Sharp HT-DV50H User manual

HT-DV50H To install the speaker stand
This Quick Start Guide will help you to correctly install
and operate your system.
If you require any advice or assistance regarding
your Sharp product, please visit our website
www.sharp.co.uk/customersupport.aspx.
Customers without Internet access may telephone
0845 880 0512 during office hours (or [phone]
if telephoning from Ireland).
Bottom
cabinet
Speaker
wire
Stand
Top
cabinet
Attach the top cabinet to bottom
cabinet and fix them securely with
the supplied 2 screws.
Connect the wire without insulation
tube to the speakers minus (
- )
terminal, and the wire with red
insulation tube to the speakers plus (+)
terminal.
Connect the other end of speaker wire
to the main unit.
Route the speaker wire through a
stand hole and attach the bottom
cabinet to stand.
Fix them securely with the supplied
washer 3 screws.
134
5
2
TINSEA237AWZZ
08A
R AS
S-VIDEO IN
VIDEO IN
Right speaker Left speaker
FM aerial
Subwoofer
To a wall socket
Left speaker
Red
Red
Purple

Installation image:
Listening to the DVD sound
START
Turn on the TV, and switch the input to the “VIDEO 1”,
“VIDEO 2”, etc. accordingly.
Battery installation
1 2 3
45 6
78 9
+100+10
1
2
3
Press the ON/STAND-BY button
to turn the power on.
Press the DVD/CD button to
set the input to “DVD”.
Insert the disc into the disc
slot, label side up.
Press the ON/STAND-BY button again
to set the unit to the stand-by mode.
NO DISC
4
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
This operation will erase all data stored in memory including clock, timer settings, tuner preset and CD programme.
L If trouble occurs
L Factory reset, clearing all memory
If such a problem occurs, do the following:
Caution:
1 Press the ON/STAND-BY button to enter the power stand-by mode.
2 Whilst pressing down the cbutton, press the ON/STAND-BY button until “CLEAR ALL” appears.
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
If playback does not start, press
the DVD/CD button.
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or
similar).
Enjoying various sounds Refer to the operation manual
(pages 32 - 35)
Select any of the 8 preset modes already set to the optimal sound quality levels.
Select a desired sound mode by pressing the SHIFT and SOUND MODE buttons simultaneously.
STANDARD
CINEMA
NEWS
SPORT
NIGHT
DisplayPreset sound mode
MUSIC
BASS
TREBLE
1 Open the battery cover.
2 Insert the batteries as shown.
3Close the cover.
Unit
Subwoofer
Speakers
(left and right)