Siemens Tiastar LV MCC User manual

www.usa.siemens.com
Instruction manual
Siemens tiastar™ Gateway Unit

Contents
1. Introduction 1
2. Configure Profibus Network for Gateway 3
2.1. STEP 1: Create a new project 4
2.2. STEP 2: Add the master unit 5
2.3. STEP 3: Configure the master 6
2.4. STEP 4: Add a Simocode Pro to the hardware configuration 8
2.5. STEP 5: Add an RVSS to the hardware configuration 10
2.6. STEP 6: Add an MM440 to the hardware configuration 12
2.7. STEP 7: Save file 13
3. Configure Gateway 14
3.1. STEP 1: Configure the network nodes 14
3.2. STEP 2: Launch gateway configuration software 15
3.3. STEP 3: Review the network addressing 17
3.4. STEP 4: Connect to the Profibus configuration port 18
3.5. STEP 5: Download the Profibus configuration 19
3.6. STEP 6: Connect to gateway configuration port 20
3.7. STEP 7: Launch hyperterminal 21
3.8. STEP 8: Cycle power to the gateway 24
3.9. STEP 9: Configure the gateway 25
3.9.1. Choose Option 4 : Show fieldbus system configuration 27
3.9.2. Choose Option 6 : Change Configuration 28
3.10. STEP 9: Tesing the gateway configuration 32
4. Modbus mapping 33
5. Device data 39
5.1. SIMOCODE 39
5.2. RVSS (3RW44) 41
5.3. VFD (MM440) 43

1. Introduction
This manual documents how to:
Configure Configure the profibus network configuration for the MCC,and configure the gateway itself for operation.
This involves the following steps:
  •ConnecttothegatewayusingHYPERTERMINALandconfiguringoperation
  •CreatetheProfibusnetworkconfigurationoftheMCC
Download DownloadtheProfibusconfigurationtothegateway.
Verify Verify the proper operation of the gateway.
s Instruction manual - tiastar Gateway Unit 1
© Siemens Industry Inc. 2011. All rights reserved.

s Instruction manual - tiastar Gateway Unit
2© Siemens Industry Inc. 2011. All rights reserved.

2. Configure Profibus Network for Gateway
The program we will be using is:
s Instruction manual - tiastar Gateway Unit 3
© Siemens Industry Inc. 2011. All rights reserved.

2.1. Step 1: Create a new project
s Instruction manual - tiastar Gateway Unit
4© Siemens Industry Inc. 2011. All rights reserved.

2.2.Step2:AddtheMasterUnit
SelecttheAnybusMasterobjectand
drag it over to the network area.
s Instruction manual - tiastar Gateway Unit 5
© Siemens Industry Inc. 2011. All rights reserved.

2.3. Step 3: Configure the Master
Double-click to configure the master
Youwillthengetthisdefaultconfiguration
s Instruction manual - tiastar Gateway Unit
6© Siemens Industry Inc. 2011. All rights reserved.

SelecttheMULTI-MASTERDP
configuration setting
ThensaveitbypressingOK
s Instruction manual - tiastar Gateway Unit 7
© Siemens Industry Inc. 2011. All rights reserved.

2.4. Step4:AddaSimocodeProtothehardwareconfiguration
Important Note:
Alwayschoosethe<BasicType1>versionoftheunitforProV.Only<BasicType2>isavailableforProC.
SelecttheSIMOCODEobjectfrom
the device tree and drag to the
network line on the master
Thisiswhatthesimocodedevice
looks like after being added to
the network configuration …
Select the device type and drag it
over to the slot configuration.
s Instruction manual - tiastar Gateway Unit
8© Siemens Industry Inc. 2011. All rights reserved.