Sharp DV-S1X User manual

Please read this Operation Manual carefully
before using your DVD Video Player.
DVD Video Player
MODEL
DV-S1X
OPERATION MANUAL
4NTSC/PAL
The region number for this DVD player is 4.
E56B5AD.QX3 02.8.24 11:18 AM Page 1

–2–EN
Power Cord Protection
To avoid any malfunctions of the Player, and to protect
against electric shock, fire or personal injury, please observe
the following.
• Hold the plug firmly when connecting or disconnecting the
AC power cord.
• Keep the AC power cord away from heating appliances.
• Never put any heavy object on the AC power cord.
• Do not attempt to repair or reconstruct the AC power cord
in any way.
SAFETY INFORMATION
Note:
This Player can be used only where the power supply is
AC 220V-240V, 50/60Hz. It cannot be used elsewhere.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS PLAYER IS
HARMFUL TO THE EYES, DO NOT ATTEMPT TO
DISASSEMBLE THE CABINET. REFER SERVIC-
ING TO QUALIFIED PERSONNEL ONLY.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
VIDEO RL C B
C R Y
AUDIO OUT
S-VIDEO
VIDEO OUT
COMPONENT
COAXIAL
OPTICAL
DIGITAL
CAUTION - VISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCK DEFEATED.
AVOID EXPOSURE TO BEAM.
• This Player is classified as a CLASS 1 LASER product.
• The CLASS 1 LASER PRODUCT label is located on the
rear cover.
• This product contains a low power laser device. To ensure
continued safety do not remove any cover or attempt to
gain access to the inside of the product. Refer all servic-
ing to qualified personnel.
Laser Diode Properties
Material: GaAs
Wave length: DVD 650 nm / CD 780 nm
Emission Duration: Continuous
Laser output: Max. 0.8 mW
E56B5AD.QX3 02.8.24 11:18 AM Page 2

–3–EN
Location and Handling
• Do not place your Player in enclosed spaces or do not
cover it to prevent excessive temperatures inside the
Player.
• Do not place the Player in direct sunlight, or near heat
sources.
• Keep the Player away from strong magnetic objects.
• Do not place any object containing water or other liquids
on the Player. In the event that liquid should enter the
cabinet, unplug the Player immediately and contact the
retailer or service centre approved by SHARP immediate-
ly.
• Do not remove the Player cabinet. Touching parts inside
the cabinet could result in electric shock and/ or damage
to the Player. For service and adjustment inside the cabi-
net, call a qualified dealer or service centre approved by
SHARP.
Nonuse Periods
When the Player is not being used, switch the Player to the
Standby mode.
When left unused for a long period of time, the Player should
be unplugged from the household AC outlet.
No Fingers or Other Objects Inside
Do not put any foreign object on the disc tray.
Stacking
Place the Player in a horizontal position, and do not place
anything heavy on it.
Condensation
Moisture may form on the pickup lens in the following condi-
tions:
• immediately after a heater has been turned on.
• in a steamy or very humid room.
• when the Player is suddenly moved from a cold environ-
ment to a warm one.
If moisture forms inside this Player, it may not operate prop-
erly.
In this case, turn on the power and wait about one hour for
the moisture to evaporate.
Cleaning
Unplug your Player before cleaning. Use a damp cloth for
cleaning. Do not use cleaning fluids or aerosols which could
enter the Player and cause damage, fire, or electrical shock.
These substances may also deteriorate the finish of your
Player.
If there is Noise Interference on the TV While a
Broadcast is being Received
Depending on the reception condition of the TV, interference
may appear on the TV monitor while you watch a TV broad-
cast and the Player is left on. This is not a malfunction of the
Player or the TV. To watch a TV broadcast, turn off the
Player.
SAFETY INFORMATION
Recommended Measures for Optimum Picture
Excellence
The Player is a precision device that is constructed using
extremely accurate technology.
Soiling or friction affecting the pickup lens or disc drive can
impair the image quality. At the worst, neither video nor audio
will be played back. To obtain optimum picture quality, the
Player should be checked (cleaning and replacement of
some parts) every 1,000 hours. Note that this period varies
depending on the environment (temperature, humidity, dust,
etc.) in which the Player is used. Contact your authorized
Sharp supplier for details.
Apparatus Claims of U.S.Patent Nos. 4,631,603,
4,577,216, 4,819,098 and 4,907,093 licensed for limited
viewing uses only.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disas-
sembly is prohibited.
Do not attempt to clean the pickup lens yourself.
Service
Do not attempt to service this Player yourself. Please refer
any service to the nearest service centre approved by
SHARP.
Copyright
Copyright may exist in material you wish to record. Copying
such material without permission of the relevant licenses(s)
or owner(s) of the copyright is prohibited by law.
SHARP is not in a position to authorize the recording of
copyright works and nothing in this manual should be read or
implied as giving that authority.
Copy Protection
This Player supports Macrovision copy protection. On DVDs
that include a copy protection code, if the contents of the
DVD are copied using a VCR, the copy protection code pre-
vents the videotape copy from playing normally.
E56B5AD.QX3 02.8.24 11:18 AM Page 3

–4–EN
PRECAUTIONS
The following symbols appear below in some headings and
notes in this manual, with the following meanings!
:Description refers to playback of DVD video discs.
:Description refers to playback of audio CDs.
:Description refers to playback of MP3 discs.
MP3
CD
DVD
• Remote control
• Two R6 (AA) batteries
• Operation Manual
• VIDEO/AUDIO cable
SUPPLIED ACCESSORIES
SYMBOLS USED IN THIS MANUAL
For Customer Use:
Read carefully the information located at the bottom of your
DVD player and enter below the Serial No.Retain this infor-
mation for future reference.
Model No. DVD player
Serial No. __________________________
This DVD player conforms to the PAL colour system. Also
you can play discs recorded with the NTSC system via a PAL
system TV set.
•Some discs include region codes as shown below.
•The number inside the symbol refers to a region of the
world, and a disc encoded in a specific region format can
only be played back on DVD player with the same region
code.
4
PLAYABLE DISCS
E56B5AD.QX3 02.8.24 11:18 AM Page 4

–5–EN
TABLE OF CONTENTS
SAFETY INFORMATION ....................................2
PRECAUTIONS...................................................4
SUPPLIED ACCESSORIES.....................................4
SYMBOLS USED IN THIS MANUAL .......................4
PLAYABLE DISCS ....................................................4
FUNCTIONAL OVERVIEW .................................6
FRONT PANEL.........................................................6
REAR VIEW..............................................................6
Display Message ......................................................6
REMOTE CONTROL................................................7
Loading the Batteries ...............................................7
SETTING UP YOUR DVD PLAYER ....................8
Connecting to a TV or a stereo TV
that has COMPONENT VIDEO in jacks ...................8
Connecting a TV Equipped with S-VIDEO Input or
VIDEO/AUDIO Input Jacks .......................................9
Connecting to Audio Equipment...............................9
Playing 2 channel audio ......................................9
Playing Dolby Digital (5.1 channel), DTS or
MPEG audio ......................................................11
DVD OPERATION .............................................12
Basic Playback .......................................................12
General Features....................................................12
Disc menus.............................................................12
Title Menu...............................................................12
Pause .....................................................................12
Step by Step playback ...........................................13
Resume ..................................................................13
Fast Forward / Reverse Search..............................13
Slow Motion ............................................................13
Zoom ......................................................................13
Track .......................................................................13
Title/chapter............................................................14
Time Search ...........................................................14
Repeat ....................................................................14
REPEAT TITLE/CHAPTER................................14
REPEAT TRACK................................................14
REPEAT A-B......................................................14
Programme .............................................................14
Random Playback...................................................14
MP3 Playback.........................................................15
On Screen Information ...........................................15
Track Selection .......................................................15
Random Playback .................................................15
Programmed ...........................................................15
Audio Language .....................................................15
Stereo Sound Mode ...............................................15
Subtitle Language...................................................16
Camera Angle.........................................................16
Changing the On-Screen Display...........................16
Parental Control......................................................16
IF YOU FORGET THE PASSWORD .................16
Parental Level.........................................................17
Marker Setup Screen .............................................17
DVD SETUP ......................................................18
Audio Setting ..........................................................18
Black Level Setting .................................................18
Display Setting........................................................18
Language Setting ...................................................19
TROUBLESHOOTING ......................................20
SPECIFICATIONS .............................................21
MAINTENANCE ................................................21
E56B5AD.QX3 02.8.24 11:18 AM Page 5

VIDEO RL CB
CRY
S-VIDEO
VIDEO OUT
COMPONENT
COAXIAL
OPTICAL
AUDIO OUT
DIGITAL
10 1211 13 14 1615
REAR VIEW
Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
Display Message
–6– EN
PLAYPLAY STOP
STILL/STILL/PAUSEPAUSE
STANDBYSTANDBY
OPEN/CLOSE
SKIP
REV FWD
OPERATEOPERATE
2 43 5
1987 6
FRONT PANEL
1. OPERATE
to switch the player to ON or OFF
2. Disc tray
3. OPEN/CLOSE
to open/close the disc tray
4. PLAY
to start, pause or resume disc playback
5. STOP
to stop playback
6. FWD/SKIP
goes to next chapter or track during playback; press and
hold for three seconds for a forward search
7. SKIP/REV
goes to previous chapter or track during playback; press
and hold for three seconds for a reverse search
8. STILL/PAUSE
to pause the current disk operation
9. Display, Remote Sensor, STANDBY LED
FUNCTIONAL OVERVIEW
10. MAINS (AC Power Cord)
connect to a standard AC outlet
11. OPTICAL (Digital audio out)
connect to digital (optical) audio equipment
12. COAXIAL (Digital audio out)
connect to AUDIO inputs of a digital (coaxial) audio
equipment
13. AUDIO OUT (Left/Right)
connect to AUDIO inputs of an amplifier, receiver or
stereo system
14. VIDEO OUT
connect to the Video Input of a TV.
15. COMPONENT VIDEO OUT
connect to a TV with Component video in jacks.
16. S-VIDEO Out
connect to a TV with S-Video inputs
Caution: Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause permanent
damage to the unit.
E56B5AD.QX3 02.8.24 11:18 AM Page 6

–7–EN
1. ON SCREEN
to access or remove the display screen during DVD or
Audio CD playback
2. OPERATE
switch DVD player ON or OFF
3. AUDIO
to choose audio languages or sound modes
4. SUBTITLE
subtitle language DVD selector
5. ANGLE
select DVD camera angle
6. REPEAT
repeat chapter, track, title, disc
7. A-B REPEAT
repeat a specific segment
8. CLEAR
to reset the setting
9. STILL/PAUSE
pause playback temporarily / frame-by-frame playback
10. hh
to view DVD picture in fast reverse motion
11. PLAY
to start a DVD disc playback
12. SETUP
to access or remove the DVD setup menu
13. MODE
to set up programmed or random playback (Audio CD)
to set the black level during DVD playback
14.ZOOM
enlarge DVD video image
15. TITLE
to display title menu of a disc
16. ENTER
acknowledge menu selection
17. RETURN
to return previous or remove setup menu
18. Arrow(LKBs)
(left/right/up/down) select an item in the menu
19. MENU
to display the menu of the DVD disc
20. STOP
to stop a DVD disc playback
21. gg
to view DVD picture in fast forward motion
22. SKIP H,G
to skip chapter/tracks
23. 0-9 numerical key pad
select numbered items in a menu
+10
use this button to enter number 10 and above
24. OPEN/CLOSE
to open/close the disc tray
25. DIRECT SKIP
to locate a desired point
1. Open the battery compartment cover.
2. Insert two R6 (AA) batteries, with each one oriented
correctly.
3. Close the cover.
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Loading the Batteries
REMOTE CONTROL
RETURN
ZOOM
MODE
MENU
SKIPSTILL/PAUSEA-B
REPEAT
ANGLE
AUDIO
SUB TITLE
CLEAR
TITLE
STOP
PLAY
FWDREV
SETUP
ENTER
OPEN/
CLOSE
DIRECT SKIP
ON SCREEN
123
456
789
0+10
OPERATE
C
1
2
3
4
5
6
7
8
9
10
11
14
12
13
15
18
19
17
16
21
20
22
23
24
25
FUNCTIONAL OVERVIEW
E56B5AD.QX3 02.8.24 11:18 AM Page 7

–8–EN
SETTING UP YOUR DVD PLAYER
Connecting to a TV or a stereo TV that has COMPONENT VIDEO in jacks
CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programs.
CAUTION:
• Do not connect the Player to a VCR. If you view the
Picture on your TV after making the connections shown
on the right, a picture noise may appear. Connect the
Player to your TV directly.
DVD
Player
VCR
TV
TV
DVD Player
R
LYC
RCB
ANALOG INPUT VIDEO INPUT
COMPONENT
VIDEO RL CB
CRY
S-VIDEO
VIDEO OUT
COMPONENT
COAXIAL
OPTICAL
AUDIO OUT
DIGITAL
To ANALOG
AUDIO OUT jacks
To COMPONENT
VIDEO OUT jacks
To COMPONENT
VIDEO INPUT jacks
(Red) (White)
(Red)
(White)
To ANALOG
AUDIO INPUT jacks
AUDIO cable
(supplied)
COMPONENT cable
(commercially available)
E56B5AD.QX3 02.8.24 11:18 AM Page 8

–9–EN
SETTING UP YOUR DVD PLAYER
• When the Player is connected to a TV using both a VIDEO cable and an S-VIDEO cable, only the S-VIDEO connection is
enabled (the VIDEO connection is disabled).
• You will not be able to hear all of the sound being output by the Player if you use the VIDEO/AUDIO cable (supplied) to a
monaural TV that has only one AUDIO input jack.
NOTE:
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• Connect the Player directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection func-
tion will scramble the picture.
• If you want to listen to the audio through audio equipment, connect only the S-VIDEO or VIDEO cable to the TV.
Connecting a TV Equipped with S-VIDEO Input or VIDEO/AUDIO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector to the Player,
you should use an S-VIDEO cable (commercially available) to connect the TV to the Player.
Connecting the Player to audio equipment provides normal stereo sound plus powerful stereo sound enhanced by Dolby
Digital (5.1 channel), DTS, and MPEG Audio.
Connecting to Audio Equipment
CCAnalogue Connection
Playing 2 channel audio
TV (with external input jacks)
RL
AUDIO
INPUT
S-VIDEO
INPUT
VIDEO
INPUT
V IDEO/AUDIO cable
(supplied)
S-VIDEO cable
(commercially available)
DVD Player
VIDEO RL CB
CRY
S-VIDEO
VIDEO OUT
COMPONENT
COAXIAL
OPTICAL
AUDIO OUT
DIGITAL
To VIDEO/AUDIO
OUT jacks
To S-VIDEO
OUT jack
(Yellow)(Red)
(White)
(Yellow)
(Red)
(White)
To VIDEO/AUDIO
INPUT jacks
To S-VIDEO
INPUT jack
ANALOG INPUT
R
L
DVD Player
VIDEO RL CB
CRY
S-VIDEO
VIDEO OUT
COMPONENT
COAXIAL
OPTICAL
AUDIO OUT
DIGITAL
AUDIO cable
(supplied)
Amplifier of stereo system, etc.
To AUDIO
OUT jacks
(Red) (White)
(Red)
(White)
Jack and Plug Colours
To amplifier
audio input jacks
Audio Left: White
Audio Right: Red
E56B5AD.QX3 02.8.24 11:18 AM Page 9

–10 –EN
SETTING UP YOUR DVD PLAYER
CCDigital Connection
You can make this connection using either a coaxial digital cable or an optical digital cable.
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.
CCDigital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD
Play the disc as you normally would, with the audio mode set to “L+R”. With a digital connection, audio of a disc recorded
with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded in Dolby Digital (5.1 channel), Dolby Surround
(Pro Logic), DTS or MPEG Audio.
You should use an analogue connection to play Dolby Digital (5.1 channel) and MPEG Audio. (Dolby Surround (Pro Logic)
and DTS audio cannot be produced with an analogue connection).
Discs with linear PCM audio should play normally.
DVD Player
VIDEO RL CB
CRY
S-VIDEO
VIDEO OUT
COMPONENT
COAXIAL
OPTICAL
COAXIAL
OPTICAL
DIGITAL IN
AUDIO OUT
DIGITAL
Coaxial digital cable
(commercially available)
To optical digital
input jack
or
To OPTICAL
DIGITAL OUT
jack
Optical digital cable
(commercially
available)
To coaxial digital
input jack
To COAXIAL
DIGITAL OUT
jack
Audio equipment with
optical/coaxial digital input jack
E56B5AD.QX3 02.8.24 11:18 AM Page 10

–11 –EN
CCConnection to a processor or amplifier with an optical/coaxial digital input jack
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/DTS/MPEG Audio
surround processor to your Player’s optical/coaxial digital jack provides richer and more powerful audio play.
You can make this connection using either a coaxial digital cable or an optical digital cable.
NOTES:
• This connection is not possible if the processor or amplifier to which you want to connect does not have an optical/coaxial
digital input jack.
• ANALOG AUDIO OUT of the DVD player is not available on the DTS audio.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-
ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and
video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of
the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction sup-
plied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable
from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked
“ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE
•The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
DVD Player
DIGITAL IN
COAXIAL
OPTICAL
VIDEO RL CB
CRY
S-VIDEO
VIDEO OUT
COMPONENT
COAXIAL
OPTICAL
AUDIO OUT
DIGITAL
To optical digital
input jack
To coaxial digital
input jack
or
To OPTICAL
DIGITAL OUT
jack
To COAXIAL
DIGITAL OUT
jack
Optical digital cable
(commercially
available)
Coaxial digital cable
(commercially available)
Dolby Digital (5.1 ch)/DTS/
MPEG Audio processor
or amplifier
SETTING UP YOUR DVD PLAYER
E56B5AD.QX3 02.8.24 11:18 AM Page 11

–12 –EN
Getting started
Tu rn on the power of the TV, amplifier and any other compo-
nents which are connected to the DVD.
Make sure the TV and audio received (optional) are set to
the correct channel.
When you play NTSC disk, the NTSC signal will convert to a
modified PAL signal.
Press OPERATE.
•“P-ON” will appear briefly on the display panel.
Press OPEN/CLOSE to open disc loading tray.
Place the chosen disc in the tray, with the label
facing up.
Press PLAY.
•Playback starts automatically.
Press STOP to stop playback.
NOTE:
•DVDs may have a region code. Your DVD player will not
play discs that have a region code different from the
region code of your DVD player.
5
4
3
2
1
CDDVD
Press MENU.
•The DVD’s main menu will appear.
If a title menu is no available, symbol may
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press Arrow ( L/ K/ B/ s) to select an item, and
ENTER to confirm selection.
4
3
2
1
DVD
DVD OPERATION
Basic Playback
Disc menus
DVDs may contain menus to navigate the disc and access
special features. Press the appropriate numerical key or use
Arrow ( L/ K/ B/ s) to highlight your selection in the DVD
menu and press ENTER to confirm.
NOTE:
•Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
General Features
Press TITLE.
•The title menu will appear.
If a title menu is no available, symbol may
appear on the TV screen.
Press Arrow ( L/ K/ B/ s) to select an item, and
ENTER to confirm selection.
•Playback will begin at the selected Title.
3
2
1
DVD
During playback, press PAUSE.
•Playback will pause and sound will be muted.
To continue playback, press PLAY.
2
1
CDDVD
Title Menu
Pause
E56B5AD.QX3 02.8.24 11:18 AM Page 12

–13 –EN
During playback, press PAUSE.
•Playback will pause and sound will be muted.
The disc goes forward by one frame each time
PAUSE is pressed.
To exit step by step playback, press PLAY.
3
2
1
DVD
During playback, press STOP.
•Resume message will appear on the TV screen.
Press PLAY, playback will resume from the point
at which playback was stopped.
•To cancel resume, press STOP twice.
2
1
CDDVD
Resume
Step by Step playback
During playback, press ggor hhrepeatedly to
select the required forward or reverse speed: x2,
x8, x30, x60.
To return to normal playback, press PLAY.
•Use ggor hhto select the required forward or
reverse at x16 the normal playback speed.
CD
2
1
DVD
Fast Forward / Reverse Search
During playback, press PAUSE.
Press gg.
•Slow motion playback will begin and sound will be
muted.
Press ggrepeatedly to select the required speed:
1/16, 1/8, 1/2 of the normal playback.
To return to normal playback, press PLAY.
4
3
2
1
DVD
Slow Motion
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
During playback, press ZOOM.
•Playback will continue.
Press ZOOM repeatedly to select the required
zoom factor: x2, x4 or OFF.
Use Arrow ( L/ K/ B/ s) to move the zoomed
picture across the screen.
To exit zoom mode, press ZOOM to OFF in the
menu bar.
4
3
2
1
DVD
Zoom
There are three ways to begin playback on an Audio CD at a
specific Track.
Using the Numerical key pads
Press numerical key pad to enter the desired
Track number.
•Playback will start at the selected track.
•For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
•To play track 26, press +10, 2, 6 on the numerical key
pad.
Using the DIRECT SKIP
Press DIRECT SKIP.
•The track search display appears.
Within 30 seconds, select a desired track number using
numerical key pad.
•Playback will start at the selected track.
Using the SKIP HHGG
Press SKIP GGto move to the next track.
Press SKIP GGor HHrepeatedly to skip subsequent or
to return of the current tracks.
•Track number will appear briefly on the DVD display
panel.
•When playback is paused, pressing SKIP will start the
track playing automatically.
NOTE:
•SKIP HG are not available when playback is
stopped.
2
1
2
1
1
CD
Track
DVD OPERATION
E56B5AD.QX3 02.8.24 11:18 AM Page 13

Press DIRECT SKIP to display the Title/Chapter
Search on the TV screen.
Enter the desired title/chapter number using
numerical key pad.
2
1
DVD
Title/chapter
During playback, press DIRECT SKIP twice to dis-
play the Time Search on the TV screen.
Within 30 seconds, enter a desired disc time using
numerical key pad.
•Playback will start at the specified time.
Press CLEAR to erase the incorrect input.
3
2
1
CDDVD
Time Search
•To repeat the current chapter, press REPEAT.
REPEAT CHAPTER appears on the TV screen.
•To repeat the current title, press REPEAT twice.
REPEAT TITLE appears on the TV screen.
•To exit Repeat mode, press REPEAT three times.
REPEAT OFF appears on the TV screen.
DVD
Repeat
REPEAT TITLE/CHAPTER
•To repeat the current track, press REPEAT.
REPEAT TRACK appears on the TV screen.
•To repeat the entire disc, press REPEAT twice.
REPEAT ALL appears on the TV screen.
•To exit Repeat mode, press REPEAT three times.
REPEAT OFF appears on the TV screen.
CD
REPEAT TRACK
REPEAT A-B
Press Repeat A-B at your chosen starting point.
•REPEAT A- appears briefly on the TV screen.
Press Repeat A-B again at your chosen end point.
•REPEAT A-B appears briefly on the TV screen, and the
repeat sequence begins.
To exit the sequence, press Repeat A-B.
3
2
1
CDDVD
You may determine the order in which tracks will play.
In stop mode press MODE.
•The programme screen will appear.
Enter the desired track numbers using numerical
key pad.
Press PLAY to play the programmed tracks.
3
2
1
CD
Programme
PROGRAM TIME 0:00:00 1/1
RANDOM : MODE EXIT : RETURN
START: PLAY DELETE : CLEAR
--
This shuffles the playing order of tracks instead of playback
in the sequence.
In stop mode press MODE twice.
•RANDOM screen appears.
Press PLAY to start random playback.
2
1
CD
Random Playback
–14 –EN
DVD OPERATION
•REPEAT are available only during playback.
E56B5AD.QX3 02.8.24 11:18 AM Page 14

–15 –EN
DVD OPERATION
When a CD with MP3 files in the DVD player, the MP3 menu
will appear on the TV screen.
In stop mode press Kor Lto select the desired
Album or Track.
•To play a choosen track, press PLAY or ENTER.
•To play a choosen album, press Kor Lto select the
desired track,then press PLAY or ENTER.
•Choose FIRST PLAY to start playback from the begin-
ning of the listed tracks.
•Press TITLE to return to the first item.
Press STOP to stop playback.
NOTE:
•Folders are known as Albums; files are known as Tracks.
2
1
MP3
MP3 Playback
Track Selection
During playback, press DIRECT SKIP.
•The SEARCH menu will appear.
•The current track will be highlighted.
Press Kor Lto select a desired track.
Press PLAY to start playing
Press RETURN or DIRECT SKIP to exit.
4
3
2
1
MP3
+ALBUM01
TRACK11
TRACK12
TRACK13
TRACK14
ALBUM NAME
1/15
START : PLAY
SELECT: / ENTER:
RETURN:
In stop mode press MODE.
Press Kor Lto select a track, then press ENTER.
•Press CLEAR to erase the incorrect input.
Press PLAY to start programmed playback.
3
2
1
MP3
In stop mode press MODE twice.
Press PLAY to play the tracks in random order.
2
1
MP3
Programmed
Random Playback
RANDOM: MODE EXIT : RETURN
START : PLAY DELETE: CLEAR
+ALBUM11
+ALBUM12
TRACK11
TRACK12
TRACK13
TRACK11
PROGRAM - ALBUM01
1/11 1/1
The DVD player allows you to select a language during DVD
disc (if multi language available) playback.
During playback, press AUDIO.
Press AUDIO repeatedly to select your desired
language.
NOTE:
•When a DVD disc with MPEG 5.1CH Audio is played
back, MPEG 6.0CH might appear instead of MPEG
5.1CH on the screen.
2
1
DVD
Audio Language
During playback, press AUDIO repeatedly to select
between AUDIO STEREO, AUDIO L-CH or AUDIO
R-CH.
AUDIO STEREO - both right and left channels are active
(stereo)
AUDIO L-CH - only left channel is active
AUDIO R-CH - only right channel is active
1
CD
Stereo Sound Mode
You can check the MP3 files during playback.
Press ON SCREEN.
•The playing track will be highlighted.
Press ON SCREEN again to show the elapsed
playing time appear at the top of the display.
•will be displayed when the repeat play has been
selected.
T-indicates Track repeat
A-indicates Album (folder) repeat
D-indicates Disc repeat
Press ON SCREEN again to exit.
3
2
1
MP3
On Screen Information

Some DVD discs contain scenes which have been shot
simultaneously from various angles.
During playback, press ANGLE.
Press ANGLE repeatedly to select your desired
different angle appears on the right of the angle
display.
2
1
DVD
The DVD player allows you to select a language for subtitle
during DVD disc (if available) playback.
During playback, press SUBTITLE.
Press SUBTITLE repeatedly to select your desired
subtitle language.
•The available languages appears on the right of the
subtitle display.
To turn off subtitles, press s/ Bor SUBTITLE
repeated until OFF appears.
3
2
1
DVD
Subtitle Language
Camera Angle
You can check information about the current disc by pressing
the ON SCREEN on the remote control.
During playback, press ON SCREEN to show cur-
rent Chapter.
•The elapsed and remaining playing time of the current
chapter will be displayed.
Press ON SCREEN again to show current Title.
•The elapsed and remaining playing time of the current
title will be displayed.
Press ON SCREEN the third time.
•The BIT RATE, layer number (if available) and the cur-
rent repeat setting will be displayed.
Press ON SCREEN the fourth time to remove the
display.
4
3
2
1
DVD
Changing the On-Screen Display
During playback press ON SCREEN, the current
Track will be displayed on the TV screen.
•The elapsed and remaining playing time of the current
title will be displayed.
Press ON SCREEN again to show current Total
Tra ck .
•The elapsed and remaining playing time of the current
total track will be displayed.
Press ON SCREEN the third time to remove the
display.
3
2
1
CD
Password
Parental Control limits the disc viewing that exceed your set-
tings with a password or playback will stop.
The ‘Parental Control’ feature allows you to prevent discs
from being played by your children or to have certain discs
played with alternative scenes.
In stop mode press SETUP.
Press Kor Lto select PARENTAL, then press
ENTER.
Enter your four-digit password.
•If for the first time, enter any four digits, then press
ENTER.
•To change the password, press Kor Lto select
CHANGE, then press ENTER.Enter the four-digit pass-
word, then press ENTER.
Press SETUP to exit.
4
3
2
1
1. LANGUAGE
2. DISPLAY
3. AUDIO
4. PARENTAL
SET-UP
EXIT : SETUP CANCEL : RETURN
SELECT: / SET : ENTER
Please enter a 4-digit password.
- - - -
SET-UP
EXIT : SETUP
CANCEL : RETURN
PARENTAL CONTROLS
PASSWORD
Parental Control
–16 –EN
DVD OPERATION
IF YOU FORGET THE PASSWORD
In stop mode press SETUP.
Press Kor Lto select PARENTAL, then press
ENTER.
Enter the 4, 7, 3, 7.
•Password will be cleared and parental level will be set
ALL.
Press SETUP to exit.
4
3
2
1
E56B5AD.QX3 02.8.24 11:18 AM Page 16

–17 –EN
DVD OPERATION
Use markers to memorise your favourite places on a disc.
During playback, press DIRECT SKIP three times.
•The display screen and Markers will appear on the TV
screen.
Press sor Bto select 1, 2, 3, 4 or 5 and ensure
that “NOT SET” appears in the display.
When reaches the desired point, press ENTER.
•The Title or Track and elapsed playing time will appear
in the TV screen.
To return to the Marker later, press DIRECT SKIP
three times during playback and sor Bto choose
the desired marker, then press ENTER.
NOTE:
•Opening the disc tray or turning off the power or select
AC at step and press ENTER will erase all Markers.
2
4
3
2
1
CDDVD
Marker Setup Screen
Parental Level allows you to set the rating level of your DVD
discs. Playback will stop if the disc’s ratings exceed the level
you set.
In stop mode press SETUP.
Press Kor Lto select PARENTAL, then press
ENTER.
Enter your four-digit password.
Press Kor Lto select PARENTAL LEVEL, then
press ENTER.
Press Kor Lto select the desired level.
Press SETUP to exit.
6
5
4
3
2
1
DVD
1. PARENTAL LEVEL ALL
2. CHANGE
SET-UP
EXIT : SETUP CANCEL : RETURN
SELECT: / SET : ENTER
PARENTAL CONTROLS
Parental Level
E56B5AD.QX3 02.8.24 11:18 AM Page 17

You can change certain aspects of the DVD’s display
screens, on-screen messages and the display panel on the
front of the DVD player.
In stop mode press SETUP.
Press Kor Lto select DISPLAY, then press
ENTER.
Press Kor Lto select the below items, then press
ENTER.
TV Aspect:
•Press Kor Lfor an item selection, then press
ENTER.
•Select 4:3 LETTER BOX for a black bars appears on
the top and bottom of the screen.
•Select 4:3 PAN & SCAN for a full height picture with
both sides trimmed.
•Select 16:9 WIDE if a wide-screen TV is connected to
the DVD player.
Panel Display:
•Press Kor Lto select BRIGHT, DIMMER and AUTO,
then press ENTER.
•This adjust the brightness of the display panel with the
factory default BRIGHT.
•When AUTO is selected, the display dims only during
playback.
Angle Icon:
• Press ENTER repeatedly to turn Angle icon ON or
OFF.
•The default setting is ON.
Auto Power Off:
• Press ENTER repeatedly to turn Auto Power ON or
OFF.
•The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.
Press SETUP to exit.
4
3
2
1
Display Setting
Choose the appropriate Audio settings for your equipment as
it only affect during the playback of DVD discs of the DVD
player.
NOTE:
• These audio settings are effective only when using a digi-
tal connection. Although you may change the settings from
the on-screen display, these audio settings do not actually
affect the sound when using an analogue connection.
In stop mode press SETUP.
Press Kor Lto select AUDIO, then press ENTER.
Press Kor Lto choose the below items and press
ENTER repeatedly to turn the setting ON or OFF.
Dynamic Range Control (DRC):
•The default setting is OFF.
•To compress the range of sound volume.
Dolby Digital :
•The default setting is BITSTREAM.
(BITSTREAM : Output by Dolby Digital)
(DPCM : Convert the Dolby Digital to D-PCM)
Set to BITSTREAM when the unit is connected to
Dolby Digital Decoder.
DTS:
•The default setting is OFF.
Set to ON when the unit is connected to DTS Decoder.
(ON: Output by DTS)
MPEG:
•The default setting is OFF.
(ON : Output by MPEG sound)
(OFF: Convert the MPEG to PCM)
Set to ON when the unit is connected to MPEG Decoder.
DOWN SAMPLING:
•The default setting is AUTO.
• Press ENTER, then Kor Lto select AUTO, 48kHz or
96kHz. Press ENTER again to confirm selection.
•Select 96kHz if the disc was recorded in PCM 96kHz,
otherwise select 48kHz.
Press SETUP to exit.
4
3
2
1
Audio Setting
–18 –EN
DVD SETUP
Adjust the Black Level Settings to make the black parts of
the picture as bright as you preferred.
During playback, press MODE .
Press ENTER repeatedly to select ON or OFF.
ON: makes the dark parts brighter.
OFF: shows the original picture as recorded.
2
1
Black Level Setting
E56B5AD.QX3 02.8.24 11:18 AM Page 18

–19 –EN
DVD SETUP
A-B
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
C-E
Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166
F-H
Faroese 5261
Fiji 5256
Finnish [FIN] 5255
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467
I-K
Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767
L-N
Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061
O-R
Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467
S
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568
T
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Tu r kish [TUR] 6664
Tu r kmen 6657
Twi 6669
U-Z
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yo r uba 7161
Zulu 7267
Language Code Language Code Language Code Language Code
Language options are not available is all discs.
In stop mode press SETUP.
Press Kor Lto select LANGUAGE, then ENTER
to confirm.
•The setup screen will be displayed.
Press Kor Lto select AUDIO, SUBTITLE, DISC
MENU or PLAYER MENU, then ENTER to confirm.
Press Kor Lto select a setting, then press
ENTER.
•If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the
code for the desired language.
•You can only select other languages if its available on
the disc.
Press SETUP to exit.
5
4
3
2
1
1. AUDIO ORIGINAL
2. SUBTITLE OFF
3. DISC MENU ORIGINAL
4. PLAYER MENU ENGLISH
SET-UP
EXIT : SETUP CANCEL : RETURN
SELECT: / SET : ENTER
LANGUAGE CONTROLS
Language Setting
If you choose a Language that has a 3 letter language code, the code will be displayed everytime you change
the Audio or Subtitle language setting on pages 15 and 16. If you choose any other languages, ‘---’ will be dis-
played instead. (3 letter language code is written in bracket.)
E56B5AD.QX3 02.8.24 11:18 AM Page 19

TROUBLESHOOTING
–20 –EN
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the
system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair.
Problem Solution
No power –Check if the AC power cord is properly connected.
No picture –Check if the TV is switched on.
–Check the video connection
Distorted picture –Sometimes a small amount of picture distortion may appear .This is
not a malfunction.
Completely distorted picture or –Connect DVD player directly to the TV.
black/white picture with DVD –Make sure the disc is compatible with the DVD player.
No sound or distorted sound –Adjust the volume.
–Check that the speakers are connected correctly.
No audio at digital output –Check the digital connections.
–Check if the audio format of the selected audio language matches
your receiver capabilities.
No DTS audio at analog output –Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.
No sound and picture –Check that the VIDEO/AUDIO cable is connected to the correct
device (See Connecting to a TV)
Picture freezes momentarily –Check the disc for fingerprints/scratches and
during playback clean with a soft cloth wiping from centre to edge.
Disc can’t be played –Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
No return to start-up screen when –Reset the unit by switching the player off, then on
disc is removed again.
The player does not respond to –Aim the remote control directly at the sensor on
the remote control the front of the player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
Buttons do not work or player stops –To completely reset the player, unplug the AC
responding cord from the AC outlet for 5-10 seconds.
Player does not respond to some –Operations may not be permitted by the disc.
operating commands during playback. Refer to the instructions of the disc.
DVD player cannot read –Use a commonly available cleaning CD/DVD to
CDs/DVDs clean the lens before sending the DVD player for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
E56B5AD.QX3 02.8.24 11:18 AM Page 20