示燈閃爍)
●操作開始約 30 分鐘後，濕度低於 60% 或操作時間達到約 3 小時，將自動停止操作。
(聽到“嗶…”的一聲後，操作停止，節能指示燈閃爍)
●如PCI釋放設定為“OFF”，切換至此模式時，PCI將自動開啟。
(無法將PCI釋放設定為“OFF”。)
選擇搖擺
送風模式 第12 頁
請將出風口吹出的
風直接對準衣物。
出風口與衣物的距離
須保持10厘米以上
請拉平脫水後衣物產生的皺褶，並放在通風處晾乾。
請將質地較厚的衣物放在通風情況良好的地方晾乾。
在室溫低、房間大、衣物較多時，乾衣時間會延長。
在自動運行“QUICK”(快速)、“ECO”(節能)模式下，可能在衣物未乾時停止操作，此時並非故障，請
再次啟動自動操作模式。
DEODORIZE
CONTINUOUS
ECO
QUICK
除濕模式
希望自動除濕時
自動
連續以“LOW”風量運行，進行靜音除濕。
＊有時風量會根據室溫增大。
弱
連續以“HIGH”風量運行，進行除濕。
強
●
●
1
2
選擇喜歡的
操作模式
選擇搖擺送風模式
嗶
嗶…
房間溫度 合適濕度
3∼26℃
26∼38℃
60％
55％
注 意
勿在出風口覆蓋衣物等物品
【否則可能會導致過熱、著火、故障】
●
●
停 止
1
11
嗶
嗶
嗶嗶
操作方法
插入電源插頭後，將立即操作“AUTO”(自動)
模式。
如不拔出電源插頭，將延續上一次操作模式。
溫/濕度感測器將根據房間溫度調節除濕量，
以達到合適濕度。
房間溫度過低或過高時，可能無法調節到合適
濕度。 第20 頁
第3 頁
第12 頁
指示燈熄滅，搖擺送風自動關閉。
長時間不使用時，請啟動內部除濕
(衣物除臭)模式。 第18 頁
HIGH
AUTO
LOW
在風量“強”的狀態下，交替執行除濕模式(壓縮機運行)和送風模式(壓縮機停止)來
乾衣除濕。

●
方便的功能
運行時
定時關機
選擇希望關機的時間 ●
●
●
●
1
“解除”“開啟”
兒童安全鎖
避免兒童觸碰或錯誤按下操作鍵。
1
“OFF”“ON”
運行時
PCI開/關
每按一次，切換PCI開/關操作設定。
●
嗶嗶嗶
嗶
嗶
嗶嗶
●
運行停止時
注意 ●
關閉提示音 (滿水時/到達定時關機時間/關機功能結束時)
●
聽到“嗶”的一聲後完成設定。
在晚上休息，或想取消“提示音”時，請使用本功能。
1
同時按住 3 秒
●
請在希望停止的位置按鍵，指示燈將熄滅。
搖擺“關”
搖擺送風
正在運行
搖擺“開”
正在運行
12 13
嗶嗶嗶
嗶
嗶
嗶
嗶嗶
下
上
“WIDE”交替執行“UP”、“DOWN”。
熄滅(取消)
嗶
嗶
嗶
嗶嗶
熄滅(停止)
●
請勿用手強行撥動導風板。
否則可能會導致故障。
搖擺角度： 約160°
(送風範圍： 約180°)
開啟
\
解除
開啟後，只能進行以下操作。
運行時…停止操作及解除兒童安全鎖。
停止時…解除兒童安全鎖。
拔出電源插頭後，兒童安全鎖將被解除。
方便的功能
達到設定時間時，在發出“嗶…”
的一聲通知音後，停止操作。
定時關機指示燈的顯示會隨運行時
間發生變化。
在設定定時關機後，儲水箱如達到
滿水狀態時，操作將停止，但定時
關機時間的倒數繼續執行。(排水後
可以繼續使用)
希望解除定時關機時，請按定時關
機鍵，定時關機指示燈將會熄滅。
即使將PCI設定為“OFF”，在衣物
除臭模式下，將自動啟動PCI功能。
再次同時按上下搖擺鍵和停止鍵 3 秒
以上，在聽到“嗶嗶”兩聲後，啟
動提示音功能。
拔出電源插頭後，設定被解除，提示音響起。
6h
4h
2h
UP
DOWN
WIDE
左
右
上
下

連續排水
3
4
請從排水口取下水管，並裝上塞頭。
＊
＊
左手協助插入
●
●
●
●
運行連續排水模式時的注意事項
10厘米
以上
水管的拔出方法
取出儲水箱，拔出
背面的塞頭
2
拔出電源插頭
在主機上安裝儲水箱
1
塞頭
儲水箱
儲水箱拉槽
停止連續排水，還原成初始狀態時
水管
利用右手手指按壓
連續排水孔
排水口
排水塞
排水方法
附近如有排水地方，
可進行連續排水。
本抽濕機為家用型抽濕機。運行連續排水模式時，請定
期(每兩週一次)檢測過濾網是否有污垢、排水軟管是否
堵塞，確保無異常狀況。
請將排水管放置在水管四周不低於零度的地方。
(水管中的水發生凍結後，導致主機中的水流向室內並弄
濕家具等)
水管的前端容易爬入蟲子，建議安裝網罩。
運行連續排水模式時，在運行 12 小時後，將啟動自動關
機功能，令主機自動停止。關於自動關機功能的解除，
請參考“自動關機功能的解除方法 ”。
第9 頁
勿從中間彎
曲水管
前端須向下
傾斜
勿使水管前端接
觸水
利用右手手指按住排水塞，並通
過左手從主機背面的連續排水孔
放入水管，再牢牢插入主機的排
水口
市場上銷售的水管內徑
15 毫米(外徑不超過 21 毫米)
請確認水管是否已插入深處。
請勿使用管口已經
擴張的舊水管。
(否則可能會導致
漏水)
15
儲水箱
排水方法
取出儲水箱
排水
裝回儲水箱
儲水箱拉槽
儲水箱
排水口
●
●
●
●
注意
閃爍
●
●
1
2
3
●
●
14
儲水箱為滿水狀態時(約4.2L)，
將自動停止運作(滿水停止裝置)，水滿指示燈將會閃爍。
運行衣物除臭功能時，在儲水箱滿水狀態下仍能操作。此時，
“水滿指示燈”(紅)會熄滅。
排水後，將儲水箱重新裝入主機，“水滿指示燈”(紅)將會熄滅，
主機將再次運行。
嗶
嗶…
請穩住主機的同時，直接抽取。
請在抽取時保持平穩以防水溢出
來，同時，為預防傾斜或掉落請
小心移動。
牢牢插入。
勿粗暴安裝。
(否則可能會導致故障)
移動主機時，務必停止操作，進行排水。
(否則可能會導致儲水箱內的水因移動時的震動而溢出，濺濕家具或地板等)
請定期清掃儲水箱內壁。(約每週清掃一次)
(長期不清掃可能會產生黴菌、雜菌滋生，發出惡臭)
FULL