Siemens Pointek CLS500 User manual

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4
■ Overview
Pointek CLS500 is an inverse frequency shift capacitance level
switch for detecting interfaces, solids, liquids, toxic, and
aggressive chemicals in critical conditions of high temperature
and pressure.
■ Benefits
•Patented Active-Shield technology so measurement is
unaffected by material buildup in active shield section
•2-wire loop powered with solid-state switch or 4 to 20/20 to
4mA output
•Simple push-button calibration and integrated local display
•Full function diagnostics
•HART communications for remote commissioning and
inspection
■ Application
Patented Active-Shield technology ensures that measurement is
unaffected by vapors, product deposits, dust and condensation.
The unique mechanical probe design coupled with a high
performance transmitter gives superior performance in a wide
range of level detection applications.
Pointek CLS500’s microprocessor-based electronics provide
one-point calibration, making setup possible without shutting
down your production process.
•Key Applications: foam or liquid/foam level, glycol
regenerators, high-pressure coalescers, LNG applications
■ Configuration
Pointek CLS500 installation, dimensions in mm (inch)
uild up of material in active shield area does not affect
switch operation.
Keep unit out of path of falling material, or protect probe from
falling material.
Installation
Install probe at least 50 (2) from tank wall.
50 (2)
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/67
Siemens FI 01 · 2014
4
■ Technical specifications
1)
When operation is in areas classified as hazardous, observe restrictions
according to relevant certificate.
See also Pressure/Temperature curves on page 4/74.
2)
Thermal isolator is used if process connection temperature exceeds 85 °C
(185 °F)
Input
Measuring range 0 ... 330 pF
Span Min. 1 pF
Output
Solid-state switch
• Output Galvanically isolated
• Protection Against reversed polarity
(bipolar)
• Max. switching voltage • 30 V DC
• 30 V peak AC
• Max. load current 82 mA
• Voltage drop < 1 V, typical at 50 mA
• Time delay
(pre or post switching)
1 ... 60 s
Current loop 4 ... 20 mA/20 ... 4 mA
Accuracy (transmitter)
Temperature stability 0.15 pF (0 pF) or < 0.25 %
(typical < 0.1 %) of actual
measurement value, whichever is
greater over the full temperature
range
Non-linearity and repeatability 0.1 % of full scale and actual
measurement respectively
Accuracy Deviation < 0.1 % of measured
value
Rated operating conditions
1)
Installation conditions
- Location Indoor/outdoor
Ambient conditions
• Ambient temperature (transmitter) -40 ... +85 °C (-40 ... +185 °F)
2)
• Installation category I
• Pollution degree 4
Medium conditions
• Relative dielectric constant H
r
Min. 1.5
• Process temperature Temperature ratings are pressure
dependent.
See Pressure/Temperature curves
on page 4/74.
- Standard (PFA) -50 ... +200 °C (-58 ... +392 °F)
- High temperature stainless steel
version with thermal isolator
-60 ... +400 °C (-76 ... +752 °F)
- Cryogenic version -200 ... +200 °C (-328 ... +392 °F)
Contact [email protected]
for details.
Process pressure Pressure rating of process seal is
temperature dependent.
See Pressure/Temperature curves
on page 4/74.
• Standard (PFA) -1 ... +150 bar g
(-14.6 ... +2 175 psi g)
• High temperature version (stain-
less steel)
-1 ... +35 bar g
(-14.6 ... +507.6 psi g)
Design
Material
• Wetted parts material
- Standard rod 316L stainless steel
• Probe isolation (rod) PFA
Probe diameter
• Standard rod version (PFA) 16 mm (0.63 inch)
• High temperature rod version
(stainless steel)
19 mm (0.75 inch)
Probe length
• Standard rod version (PFA) Max. 1 000 mm (39.4 inch) with
16 mm (0.63 inch) diameter
probe
• High temperature rod version
(stainless steel)
Max. measuring length 1 000 mm
(39.4 inch) with 19 mm (0.75 inch)
diameter probe
Process connection of probe
• Threaded mounting NPT [(Taper), ANSI/ASME
B1.20.1]
R [(BSPT), EN 10226/PT (JIS-T),
JIS B 0203]
G [(BSPP), EN ISO 228-1/
PF (JIS-P), JIS B 0202]
• Flange mounting ASME, EN 1092-1
Enclosure
• Material Aluminum, epoxy-coated (stain-
less steel option available.
Contact [email protected])
• Cable inlet 2 x ½" NPT
• Degree of protection Type 4X/NEMA4X/IP65, IP68
Power supply Max. 33 V DC
Features
Measurement current signaling NAMUR NE 43
Safety • Inputs/outputs fully galvanically
isolated
• Polarity-insensitive current loop
• Fully potted
• Integrated safety barrier
• Diagnostics with fault alarm when: Primary variable (PV) out of limits,
system failure in measurement
circuit, deviation between A/D
and D/A converter, check sum,
watch dog and self-checking
facility
• Function rotary switch Positions 0 ... 9, A ... F
• SMART communication Conforming to HART
Communication Foundation
(HCF)
Certificates and approvals
• General Purpose CE, CSA/FM, C-TICK
• Non incendive/Non sparking CSA/FM Class I, Div. 2, Groups A,
B, C, D T4
ATEX II 3G 2D EEx n A [ib] IIC T6
to T4 T100 °C
• Dust Ignition Proof CSA/FM Class II and III, Div. 1,
Groups E, F, G T4
ATEX II 1/2 GD EEx d [ia] T6 to T1
T100 °C
• Explosion Proof FM Class 1, Div. 1, Groups A, B,
C, D T4
ATEX II 1/2 GD EEx d [ia] IIC T6
to T1 T100 °C
• Marine Lloyds Register of Shipping,
Categories ENV1, ENV2, ENV3,
ENV5, Bureau Veritas
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/68 Siemens FI 01 · 2014
4
1)
When operation is in areas classified as hazardous, observe restrictions according to relevant certificate. See also Pressure/Temperature curves on page 4/74.
Pressure rating of process seal is temperature dependent. See Pressure/Temperature curves on page 4/74.
2)
Pressure rating of process seal is temperature dependent. See Pressure/Temperature curves on page 4/74 .
– Not available as standard
Pointek CLS500 probe version Standard HT Series
Process connection types Standard (PFA)
(7ML5601, 7ML5602, 7ML5603)
High Temperature
(Enamel or stainless steel) (7ML5604)
Threaded Available as standard –
Flange Available as standard Available as standard
Process connection materials
316L stainless steel Available as standard Available as standard
Probe insulation
None – HT stainless: available as standard
PFA Available as standard –
Length parameters
Max. rod length 1 000 mm (40 inch) 1 000 mm (40 inch)
Process condtitions
1)
Max. process pressure 150 bar g (2 175 psi g) Stainless steel:
2)
35 bar g (507 psi g)
Max. process temperature 200 °C (392 °F) 400 °C (752 °F)
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/69
Siemens FI 01 · 2014
4
Selection and Ordering data Article No.
Pointek CLS500, threaded
Inverse frequency shift capacitance level switch for
detecting interfaces, solids, liquids, toxic and
aggressive chemicals in critical conditions of
extreme temperature and pressure.
7ML5601-
7 7 7 7 7 -7 7 A 0
Electronic transmitter
No transmitter supplied 0
MSP 2002-1 (330 pF) 1
Process connection
¾" A
1" B
1¼" C
1½" D
2" E
Threaded connection and rating
NPT [(Taper), ANSI/ASME B1.20.1] A
R [(BSPT), EN 10226/PT (JIS-T) JIS B 0203] B
G [(BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202] D
Probe insulation/material of process connection
PFA insulation/316L stainless steel 1
Approvals
General Purpose: CE, CSA/FM, C-TICK 1
CSA/FM Class I, Div. 2, Groups A, B, C, D T4;
ATEX II 3GD 2D EEx nA [ib] IIC T6 to T4 T100 °C;
CSA/FM Class II and III Div. 1, Groups E, F, G T4
2
ATEX II 1/2 GD EEx d [ia] IIC T6 to T1 T100 °C 4
FM Class I, Div. 1, Groups A, B, C, D T4 6
Probe/electrode diameter
16 mm (0.63 inch) rigid rod, minimum insertion
length 200 mm (7.9 inch), maximum insertion
length 1 000 mm (39.4 inch)
1)
1)
Add Order code Y01 and Y02 in plain text:
"Insertion/active shield length
to mm"
1
Thermal isolator/remote version
Rigid thermal isolator [for process connection
temperature over 85 °C (185 °F)]
A
No thermal isolator B
Selection and Ordering data Order code
Further designs
Please add "-Z"to Article No. and specify Order
code(s).
Total insertion length: enter the total insertion length
in plain text description
Y01
Active Shield length - minimum length is 50 mm
Y02: to mm
1)
1)
See dimension drawings on page 4/74 for further explanation of Y02
Y02
Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]:
Measuring-point number/identification
(max. 27 characters) specify in plain text
Y15
Manufacturer's test certificate: M to DIN 55350,
Part 18 and to ISO 9000
C11
Inspection Certificate Type 3.1 per EN 10204 C12
Operating Instructions
Note: The Operating Instructions should be
ordered as a separate line on the order.
This device is shipped with the Siemens Milltronics
manual DVD containing the ATEX Quick Start and
manual library.
See page 4/73
Pointek Specials See page 4/82
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/70 Siemens FI 01 · 2014
4
Selection and Ordering data Article No.
Pointek CLS500, welded flange
Inverse frequency shift capacitance level switch for
detecting interfaces, solids, liquids, toxic and
aggressive chemicals in critical conditions of
extreme temperature and pressure.
7ML5602-
7 7 7 7 7 -7 7 A 0
Electronic transmitter
MSP 2002-1 (330 pF) 1
Process connection and pressure rating
Welded flange, 316L stainless steel, raised face
2" ASME, 150 lb A A
2" ASME, 300 lb A B
3" ASME, 150 lb B A
3" ASME, 300 lb
1)
1)
Custom shipping methods required. Contact factory for more details.
B B
4" ASME, 150 lb
1)
C A
4" ASME, 300 lb
1)
C B
6" ASME, 150 lb
1)
D A
6" ASME, 300 lb
1)
D B
Welded flange, 316L stainless steel,
Type A flat faced
DN 50 PN 16 E C
DN 50 PN 40 E D
DN 80 PN 16 F C
DN 80 PN 40 F D
DN 100 PN 16
1)
G C
DN 125 PN 16
1)
(Note: Flange bolting patterns and facings
dimensionally correspond to the applicable
ASME B16.5 or EN 1092-1 standard.)
H C
Probe insulation/material of process connection
PFA insulation/316L stainless steel 1
Approvals
General Purpose 1
CSA/FM Class I, Div. 2, Groups A, B, C, D T4;
ATEX II 3GD 2D EEx nA [ib] IIC T6 to T4 T100 °C;
CSA/FM Class II and III Div. 1, Groups E, F, G T4
2
ATEX II 1/2 GD EEx d [ia] IIC T6 to T1 T100 °C 4
FM Class I, Div. 1, Groups A, B, C, D T4 6
Probe/electrode diameter
16 mm (0.63 inch) rigid rod, min. length 200 mm
(7.9 inch), max. length 1 000 mm (39.4 inch)
1
Thermal isolator
Rigid thermal isolator
[for process temperature over 85 °C (185 °F)]
A
No thermal isolator B
Selection and Ordering data Order code
Further designs
Please add "-Z"to Article No. and specify Order
code(s).
Total insertion length: enter the total insertion length
in plain text description
Y01
Active Shield length - minimum length is 50 mm.
Y02: to mm
1)
1)
See dimensional drawings on page 4/74 for further explanation of Y02
Y02
Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]:
Measuring-point number/identification
(max. 27 characters) specify in plain text
Y15
Manufacturer's test certificate: M to DIN 55350,
Part 18 and to ISO 9000 C11
Inspection Certificate Type 3.1 per EN 10204 C12
Operating Instructions
Note: The Operating Instructions should be
ordered as a separate line on the order.
This device is shipped with the Siemens Milltronics
manual DVD containing the ATEX Quick Start and
manual library.
See page 4/73
Pointek Specials See page 4/82
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/71
Siemens FI 01 · 2014
4
Selection and Ordering data Article No.
Pointek CLS500, single piece flange
Inverse frequency shift capacitance level switch for
detecting interfaces, solids, liquids, toxic and
aggressive chemicals in critical conditions of
extreme temperature and pressure.
7ML5603-
7 7 7 7 7 -7 7 A 0
Electronic transmitter
MSP 2002-1 (330 pF) 1
Process connection and pressure rating
Single piece flange, 316L stainless steel,
raised face
2" ASME, 150 lb A A
2" ASME, 300 lb A B
3" ASME, 150 lb B A
3" ASME, 300 lb
1)
1)
Custom shipping methods required. Contact factory for more details
B B
4" ASME, 150 lb
1)
C A
4" ASME, 300 lb
1)
C B
6" ASME, 150 lb
1)
D A
6" ASME, 300 lb
1)
D B
Single piece flange, 316L stainless steel,
Type B1 raised faced
DN 50 PN 16 E C
DN 50 PN 25 E D
DN 80 PN 16 F C
DN 80 PN 25 F D
DN 100 PN 16
1)
G C
DN 100 PN 25
1)
G D
DN 125 PN 16
1)
H C
DN 125 PN 25
1)
H D
Probe insulation/material of process connection
PFA insulation/316L stainless steel 1
Approvals
General Purpose: CE, CSA/FM, C-TICK 1
CSA/FM Class I, Div. 2, Groups A, B, C, D T4;
ATEX II 3GD 2D EEx nA [ib] IIC T6 to T4 T100 °C;
CSA/FM Class II and III Div. 1, Groups E, F, G T4
2
ATEX II 1/2 GD EEx d [ia] IIC T6 to T1 T100 °C 4
FM Class I, Div. 1, Groups A, B, C, D T4 6
Probe/electrode diameter
16 mm (0.63 inch) rigid rod,
maximum length 1 000 mm (39.4 inch) (Y01)
1
Thermal isolator
Rigid thermal isolator [for process connection
temperature over 85 °C (185 °F)]
A
No thermal isolator B
Selection and Ordering data Order code
Further designs
Please add "-Z"to Article No. and specify Order
code(s).
Total insertion length: enter the total insertion length
in plain text description
Y01
Active Shield length - minimum length is 50 mm.
Y02: to mm
1)
1)
See dimensional drawings on page 4/74 for further explanation of Y02
Y02
Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]:
Measuring-point number/identification
(max. 27 characters) specify in plain text
Y15
Manufacturer's test certificate: M to DIN 55350,
Part 18 and to ISO 9000
C11
Inspection Certificate Type 3.1 per EN 10204 C12
Operating Instructions
Note: The Operating Instructions should be
ordered as a separate line on the order.
This device is shipped with the Siemens Milltronics
manual DVD containing the ATEX Quick Start and
manual library.
See page 4/73
Accessories See page 4/82
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/72 Siemens FI 01 · 2014
4
Selection and Ordering data Article No.
Pointek CLS500 High temperature
Inverse frequency shift capacitance level switch for
detecting interfaces, solids, liquids, toxic and
aggressive chemicals in critical conditions of
extreme temperature and pressure.
7ML5604-
7A7 7 7 -7 7 7 7
Electronic transmitter
MSP 2002-1 (330 pF) 1
Process connection and pressure rating
316L stainless steel, raised face
1)
2" ASME, 150 lb A 1
2" ASME, 300 lb A 2
2" ASME, 600 lb A 3
2" ASME, 900 lb A 4
3" ASME, 150 lb B 1
3" ASME, 300 lb
2)
B 2
3" ASME, 600 lb
2)
B 3
3" ASME, 900 lb
2)
B 4
4" ASME, 150 lb
2)
C 1
4" ASME, 300 lb
2)
C 2
4" ASME, 600 lb
2)
C 3
4" ASME, 900 lb
2)
C 4
6" ASME, 150 lb
2)
D 1
6" ASME, 300 lb
2)
D 2
6" ASME, 600 lb
2)
D 3
6" ASME, 900 lb
2)
D 4
316L stainless steel, Type B1 flat faced
DN 50 PN 16 E 1
DN 50 PN 25 E 2
DN 50 PN 40 E 3
DN 50 PN 63 E 4
DN 80 PN 16 F 1
DN 80 PN 25 F 2
DN 80 PN 40
2)
F 3
DN 80 PN 63
2)
F 4
DN 100 PN 16
2)
G 1
DN 100 PN 25
2)
G 2
DN 100 PN 40
2)
G 3
DN 100 PN 64
2)
G 4
DN 125 PN 16
2)
H 1
DN 125 PN 25
2)
H 2
DN 125 PN 40
2)
H 3
DN 125 PN 64
2)
(Note: Flange bolting patterns and facings
dimensionally correspond to the applicable
ASME B16.5 or EN 1092-1 standard.)
H 4
Probe material of process connection
No insulation/316L stainless steel
3)4)
1
Stilling well
No stilling well 0
Approvals
General Purpose A
CSA/FM Class I, Div. 2, Groups A, B, C, D T4;
ATEX II 3GD 2D EEx nA [ib] IIC T6 to T4 T100 °C;
CSA/FM Class II and III Div. 1, Groups E, F, G T4
B
ATEX II 1/2 GD EEx d [ia] IIC T6 to T1 T100 °C D
FM Class I, Div. 1, Groups A, B, C, D T4 F
Probe/electrode diameter
Maximum length 1 000 mm (39.37 inch)
4)
A
Thermal isolator
Rigid thermal isolator [for process connection
temperature over 85 °C (185 °F)]
1
1)
Welded flange for no insulation option only
2)
Custom shipping methods required
3)
Non-conductive material only, stainless steel non-insulated probe diameter
19 mm (0.75 inch)
4)
Add Order code Y01 and Y02 in plain text:
"Insertion/active shield length
to mm"
Minimum insertion length depends on probe version selected.
See dimensional drawings on page 4/74 for more details.
Selection and Ordering data Article No.
Pointek CLS500 High temperature
Inverse frequency shift capacitance level switch for
detecting interfaces, solids, liquids, toxic and
aggressive chemicals in critical conditions of
extreme temperature and pressure.
7ML5604-
7
A
7 7 7
-
7 7 7 7
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/73
Siemens FI 01 · 2014
4
Selection and Ordering data Order code
Further designs
Please add "-Z"to Article No. and specify Order
code(s).
Total insertion length: enter the total insertion length
in plain text description
Y01
Active Shield length - minimum length is 50 mm.
Y02: to mm
1)
1)
See dimensional drawings on page 4/74 for further explanation of Y02
Y02
Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]:
Measuring-point number/identification
(max. 27 characters) specify in plain text
Y15
Manufacturer's test certificate: M to DIN 55350,
Part 18 and to ISO 9000
C11
Inspection Certificate Type 3.1 per EN 10204 C12
Operating Instructions Article No.
English 7ML1998-5GG03
German 7ML1998-5GG32
French 7ML1998-5GG11
Dutch
Note: The Operating Instructions should be
ordered as a separate line on the order.
This device is shipped with the Siemens Milltronics
manual DVD containing the ATEX Quick Start and
Operating Instructions library.
7ML1998-5GG41
Quick Start manual, multi-language A5E32243995
This device is shipped with the Siemens Milltronics
manual DVD containing the ATEX Quick Start and
Operating Instructions library.
Accessories
General Purpose
1/2" NPT General Purpose Cable Entry IP68/IP69K
NEMA6, -40 ... -100 °C (-40 ... -212 °F), cable size
6 ... 12 mm (0.236 ... 0.472 inch)
7ML1830-1JA
M20x1.5 General Purpose Cable Entry IP68/IP69K
NEMA6, -40 ... -100 °C (-40 ... -212 °F), cable size
7 ... 12 mm (0.275 ... 0.472 inch)
7ML1830-1JC
Transmitter, MSP 2002-1, 330 PF 7ML1830-1JP
Hazardous Locations
1/2" NPT EMC rated Cable Gland: Dust Ignition Proof,
Flameproof Exd, and Increased Safety ATEX II 2 GD
ExtD A21 (Zone 1, Zone 2, Zone 21, Zone 22, and in
Gas Groups IIA,IIB and IIC) -60 ... +80 °C IP66, IP67,
IP68, NEMA4X, cable sizes 5.5 ... 12 mm
(0.216 ... 0.472 inch)
7ML1830-1JB
M20 EMC rated Cable Gland: Dust Ignition Proof,
Flameproof Exd, and Increased Safety ATEX II 2 GD
ExtD A21 (Zone 1, Zone 2, Zone 21, Zone 22 and in
Gas Groups IIA,IIB and IIC) -60 ... +80 °C IP66, IP67,
IP68, NEMA4X, cable sizes 5.5 ... 12 mm
(0.216 ... 0.472 inch)
7ML1830-1JD
Pointek Specials See page 4/82
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/74 Siemens FI 01 · 2014
4
■ Characteristic curves
Pointek CLS500 Process Pressure/Temperature derating curves (7ML5601)
xample:
Permitted operating pressure = 137 bar (1988 psi) at 75 °C
Permitted operating pressures P
Permitted operating temperature T
Pressure/temperature curve
CLS500 rod probes
Threaded process connections
(7ML5601)
Atmospheric
30 bar (435 psi)
20 bar (290 psi)
40 bar (580 psi)
50 bar (725 psi)
60 bar (870 psi)
70 bar (1.015 psi)
80 bar (1.160 psi)
90 bar (1.305 psi)
100 bar (1.450 psi)
110 bar (1.595 psi)
120 bar (1.740 psi)
130 bar (1.885 psi)
140 bar (2.030 psi)
150 bar (2.175 psi)
10 bar (145 psi)
-150 ºC
(-238 ºF)
-1 bar (-14.5 psi)
-100 ºC
(-148 ºF)
-50 ºC
(-58 ºF)
-29 ºC
(-20 ºF)
0 ºC
(32 ºF)
50 ºC
(122 ºF)
RT 100 ºC
(212 ºF)
150 ºC
(302 ºF)
200 ºC
(392 ºF)
250 ºC
(482 ºF)
300 ºC
(572 ºF)
350 ºC
(662 ºF)
400 ºC
(752 ºF)
-40 ºF
(-40 ºC)
700 ºF
(371 ºC)
600 ºF
(315 ºC)
500 ºF
(260 ºC)
400 ºF
(204 ºC)
300 ºF
(149 ºC)
200 ºF
(93 ºC)
100 ºF
(38 ºC)
14 ºF
(-10 ºC)
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/75
Siemens FI 01 · 2014
4
Pointek CLS500 Process Pressure/Temperature derating curves (7ML5602 and 7ML5603)
he curve denotes the minimum allowable flange class for the shaded area below.
1)
Permitted operating pressures P
Permitted operating temperature
Pressure/temperature curve
CLS500 rod probes
ASME flanged process connections
(7ML5602 and 7ML5603)
Atmospheric
30 bar (435 psi)
20 bar (290 psi)
40 bar (580 psi)
50 bar (725 psi)
60 bar (870 psi)
70 bar (1.015 psi)
80 bar (1.160 psi)
90 bar (1.305 psi)
100 bar (1.450 psi)
110 bar (1.595 psi)
120 bar (1.740 psi)
130 bar (1.885 psi)
140 bar (2.030 psi)
150 bar (2.175 psi)
10 bar (145 psi)
-150 ºC
(-238 ºF)
-1 bar (-14.5 psi)
-100 ºC
(-148 ºF)
-50 ºC
(-58 ºF)
-29 ºC
(-20 ºF)
0 ºC
(32 ºF)
50 ºC
(122 ºF)
R 100 ºC
(212 ºF)
150 ºC
(302 ºF)
200 ºC
(392 ºF)
250 ºC
(482 ºF)
300 ºC
(572 ºF)
350 ºC
(662 ºF)
400 ºC
(752 ºF)
-40 ºF
(-40 ºC)
700 ºF
(371 ºC)
600 ºF
(315 ºC)
500 ºF
(260 ºC)
400 ºF
(204 ºC)
300 ºF
(149 ºC)
200 ºF
(93 ºC)
100 ºF
(38 ºC)
14 ºF
(-10 ºC)
ASME 150 lb1)
ASME 300 lb1)
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/76 Siemens FI 01 · 2014
4
Pointek CLS500 Process Pressure/Temperature derating curves (7ML5602 and 7ML5603)
he curve denotes the minimum allowable flange class for the shaded area below.
1)
Permitted operating pressures P
Permitted operating temperature
Pressure/temperature curve
CLS500 rod probes
EN flanged process connections
(7ML5602 and 7ML5603)
Atmospheric
30 bar (435 psi)
20 bar (290 psi)
40 bar (580 psi)
50 bar (725 psi)
60 bar (870 psi)
70 bar (1.015 psi)
80 bar (1.160 psi)
90 bar (1.305 psi)
100 bar (1.450 psi)
110 bar (1.595 psi)
120 bar (1.740 psi)
130 bar (1.885 psi)
140 bar (2.030 psi)
150 bar (2.175 psi)
10 bar (145 psi)
-150 ºC
(-238 ºF)
-1 bar (-14.5 psi)
-100 ºC
(-148 ºF)
-50 ºC
(-58 ºF)
-29 ºC
(-20 ºF)
0 ºC
(32 ºF)
50 ºC
(122 ºF)
R 100 ºC
(212 ºF)
150 ºC
(302 ºF)
200 ºC
(392 ºF)
250 ºC
(482 ºF)
300 ºC
(572 ºF)
350 ºC
(662 ºF)
400 ºC
(752 ºF)
-40 ºF
(-40 ºC)
700 ºF
(371 ºC)
600 ºF
(315 ºC)
500 ºF
(260 ºC)
400 ºF
(204 ºC)
300 ºF
(149 ºC)
200 ºF
(93 ºC)
100 ºF
(38 ºC)
14 ºF
(-10 ºC)
PN 161)
PN 251)
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/77
Siemens FI 01 · 2014
4
Pointek CLS500 Process Pressure/Temperature derating curves (7ML5604)
he curve denotes the minimum allowable flange class for the shaded area below.
1)
Permitted operating pressures P
Permitted operating temperature
Pressure/temperature curve
CLS500 high temperature (no insulation)
ASME flanged process connections
(7ML5604)
Atmospheric
30 bar (435 psi)
20 bar (290 psi)
40 bar (580 psi)
50 bar (725 psi)
70 bar (1.015 psi)
80 bar (1.160 psi)
60 bar (870 psi)
90 bar (1.305 psi)
10 bar (145 psi)
-150 ºC
(-238 ºF)
-1 bar (-14.5 psi)
-100 ºC
(-148 ºF)
-50 ºC
(-58 ºF)
-29 ºC
(-20 ºF)
0 ºC
(32 ºF)
50 ºC
(122 ºF)
R 100 ºC
(212 ºF)
150 ºC
(302 ºF)
200 ºC
(392 ºF)
250 ºC
(482 ºF)
300 ºC
(572 ºF)
350 ºC
(662 ºF)
400 ºC
(752 ºF)
-40 ºF
(-40 ºC)
700 ºF
(371 ºC)
600 ºF
(315 ºC)
500 ºF
(260 ºC)
400 ºF
(204 ºC)
300 ºF
(149 ºC)
200 ºF
(93 ºC)
100 ºF
(38 ºC)
14 ºF
(-10 ºC)
ASME 150 lb1)
ASME 300 lb1)
ASME 600 lb1)
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/78 Siemens FI 01 · 2014
4
Pointek CLS500 Process Pressure/Temperature derating curves (7ML5604)
he curve denotes the minimum allowable flange class for the shaded area below.
1)
Permitted operating pressures P
Permitted operating temperature
Pressure/temperature curve
CLS500 high temperature (no insulation)
EN flanged process connections
(7ML5604)
Atmospheric
30 bar (435 psi)
20 bar (290 psi)
40 bar (580 psi)
10 bar (145 psi)
-150 ºC
(-238 ºF)
-1 bar (-14.5 psi)
-100 ºC
(-148 ºF)
-50 ºC
(-58 ºF)
-29 ºC
(-20 ºF)
0 ºC
(32 ºF)
50 ºC
(122 ºF)
R 100 ºC
(212 ºF)
150 ºC
(302 ºF)
200 ºC
(392 ºF)
250 ºC
(482 ºF)
300 ºC
(572 ºF)
350 ºC
(662 ºF)
400 ºC
(752 ºF)
-40 ºF
(-40 ºC)
700 ºF
(371 ºC)
600 ºF
(315 ºC)
500 ºF
(260 ºC)
400 ºF
(204 ºC)
300 ºF
(149 ºC)
200 ºF
(93 ºC)
100 ºF
(38 ºC)
14 ºF
(-10 ºC)
PN 251)
PN 401)
PN 161)
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/79
Siemens FI 01 · 2014
4
■ Dimensional drawings
Pointek CLS500 - Threaded Process Connections, dimensions in mm (inch)
With explosion-proof seal option
(all versions)
With thermal isolator option
(all versions)
hermal
isolator
Standard configuration
(7ML5601)
Standard rod version
Threaded (7ML5601)
min. = 200 (7.87) / max. = 1 000 (39.37)
Y01 (insertion length)
Measuring length
Inactive tip
PFA insulated
probe
ransmitter/
electronics
20 (0.79) 1/2" NP :
230 (9.1)
430 (16.9)
270 (10.6) 205 (8.1)
Y02
30 (1.18)
Ø16 (0.63)
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/80 Siemens FI 01 · 2014
4
Pointek CLS500 - Flanged Process Connections, dimensions in mm (inch)
Flange Class Facing thickness
Flange Facing (raised face)
With explosion-proof seal option
(all versions)
With thermal isolator option
(all versions)
hermal
isolator
Standard configuration
(7ML5602, 7ML5603)
Standard Rod version
Welded Flange (7ML5602)
Single Piece Flange (7ML5603)
min. = 200 (7.87)/max. = 1 000 (39.37)
Y01 (insertion length)
Measuring length1)
Inactive tip
PFA insulated
probe
ransmitter/
electronics
Stainless steel
probe
High temperature rod version
Welded Flange (7ML5604), Stainless steel rod4)
min. = 200 (7.87)/max. = 1 000 (39.37)
Y01 (insertion length)
Measuring
length2)
hermal
isolator
Notes:
1) Min. Y02 (active shield length) = 50 (1.96)
2) Min. Y02 (active shield length) = 105 (4.13)
3) Min. Y02 (active shield length) = 100 (3.94)
4) Non conductive materials only
Insertion length does not include any raised
face/gasket face dimension (see Flange
Facing able above)
½" NP :
230 (9.1)
430 (16.9)
270 (10.6 205 (8.1)
Y021)
30 (1.18)
Ø16 (0.63)
Ø19 (0.75)
Y022)
2 (0.08)
7 (0.28)
2 (0.08)
PN16/25/40/64
ASME 600/900
ASME 150/300
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS500
4/81
Siemens FI 01 · 2014
4
■ Schematics
Pointek CLS500 connections
ype:
Ser.:
Date:
Rev.:
ampering voids warranty
Measuring
signal
(mini-
coaxial
cable)
Instrument
system
ground
Ground lug
Protective
label
Solid state
switch relay
(any polarity)
4 ... 20 mA
current loop
connection
(any polarity)
Ground connection
point for instrument
system
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS Specials
4/82 Siemens FI 01 · 2014
4
■ Selection and ordering data
Pointek Specials
1)
Article No.
CLS100 Polycarbonate Lid and Gasket, FKM
Kit, Lid and gasket,
CLS100 enclosure version
A5E01163671
CLS100 Miscellaneous Parts
Custom length of cable is available only for
7ML5501-xxx1x and 7ML5501-xxx5x
2)
CLS200 Gasket (IP65), Synprene
Spare gasket, enclosure version
(IP65 versions only)
A5E01163672
CLS200 Gasket (IP68), Silicone
Spare gasket, enclosure version
(IP68 versions)
A5E01163673
CLS200 Blind Lid
Spare aluminum blind lid
(for standard versions only)
A5E01163674
CLS200 Lid with window
Spare aluminum lid with window A5E01163676
CLS200 Sensor Kit for cable units
Kit, Sensor for cable units, PPS, Standard, FKM A5E01163677
Kit, Sensor for cable units, PPS, Digital,
FKM
A5E01163678
Kit, Sensor for cable units, PPS, Standard,
FFKM
A5E01163679
Kit, Sensor for cable units, PPS, Digital,
FFKM
A5E01163680
Kit, Sensor for cable units, PVDF, Standard,
FKM
A5E01163681
Kit, Sensor for cable units, PVDF, Digital,
FKM
A5E01163682
Kit, Sensor for cable units, PVDF, Standard,
FFKM
A5E01163683
Kit, Sensor for cable units, PVDF, Digital,
FFKM
A5E01163684
CLS200 Mounting Bracket,
316L stainless steel
Spare mounting bracket A5E01163685
CLS200 PROFIBUS Connector (IP65)
Spare, PROFIBUS connector
(IP65 versions only)
A5E01163686
CLS200 Miscellaneous Parts
CLS200 with FFKM O-rings (any version)
2)
CLS200 Electronics
Test magnet, digital version 7ML1830-1JE
Amplifier/power supply kit, standard version A5E03251681
Amplifier/power supply, digital version 7ML1830-1JF
LCD display, digital version 7ML1830-1JK
CLS300 Cable Extensions,
316L stainless steel
Kit, stainless steel cable extension, 1 m,
adjustable by customer
A5E01163688
Kit, stainless steel cable extension, 3 m,
adjustable by customer
A5E01163689
Kit, stainless steel cable extension, 5 m,
adjustable by customer
A5E01163690
Kit, stainless steel cable extension, 10 m,
adjustable by customer
A5E01163691
Kit, stainless steel cable extension, 15 m,
adjustable by customer
A5E01163693
Kit, stainless steel cable extension, 20 m,
adjustable by customer
A5E01163695
Pointek Specials
1)
Article No.
© Siemens AG 2013

Level Measurement
Point level measurement — Capacitance switches
Pointek CLS Specials
4
1)
Special flange sizes and facings are available. Please contact
[email protected] for part number and pricing. Submit Application
Questionnaire found on page 4/11.
2)
Please contact [email protected] for part number and pricing.
3)
For General Purpose approvals only.
4)
To maintain approvals, qualified trained Siemens personnel
required for part replacement.
Please contact [email protected] for special requests.
CLS300 Cable Extensions,
316 stainless steel with PFA coating
Kit, PFA cable extension, 1 m,
adjustable by customer
A5E01163697
Kit, PFA cable extension, 3 m,
adjustable by customer
A5E01163698
Kit, PFA cable extension, 5 m,
adjustable by customer
A5E01163699
Kit, PFA cable extension, 10 m,
adjustable by customer
A5E01163700
Kit, PFA cable extension, 15 m,
adjustable by customer
A5E01163701
Kit, PFA cable extension, 20 m,
adjustable by customer
A5E01163702
CLS300 Rod Kits, 316L stainless steel
Kit, stainless steel rod 180 mm (7.09 inch) to
be used with CLS300 units only (with standard
active shield). Insertion length after installation
is 350 mm (13.78 inch).
A5E01163719
Kit, stainless steel rod 330 mm (12.99 inch) to
be used with CLS300 units only (with standard
active shield). Insertion length after installation
is 500 mm (19.69 inch).
A5E01163720
Kit, stainless steel rod 580 mm (22.83 inch) to
be used with CLS300 units only (with standard
active shield). Insertion length after installation
is 750 mm (29.53 inch).
A5E01163721
Kit, stainless steel rod 830 mm (32.68 inch) to
be used with CLS300 units only (with standard
active shield). Insertion length after installation
is 1 000 mm (39.37 inch).
A5E01163722
Kit, stainless steel rod 1 330 mm (52.36 inch) to
be used with CLS300 units only (with standard
active shield). Insertion length after installation
is 1 500 mm (59.06 inch).
2)
Kit, stainless steel rod 1 830 mm (72.05 inch) to
be used with CLS300 units only (with standard
active shield). Insertion length after installation
is 2 000 mm (78.74 inch).
2)
Kit, stainless steel rod customized length
up to 1 m
2)
Kit, stainless steel rod customized length
up to 2 m
2)
CLS300 Electronics Kits with drivers
(for rod or cable versions)
Kit, Electronics with driver, standard CLS300.
To be used in rod or cable versions with
length less than 5 m.
3)4)
A5E01163723
Kit, Electronics with driver, digital CLS300.
To be used in rod or cable versions with
length less than 5 m.
3)4)
A5E01163725
Pointek Specials
1)
Article No.
CLS300 Electronics Kits with drivers
(for cable versions)
Kit, Electronics with driver, standard CLS300.
To be used in cable versions with
length greater than 5 m.
3)4)
A5E01163724
Kit, Electronics with driver, digital CLS300.
To be used in cable versions with
length greater than 5 m.
3)4)
A5E01163726
CLS300 Electronics
Test magnet, digital version 7ML1830-1JE
Amplifier/power supply kit, standard version A5E03251683
Amplifier/power supply, digital version 7ML1830-1JF
LCD display, digital version 7ML1830-1JK
CLS300 Weight Kit, 316L stainless steel
Kit, Spare stainless steel weight. To be used in
any cable version of CLS300
A5E01163727
CLS500 Gasket (IP65), Silicone
Spare gasket, CLS500 enclosure version, IP65 A5E01163728
CLS500 Blind Lid
Spare CLS500 aluminum blind lid A5E01163729
CLS500 Electronics Kit
Transmitter, MSP 2002-1, 330 PF 7ML1830-1JP
Pointek Specials
1)
Article No.
© Siemens AG 2013