Siemens SITOP User manual

SIEMENS AG ÖSTERREICH, 05.2001 1/ 8 SITOP Zusatzmodul Netzpufferung
SITOP 6EP1961-3BA00
Puffermodul
Mains buffer module
Betriebsanleitung Best. Nr.: C98130-A7541-A1-01-6419
Operating instructions
Instructions
Istruzioni di servizio
Instrucciones

SIEMENS AG ÖSTERREICH, 05.2001 2/ 8 SITOP Zusatzmodul Netzpufferung
Maßbild
Dimension drawings
Encombrement
Disegno quotato
Croquis acotado
Verdrahtungshinweis
Wiring information
Remarque relative
au câblage
Indicazione per il
cablaggio
Información para
cableado
Hinweis
Diese Betriebsanleitung enthält aus Gründen der Übersichtlichkeit nicht sämtliche Detailinformationen zu allen Typen des Produkts und kann auch nicht jeden
denkbaren Fall der Aufstellung, des Betriebes oder der Instandhaltung berücksichtigen. Weiterführende Hinweise erhalten Sie über die örtliche Siemens-
Niederlassung bzw. über die Homepage http://www.siemens.de/sitop. Technische Änderungen jederzeit vorbehalten. In Zweifelsfällen gilt der deutsche Text
Note
These instructions cannot claim to cover all details of possible equipment variations, nor in particular can they provide for every possible example of installation,
operation or maintenance. Further information is obtainable from your local Siemens office or see homepage http://www.siemens.de/sitop. Subject to change
without prior notice. The German text applies in cases of doubt
Note
Pour des raisons de clarté, cette notice ne contient pas toutes les informations de détail relatives à tous les types du produit et ne peut pas non plus tenir compte
de tous les cas d'installation, d'exploitation et de maintenance imaginables. Pour de plus amples informations, veuillez-vous adresser à votre agence Siemens
ou consultez notre site http://www.siemens.de/sitop. Sous réserve de modifications techniques. En cas de divergences, le texte allemand fait foi
Nota
Ai fini della chiarezza le presenti istruzioni di servizio non contengono tutte le informazioni dettagliate su tutti i tipi del prodotto e non possono nemmeno trattare
tutti i casi di installazione, di esercizio o di manutenzione. Per ulteriori informazioni rivolgersi alla filiale Siemens di zona o consultare la homepage
http://www.siemens.de/sitop. Ci riserviamo eventuali modifiche tecniche. In caso di differenze o problemi è valido il testo tedesco
Nota
Por razones de claridad, estas instrucciones no contienen todas las informaciones detalladas relativas a todos los tipos del producto ni pueden considerar todos
los casos de instalación, de operación y de mantenimiento imaginables. Para más información, contacte con la sucursal local de Siemens o visite la Web
http://www.siemens.de/sitop. Sujeto a cambios técnicos sin previo aviso. En casa de duda, prevalece el texto aleman.
Last
load
7,1
120,5
132,2
126,5
70
125
44,7

SIEMENS AG ÖSTERREICH, 05.2001 4/ 8 SITOP Zusatzmodul Netzpufferung
English
!WARNING
Hazardous voltages are present in certain parts of this electrical equipment during operation.Incorrect handling of the
equipment can result in death, severe personal injury or substantial property damage. Only qualified personnel are allowed
to work on or around this equipment. The successful and safe operation of this equipment is dependent on proper transport,
storage and installation.
Before installation or maintenance work is carried out, the mains switch must be switched off and locked to prevent it from
being switched on again. If these rules are not adhered to, contact with live parts or improper use can result in death or
severe personal injury.
CAUTION
The device may only be opened by qualified personnel. Electrostatically sensitive devices (ESD)
Description
The optional mains buffer module is a built-in device belonging to the SITOP series.
The device must be installed taking into account all relevant DIN/VDE specifications and other national standards.
It is used in combination with a stabilized 24 V load power supply unit (SITOP 20A (6EP1436-3BA00) or SITOP 40A (6EP1437-3BA00)) to
buffer the load current if the AC power supply is interrupted temporarily.
The buffer module is connected in parallel with the SITOP load power supply unit. The "+" input of the buffer module must be connected to
the "+" output of the power supply unit for this purpose, and the "-" input of the buffer module to the "-" output of the power supply unit (see
wiring information on page 2). The buffer module must be wired with the same conductor cross-section as the output cable of the power
supply.
Technical data
Input variables
Rated input voltage Ue:
24 V DC
Operating voltage range:
24...28.8 V
Output variables
Output DC voltage Ua: in buffer mode:
Ue– 1 V
Output DC current Ia:
0 - 40 A
Mains buffering :
with 40 A load current: 100 ms
with 20 A load current: 200 ms
The buffering time is longer for smaller load currents.
The maximum possible buffering time is 3 seconds.
Protection and monitoring
function
Static current limiting:
typ. 40 A
Signaling:
Green LED: Supply voltage >20.5 V
Ambient
Temperature
Storage and transport: -25 to +85°C
Operation: 0 to +60°C
Humidity rating corresponds to climatic category
3K3 acc. to EN60721 Part 3, no condensation
Natural air cooling
Specifications
Degree of protection: IP20 acc. to IEC 529
Safety class 1 acc. to IEC 536
Safety acc. to VDE 0160 and VDE 0805
(EN 60950): SELV
Emitted interference acc. to EN50081-1
Radio interference suppression acc. to EN
55022, limit curve B
Noise immunity acc. to EN 50082-2, incl. Table
A4
UL 508 / CSA 22.2 in preparation
Weight
1,2 kg
Installation
Mounting on a DIN EN 50022-35x15/7.5 standard rail. To ensure adequate cooling, the device must be installed vertically, with the
terminals at the bottom. Be sure to leave a minimum clearance of 50 mm above and below the device.
Connections and terminal assignment
Terminals Function Terminal range Remarks
1, 2Output voltage DC 24 V 0.33 to 10mm2
AWG 22 to 8 Screw-type terminals. Use a screw driver with a blade width of 5 mm. Recommended tightening torque 1.2 Nm.