Siemens MammoReport Plus Technical specifications

MammoReportPlus
English
Print No.: SPB7-420.831.20.01.02 Doc. Gen. Date: 01/05
© Siemens AG 2005
The reproduction, transmission or
use of this document or its contents
is not permitted without express
written authority. Offenders will be
liable for damages. All rights,
including rights created by patent
grant or registration of a utility
model _or_design,_are_reserved.
The Maintenance Protocol
SPB7-420.832.20.01.02 is required for these
Instructions
SP
System Manual
Maintenance Instructions
System maintenance

MammoReport Plus SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions
Rev. 01 01/05 CSPS 24 Erlangen, Germany
0 - 2 Revision
Document revision level
The document corresponds to the version/revision level effective at the time of system
delivery. Revisions to hardcopy documentation are not automatically distributed.
Please contact your local Siemens office to order current revision levels.
Disclaimer
The installation and service of equipment described herein is to be performed by qualified
personnel who are employed by Siemens or one of its affiliates or who are otherwise
authorized by Siemens or one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated
with or authorized by Siemens or one of its affiliates are directed to contact one of the
local offices of Siemens or one of its affiliates before attempting installation or service pro-
cedures.
Copyright notice
The DICOM functionalities in the MammoReportPlus system are based on the libraries
from Merge Technologies Inc.
FSC Celsius R610 and Fujitsu Siemens 38B2 are trademarks of their respective owners.
Windows XP Professional is a trademark of Microsoft Corporation.
SIMOMED SMM 21201P and syngo are trademarks of Siemens AG.
Softcopy reading software by MeVis BreastCare,
copyright © 2001 - 2005 by MeVis BreastCare.
Chapter Page Revision
all all 01

Contents 0 - 1
Siemens Medical Solutions SPB7-420.831.20 Page 1 of 2 MammoReport Plus
Erlangen, Germany Rev. 01 01/05 CSPS 24
1 _______General information ____________________________________________ 1 - 1
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Documents required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Time required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Text emphasis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
Explanation of abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
2 _______Hardware maintenance __________________________________________ 2 - 1
Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
Keyboard and mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2
Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
3 _______Check of image quality __________________________________________ 3 - 1
4 _______Changes to previous version _____________________________________ 4 - 1
Page

0 - 2 Contents
MammoReport Plus SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions
Rev. 01 01/05 CSPS 24 Erlangen, Germany
Page

General information 1 - 1
Siemens Medical Solutions Register 8 SPB7-420.831.20 Page 1 of 2 MammoReport Plus
Erlangen, Germany Rev. 01 01/05 CSPS 24
1 General information
These instructions describe the maintenance of the MammoReportPlus system.
All maintenance should be carried out on a yearly basis.
All maintenance performed must be checked off in the MammoReportPlus Maintenance
Protocol (SPB7- 420.832.20...).
1.1 Safety Information
The product specific safety information contained in this document, as well as the general
safety information must be observed.
The general ESD guidelines must be observed. (Refer to document ARTD-001.709.01...)
1.2 Training
The training required is described in the document Field Service Strategy
(SPB7-420.890.10...).
1.3 Documents required
•Maintenance Protocol (SPB7- 420.832.20...)
•MammoReportPlus Quality Control Manual (SPB7-420.621.20 ...)
1.4 Time required
Approximately 2 - 2.5 hours for one CSE.

MammoReport Plus Register 8 SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions
Rev. 01 01/05 CSPS 24 Erlangen, Germany
1 - 2 General information
1.5 Text emphasis
1.6 Explanation of abbreviations
The work steps in this document that are identified by these abbreviations should be
checked off in the Maintenance Protocol (SPB7-420.832.20...).
DANGER indicates when there is an immediate danger that leads
to death or serious physical injury.
WARNING indicates a risk of danger that may lead to death or to
serious physical injury.
CAUTION used with the safety alert symbol indicates a risk of
danger that leads to slight or moderate physical injury and/or
damage to property.
NOTICE used without the safety alert symbol indicates a risk of
danger that if disregarded leads or may lead to a potential situa-
tion which may result in an undesirable result or state other than
death, physical injury or damage to property.
NOTE contains information provided with special emphasis to
facilitate proper use of the equipment or proper execution of a
procedure, i.e. hints, tips.
Abbreviation Explanation
SI Safety Inspection
SIE Safety Inspection Electrical Safety
SIM Safety Inspection Mechanical Safety
PM Preventive Maintenance
PMP Preventive Maintenance, Preventive Parts Exchange, External Inspec-
tion, etc.
PMA Preventive Maintenance Adjustments
PMF Preventive Maintenance Function, Operating Value Check
Q Quality Check
QIQ Quality Check Image
QSQ Quality Check System
SW Software Maintenance
DANGER
WARNING
CAUTION
NOTICE
NOTE

Hardware maintenance 2 - 1
Siemens Medical Solutions Register 8 SPB7-420.831.20 Page 1 of 2 MammoReport Plus
Erlangen, Germany Rev. 01 01/05 CSPS 24
2 Hardware maintenance
2.1 Computer
•Remove the computer access panel, refer to Fig. 1.
PM Check of fans
•Visually check that the two fans that are cooling the processors are working properly.
The air should flow from front to back.
•Visually check that the power supply fan works properly. The air should flow from front to
back.
•Listen to the noise of the fans. Does it sound ok?
•Shut down the operating system properly and turn off the computer and any external
devices.
•Disconnect the power supply cable.
High Voltage!
Life-threatening electric shock hazard exists.
Do not touch computer components until the power supply cable
has been disconnected.
The computer contains electrostatic highly sensitive components
requiring particular care in their handling.
Risk of damaging components.
Be sure to follow the ESD guidelines. When cleaning, make sure
that no cleaning liquid penetrates into the equipment.
Fig. 1 Remove the access panel.
WARNING
CAUTION

MammoReport Plus Register 8 SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions
Rev. 01 01/05 CSPS 24 Erlangen, Germany
2 - 2 Hardware maintenance
PM Fans - cleaning
•Clean dust from all fans.
PM Check internal cables and plugs
•Check that all internal cables are properly connected to the devices.
PM Cleaning
•If necessary, clean dust from the computer cabinet.
•Reinstall the computer access panel and connect the power supply cable.
2.2 Cables
PM Check that cables are not squeezed or broken
•Check that the cables are neither squeezed nor broken; if they are, they must be
replaced.
PM Check all external cable connections
•Check that all external cables are properly connected.
PM Safe cable run
•Check that all cables are placed in such a way that no one will trip over them.
2.3 Keyboard and mouse
PM Keyboard - cleaning
•Use a damp cloth to clean dust from the keyboard.
PM Mouse - operational check
•Check that the mouse is operational.
PM Mouse - cleaning
•Open the mouse and clean the rolls inside the housing.
•Clean the external surface of the mouse.
2.4 Monitors
PM Desktop placement
•Ensure that the two high resolution monitors are safely placed on the workstation table.
•Ensure that the service monitor is safely placed on a side table.
PM Cleaning
•Clean the housing of the two high resolution monitors and the service monitor with a
damp cloth.
•Wipe the glass with a cloth moistened with a lukewarm aqueous solution of mild
detergent.

Check of image quality 3 - 1
Siemens Medical Solutions Register 8 SPB7-420.831.20 Page 1 of 2 MammoReport Plus
Erlangen, Germany Rev. 01 01/05 CSPS 24
3 Check of image quality
QIQ Calibration of High resolution monitors
The two High resolution monitors must be calibrated every year.
•Perform calibration according to the MammoReportPlus System Manual Calibration of
Monitors (SPB7- 420.820.20...)
•Check calibration according to the MammoReportPlus Quality Control Manual (SPB7-
420.621.20 ...).

MammoReport Plus Register 8 SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions
Rev. 01 01/05 CSPS 24 Erlangen, Germany
3 - 2 Check of image quality
This page intentionally left blank.

Changes to previous version 4 - 1
Siemens Medical Solutions Register 8 SPB7-420.831.20 Page 1 of 2 MammoReport Plus
Erlangen, Germany Rev. 01 01/05 CSPS 24
4 Changes to previous version
Chapter Page Change
Initial version

MammoReport Plus Register 8 SPB7-420.831.20 Page 2 of 2 Siemens Medical Solutions
Rev. 01 01/05 CSPS 24 Erlangen, Germany
4 - 2 Changes to previous version
This page intentionally left blank.