1Press the CD button.
2Press the 1 button and within 5 seconds, press the OPEN/
CLOSE button to open the disc tray 1.
3Place the disc on the disc tray 1, label side up.
4Press the OPEN/CLOSE button to close the disc tray 1.
5You can place discs on trays 2 - 5 by following steps 2 - 4.
6Press the / button to start playback.
12 cm (5")8 cm (3")
1Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
2Press the TUNING ( or ) button to tune in to the desired sta-
tion.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first re-
ceivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST"indicator.
" " will appear when an FM broadcast is in stereo.
1Press the TAPE button.
2Open the cassette compartment by
pushing the area marked "PUSH
EJECT".
3Load a cassette into the cassette
compartment with the side to be
played facing you.
4Press the / button to start playback.
Listening to a CD or MP3/WMA disc Listening to a cassette tape
Listening to the radio If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-by
mode.
2. Whilst pressing down the ¶8¶8
¶8¶8
¶8 button and the
X-BASS/DEMO button, press the TUNING button until
"CLEAR AL"appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Maintenance
Routine maintenance is required for continued optimum perfor-
mance, refer to the operation manual.
FM stereo mode indicator
FM stereo receiving indicator
XL-MP110EE QG 2/28/05, 7:20 PM2
Downloaded from: http://www.usersmanualguide.com/
