Siemens SIMATIC Industrial Flat Panel IFP1500 User manual

Industrial Flat Panel IFP1500, IFP1900,
IFP2200
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_____________
_
____
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
SIMATIC
Industrial Monitors
Industrial Flat Panel IFP1500,
IFP1900, IFP2200
Operating Instructions
09/2012
A5E31298376-AA
Preface
Overview
1
Safety information
2
Installing and connecting the
device
3
Commissioning the device
4
Operating the device
5
IPC Wizard functions
6
Maintaining and servicing
your device
7
Technical information
8
Technical Support
A
List of abbreviations
B

Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E31298376-AA
Ⓟ 10/2012 Technical data subject to change
Copyright © Siemens AG 2012.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 3
Preface
These operating instructions contain all the information you need for commissioning and
operation of the SIMATIC Industrial Flat Panel IFP.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of the operating instructions
These operating instructions apply to the following device versions:
● Industrial Flat Panel Standard
Name Version Display diagonal Order number
IFP1500 Monitor Standard 15" 6AV7863-2AA00-....
IFP1900 Monitor Standard 19" 6AV7863-3AA00-....
IFP2200 Monitor Standard
Monitor
Standard
22" 6AV7863-4AA00-....
IFP1500 Touch Standard 15" 6AV7863-2TA00-....
IFP1900 Touch Standard 19" 6AV7863-3TA00-....
IFP2200 Touch Standard
Touch
Standard
22" 6AV7863-4TA00-....
● Industrial Flat Panel Extended for distances >5 m:
Name Version Display diagonal Order number
IFP1500 Monitor Extended 15" 6AV7863-2AB10-....
IFP1900 Monitor Extended 19" 6AV7863-3AB10-....
IFP2200 Monitor Extended
Monitor
Extended
22" 6AV7863-4AB10-....
IFP1500 Touch Extended 15" 6AV7863-2TB10-....
IFP1900 Touch Extended 19" 6AV7863-3TB10-....
IFP2200 Touch Extended
Touch
Extended
22" 6AV7863-4TB10-....
IFP1500 Touch/Key
Extended
Touch/Key
Extended
15" 6AV7863-2BB10-....

Preface
Industrial Flat Panel IFP1500, IFP1900, IFP2200
4 Operating Instructions, 09/2012, A5E31298376-AA
The following operating systems are released for the IPC Wizard functions:
Microsoft Windows (32-bit)
● Windows XP Professional, SP3 or higher 1)
● Windows Embedded Standard 2009, SP3 or higher 1)
● Windows 7 Ultimate
● Windows Embedded Standard 7
● Windows Server 2008
Microsoft Windows (64-bit)
● Windows 7 Ultimate
● Windows Server 2008 R2
1) Not with IFP1500 Touch/Key Extended
Scope of this documentation
The SIMATIC Industrial Flat Panel is supplied with the following documents:
● Quick Install Guide - SIMATIC IFP1500, IFP1900, IFP2200
Printed installation and commissioning instructions
● Operating instructions - SIMATIC IFP1500, IFP1900, IFP2200
You will find the operating instructions in PDF format on the "Documentation and Drivers"
CD/DVD.
Operating Manual - SIMATIC IPC Wizard
You will find the operating manual:
– On the "Documentation and Drivers" CD/DVD included in the delivery
– In the IPC Wizard installation folder on the PC after successful installation of the IPC
Wizard
Conventions
In these operating instructions, the SIMATIC IFP is also referred to as "Flat Panel" or
"device".
In these operating instructions, the terms "Windows Embedded Standard 2009" and
"Windows Embedded Standard 7" are also abbreviated with the term "Windows Embedded
Standard". "Windows 7" is used as an abbreviation for "Windows 7 Ultimate".
Figures
This manual contains figures of the described devices. The supplied device may differ in
some details from the figures. In some figures the IFP1500 Touch is shown as
representative for all Flat Panels.
History
The following earlier release versions of these operating instructions have been published:
Edition Comment
09/2012 First Edition

Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 5
Table of contents
Preface ...................................................................................................................................................... 3
1 Overview.................................................................................................................................................... 9
1.1 Product description ........................................................................................................................9
1.2 Scope of delivery .........................................................................................................................10
1.3 Construction of the devices..........................................................................................................11
1.3.1 IFP1500, IFP1900, IFP2200 Touch .............................................................................................11
1.3.2 IFP1500 Touch/Key .....................................................................................................................13
1.3.3 Interfaces .....................................................................................................................................14
1.3.3.1 Standard versions ........................................................................................................................14
1.3.3.2 Extended versions .......................................................................................................................14
1.4 Accessories..................................................................................................................................15
2 Safety information.................................................................................................................................... 17
2.1 General safety instructions ..........................................................................................................17
2.2 Security information .....................................................................................................................18
2.3 Notes about usage.......................................................................................................................19
3 Installing and connecting the device ........................................................................................................ 23
3.1 Preparing for installation ..............................................................................................................23
3.1.1 Checking the delivery...................................................................................................................23
3.1.2 Permitted mounting positions.......................................................................................................25
3.1.3 Checking clearances....................................................................................................................27
3.1.4 Preparing the mounting cutout.....................................................................................................28
3.1.5 Labeling the function keys ...........................................................................................................29
3.2 Mounting the device.....................................................................................................................31
3.2.1 Notes on installation.....................................................................................................................31
3.2.2 Position of the mounting clamps or latch fasteners .....................................................................32
3.2.3 Mounting the device with mounting clamps.................................................................................33
3.2.4 Mounting with latch fasteners ......................................................................................................34
3.3 Connecting the device .................................................................................................................35
3.3.1 Overview ......................................................................................................................................35
3.3.2 Notes on connection ....................................................................................................................36
3.3.3 Connecting the protective earth...................................................................................................37
3.3.4 Connecting the power supply.......................................................................................................38
3.3.4.1 Connecting the DC power supply ................................................................................................38
3.3.4.2 Connecting an AC power supply..................................................................................................40
3.3.5 Connecting the device to a PC ....................................................................................................42
3.3.5.1 Standard version..........................................................................................................................42
3.3.5.2 Extended version .........................................................................................................................42
3.3.6 Connecting a USB device ............................................................................................................43
3.3.7 Securing the cables .....................................................................................................................44

Table of contents
Industrial Flat Panel IFP1500, IFP1900, IFP2200
6 Operating Instructions, 09/2012, A5E31298376-AA
4 Commissioning the device....................................................................................................................... 45
5 Operating the device................................................................................................................................ 47
5.1 Overview ..................................................................................................................................... 47
5.2 Operating the touch screen......................................................................................................... 48
5.3 Using the on-screen keyboard .................................................................................................... 49
5.4 Operating a Touch/Key device.................................................................................................... 50
6 IPC Wizard functions ............................................................................................................................... 53
6.1 Overview ..................................................................................................................................... 53
6.2 Calibrating the touch screen ....................................................................................................... 53
6.3 Standard calibration .................................................................................................................... 54
6.4 Extended calibration.................................................................................................................... 55
6.5 Extended Touch touch functionality............................................................................................ 56
7 Maintaining and servicing your device ..................................................................................................... 57
7.1 Cleaning the device..................................................................................................................... 57
7.2 Spare parts and repairs............................................................................................................... 58
7.3 Recycling and disposal ............................................................................................................... 58
8 Technical information............................................................................................................................... 59
8.1 Certificates and approvals........................................................................................................... 59
8.1.1 Australia, Class A........................................................................................................................ 61
8.1.2 Korea........................................................................................................................................... 62
8.2 ESD guideline ............................................................................................................................. 62
8.3 Dimension drawings.................................................................................................................... 65
8.3.1 Dimension drawing of the IFP1500 Monitor and Touch.............................................................. 65
8.3.2 Dimension drawing of the IFP1900 Monitor and Touch.............................................................. 66
8.3.3 Dimension drawing of the IFP2200 Monitor and Touch.............................................................. 67
8.3.4 Dimension drawing of the IFP1500 Touch/Key........................................................................... 68
8.3.5 Dimensions for labeling strips ..................................................................................................... 69
8.4 Rating plate ................................................................................................................................. 70
8.5 Technical specifications .............................................................................................................. 70
8.5.1 General technical specifications ................................................................................................. 70
8.5.2 Ambient conditions...................................................................................................................... 72
8.5.2.1 Transport and storage conditions ............................................................................................... 72
8.5.2.2 Operating conditions ................................................................................................................... 73
8.5.2.3 Information on insulation tests, protection class and degree of protection................................. 75
8.6 Interface description.................................................................................................................... 75
8.6.1 24 V DC Power Supply ............................................................................................................... 75
8.6.2 DVI-D interface............................................................................................................................ 76
8.6.3 DisplayPort.................................................................................................................................. 77
8.6.4 USB interface, Type B................................................................................................................. 78
8.6.5 USB hub, Type A ........................................................................................................................ 78

Table of contents
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 7
A Technical Support.................................................................................................................................... 79
A.1 Service and support.....................................................................................................................79
B List of abbreviations................................................................................................................................. 81
Glossary .................................................................................................................................................. 83
Index........................................................................................................................................................ 85

Table of contents
Industrial Flat Panel IFP1500, IFP1900, IFP2200
8 Operating Instructions, 09/2012, A5E31298376-AA

Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 9
Overview 1
1.1 Product description
SIMATIC Industrial Flat Panels are LCD monitors suitable for industrial use with a brilliant
TFT display which can be connected to all SIMATIC IPCs as well as almost all generally
available PCs.
Features of SIMATIC Industrial Flat Panels
● Rugged aluminum front
● Brilliant TFT display with a wide reading angle;
TFT display in sizes 15", 19" and 22"
● Available as monitor or touch panel
● Can be placed up to 5 m from the IPC
● DVI-D and DisplayPort V1.1 interface
● Multi-monitoring support
● Backlighting can be dimmed via software
● 24 V DC power supply
● Degree of protection IP65/front face only, type 4X/type 12 (indoor use only) in installed
state
● Up to 16 million colors

Overview
1.2 Scope of delivery
Industrial Flat Panel IFP1500, IFP1900, IFP2200
10 Operating Instructions, 09/2012, A5E31298376-AA
Additional features of the Extended versions
● Up to 30 m away from PC possible via DVI
● Power supply: 24 V DC and 100-240 V AC
● 2 USB ports
● Also available as touch/key version with front USB interface
1.2 Scope of delivery
The scope of delivery includes the following components:
Name Figure Number
Industrial Flat Panel 1
Installation instructions
(Quick Install Guide)
1
12 "Mounting clamps and power
supply plugs" accessory kit
1
DVI connecting cable
2 m in length, for commissioning
1
USB connecting cable, 2 m 1 1
"Connecting cables" accessory kit
Power supply cable 230 V AC 2 1
"Documentation and Drivers" CD 1
1 Not for monitor standard device
2 with Extended devices only

Overview
1.3 Construction of the devices
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 11
1.3 Construction of the devices
1.3.1 IFP1500, IFP1900, IFP2200 Touch
This section describes the structure of the monitor and touch devices, using the IFP1500
Touch as an example.
Front view and side view



① Display/touch screen
② Recesses for mounting clamps
③ Mounting seal

Overview
1.3 Construction of the devices
Industrial Flat Panel IFP1500, IFP1900, IFP2200
12 Operating Instructions, 09/2012, A5E31298376-AA
Rear view




① Rating plate
② Interface name
③ Protective conductor connection
④ Retaining elements for strain relief of the connecting cables

Overview
1.3 Construction of the devices
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 13
1.3.2 IFP1500 Touch/Key
Front view





① Display and function keys with LED
② Alphanumeric keys
③ Control keys
④ Cursor keys
⑤ USB port

Overview
1.3 Construction of the devices
Industrial Flat Panel IFP1500, IFP1900, IFP2200
14 Operating Instructions, 09/2012, A5E31298376-AA
1.3.3 Interfaces
1.3.3.1 Standard versions
   
0RQLWRU6WDQGDUG
7RXFK6WDQGDUG
① X80 connector for 24 V DC power supply
② X71 DVI-D interface
③ X70 DisplayPort interface
④ X60 USB Type B
1.3.3.2 Extended versions
      
0RQLWRU([WHQGHG7RXFK([WHQGHG
7RXFK.H\([WHQGHG
① Connection for 100 to 240 V AC power
supply
⑤ X61/X62 USB Type A
② X80 connector for 24 V DC power supply ⑥ X63 USB link interface
③ X71 DVI-D interface ⑦ X60 USB Type B
④ X70 DisplayPort interface

Overview
1.4 Accessories
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 15
1.4 Accessories
This section contains the number of accessories available at the time of publication of the
operating instructions. You will find additional accessories on the Internet at:
● Industry Mall (http://mall.automation.siemens.com)
● Expansion components and accessories (http://www.automation.siemens.com/
mcms/pc-based-automation/en/industrial-pc/expansion_components_accessories)
All Industrial Flat Panels
Name Specification Order number
3 m long 6AV7860-0BH30-0AA0 DVI line
5 m long 6AV7860-0BH50-0AA0
3 m long 6AV7860-0DH30-0AA0 DisplayPort line
5 m long 6AV7860-0DH50-0AA0
3 m long 6AV7860-0CH30-0AA0 USB line
5 m long 6AV7860-0CH50-0AA0
15" 6AV2124-6QJ00-0AX0
19" 6AV2124-6UJ00-0AX0
Protective foil for the touch screen
22" 6AV2124-6XJ00-0AX0
Service pack - mounting clamps 20 pieces 6AV6671-8XK00-0AX3
Service pack - latch fasteners 2 x 8 latch fasteners 6AV7672-1JC00-0AA0
Touch pen for all touch versions 6AV7672-1JB00-0AA0
Extended version
Name Specification Order number
10 m long 6AV7860-1EX21-0AA1
15 m long 6AV7860-1EX21-5AA1
20 m long 6AV7860-1EX22-0AA1
Set of cables (DVI/USB line)
30 m long 6AV7860-1EX23-0AA1
Touch/Key Extended version
Name Order number
Film for labeling the function keys
(slide-in labels)
Print templates for the slide-in labels
are available on the "Documentation
and Drivers" CD/DVD.
6AV7672-0DA00-0AA0

Overview
1.4 Accessories
Industrial Flat Panel IFP1500, IFP1900, IFP2200
16 Operating Instructions, 09/2012, A5E31298376-AA

Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 17
Safety information 2
2.1 General safety instructions
Open equipment and the Machinery Directive
WARNING
The device constitutes open equipment
The device constitutes open equipment. This means that the device may only be installed
in enclosures or cabinets which provide front access for operating the device.
Access to the enclosure or cabinet in which the device is installed should only be possible
by means of a key or tool and for trained and authorized personnel.
Electrocution risk when control cabinet is open
When you open the control cabinet, there may be a dangerous voltage at certain areas or
components.
Touching these areas or components can cause electrocution.
Always disconnect the cabinet from the mains before opening it.
The device may only be used in machines which comply with the Machinery Directive
The Machinery Directive specifies precautions to be taken when commissioning and
operating machinery within the European Economic Area.
Failure to follow these precautions is a breach of the Machinery Directive. Such failure may
also cause personal injury and damage depending on the machine operated.
The machine in which the HMI device is to be operated must conform to Directive
2006/42/EC.
Hazardous areas
The following warning applies when operating the device in hazardous areas.
WARNING
Explosion Hazard
Do not disconnect while circuit is live unless area is known to be non-hazardous.
Substitution of components may impair suitability for Class I, Division 2 or Zone 2.

Safety information
2.2 Security information
Industrial Flat Panel IFP1500, IFP1900, IFP2200
18 Operating Instructions, 09/2012, A5E31298376-AA
High frequency radiation
NOTICE
Unwanted operating states
High-frequency radiation, for example from cellular phones, interferes with device functions
and can cause device malfunction.
This causes injury and damages the system.
Avoid high-frequency radiation:
Remove the sources of radiation from the vicinity of the device.
Switch off radiating devices.
Reduce the radio output of radiating devices.
Observe the information on electromagnetic compatibility (Page 62).
2.2 Security information
Siemens offers IT security mechanisms for its portfolio of automation and drive products in
order to support safe operation of the plant/machine. We recommend that you stay informed
about the IT security developments for your products. For information on this topic, refer to:
Industry Online Support (http://www.siemens.de/automation/csi_en_WW): You can register
for a product-specific newsletter here.
For the safe operation of a plant/machine, however, it is also necessary to integrate the
automation components into an overall IT security concept for the entire plant/machine,
which corresponds to the state-of-the-art IT technology. You can find information on this
under: Industrial Security (http://www.siemens.com/industrialsecurity).
Products used from other manufacturers should also be taken into account here.

Safety information
2.3 Notes about usage
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 09/2012, A5E31298376-AA 19
2.3 Notes about usage
NOTICE
Device approved for indoor use only
The device may be damaged if operated outdoors.
Operate the device indoors only.
Industrial applications
The device is designed for industrial use. It conforms to the following standards:
● Requirements of the emission standard for industrial environments, EN 61000-6-4: 2007
● Requirements for interference immunity EN 61000-6-2: 2005
Use in residential areas
Note
Device not intended for use in residential area
The device is not suitable for use in residential areas. Operation of the device in residential
areas can affect radio or TV reception.
If the device is used in a residential area, you must take measures to achieve Limit Class B
conforming to EN 55011 for RF interference.
Suitable measures for achieving the degree of noise suppression for Limit Class B include,
for example:
● Installation of the device in grounded control cabinets
● Use of filters in electrical supply lines
Individual acceptance is required.

Safety information
2.3 Notes about usage
Industrial Flat Panel IFP1500, IFP1900, IFP2200
20 Operating Instructions, 09/2012, A5E31298376-AA
Risk analysis and measures
WARNING
Hazards emanating from unprotected machines or plants
The results of a risk analysis can reveal any hazards emanating from unprotected
machinery. Such hazards may pose a risk of personal injury.
You can prevent personal injury caused by hazards as specified in the risk analysis by
taking the following measures:
Installing additional protective devices on machinery and plants. In particular, it must
also be ensured that the programming, configuration and wiring of all I/Os used takes
place in accordance with the safety performance (SIL, PL or Cat.) identified by the
requisite risk analysis.
Use of the device in accordance with its intended purpose, which can be verified by
means of a system function test This test can detect programming, configuration and
wiring errors.
Documentation of the test results, which must be entered in the relevant safety reports if
required.
Environment
NOTICE
Ambient conditions and chemical resistance
Ambient conditions not suited for the device can adversely affect operation. Chemical
agents, such as detergents or operating material, can change the color, shape and
structure of the device surface The device may be damaged. This may lead to
malfunctions.
For this reason, the following precautionary measures should be taken:
Only operate the device in closed rooms. Failure to comply with these instructions will
render the warranty null and void.
Only operate the device in the ambient conditions specified in the technical
specifications.
Protect the device against dust, moisture and heat.
The device may not be used in harsh operating environments, such as areas subject to
acidic vapors or gases, without additional protective measures (e.g. a clean air supply).
Only use suitable detergents. Please refer to the instructions concerning chemical
resistance available on the Internet, see section Service and Support (Page 79), "After
Sales Information System for SIMATIC PC/PG".