10
d) To Delete
You can only delete the file in STOP mode. Press and hold EQ/DEL key for about 2 seconds. There will be a
message asking your confirmation to delete. Select Yes or No using “+” or “-“ key and press MENU key to
confirm. There will be a message informing you File Deleted.
FM MODE
Click on MENU key and navigate using “+” or “-“ key to FM TUNER. Click MENU key to enter. The RADIO word
will display on the top middle of the screen.
a) Auto Program Search
b) Under FM TUNER mode:
I) Manual Program Search: Press MENU button and the word RADIO will change to SEARCH. Use ‘+’
or ‘-‘ to increment/decrement by 0.1MHz. Once you have confirmed the channel, press MENU
again. The word SEARCH will change to SAVE. To confirm press REC/AJBkey to save the
current channel.
II) Auto Program Search: Press MENU and you will see the word RADIO will change to SEARCH.
Press EQ/DEL and “-” key simultaneously and the player will auto scan and save all 30 channels.
You will see the word SEARCH changed to AUTO. To stop, press REC/AJB key.
III) Forced Mono Channel: When FM frequency modulation program has bad stereo effect, press
ln/key to achieve forced mono function. This can reduce noise. Press ln/key again to
resume stereo.
IV) Volume Control: While FM is playing, press and hold “+” or “-“ to increase or decrease volume.
V) FM Recording: Press and hold REC/AJB key for about 2 seconds and let go. The source should be
FM. Navigate using ‘+’ or ‘-‘ key to Rate. Press MENU key to change the rate between 8, 11, 16,
22, 32KHz. Navigate to Record and press MENU key to start recording. Once done, press
REC/AJB key. The file will be saved as FXXX.WAV where XXX is 000 to 999.
VI) Exit: Press and hold MENU key for about 2 seconds and navigate to other mode.
