Siemens easyPocket User manual

Life sounds brilliant.
www.siemens.com/hearing
easyPocket basic
easyPocket advanced
User Guide

2Content
Content
Your remote control 4
Overview 5
Display 6
Control buttons 8
Key lock switch 10
Programming connection 10
Batteries 11
Inserting batteries 11
Checking the battery status 13
Daily use 14
Adjusting the volume 14
Changing the hearing program 14
Turning on and off (mute) 16
Adjusting the tinnitus noiser level 18
Alarm clock 19
Setting the alarm clock 19
Ending the alarm 21
Turning the alarm clock off 22
Setup and service functions 23
Setting the time 23
Resetting volume and hearing program 25
Displaying contact data 26
Setting the language of the menu 26

3Content
Maintenance and care 27
Troubleshooting 28
Important information 29
Intended use 29
Explanation of symbols 29
Transport and storage conditions 29
Disposal information 30
Technical information 30
Conformance information 32
Important safety information 33
Personal safety 33
Product safety 36
Country-specic information 38

Your remote control4
Your hearing instruments are equipped with wireless
technology and can therefore be controlled by a remote
control.
Both easyPocket basic and easyPocket advanced
provide the same basic remote control functions for
listening and program change.
easyPocket advanced has additional comfort functions.
The operating distance of the remote control is
approximately 40 inches (1 meter).
uMake sure the distance between your remote control
and hearing instrument does not exceed the operating
distance.
CAUTION
Read this user guide thoroughly and completely
and follow the safety information in this document
to avoid damage or injury.
Your remote control

Your remote control 5
Overview
ૠ
ૠ
ૠ
➊ Display
➋ Key lock switch
➌ Programming
connection
➍ Control buttons
➎ Program change button
➏ Volume up/down buttons
More functions are available in the menu. To enter
or exit the menu, press the volume up button and
the volume down button simultaneously.

Your remote control6
Display
All actions initiated with the remote control are
immediately reflected on the display.
For example, if you press the
volume up button, the following icon
is shortly displayed.
The remote control does not receive
information from your hearing
instruments. All actions that you
initiate with the controls of your hearing instruments are
not reflected on the remote control’s display.
Display of easyPocket basic
૞
૟
➊ Indicates change of
hearing program and
volume
➋ Alarm clock is activated
➌ Batteries of the remote
control are low
➍ Function of control
buttons

Your remote control 7
Display of easyPocket advanced
➊ Indicates change of
volume
➋ Program name
➌ Program icon
➍ Program number
➎ Alarm clock is activated
➏ Batteries of the remote
control are low
➐ Function of
programmable
control buttons
Power save mode
If the remote control is not used for some time, the
display automatically turns black. The remote control is
then in its power save mode.
uPress any button to activate the display again.

Your remote control8
Control buttons
You can quickly access two
functions with the control
buttons on the right hand
side of the remote control.
The control buttons of the
easyPocket advanced
can be congured by your
Hearing Care Professional.
Small icons on the display
show the functions.
Basic functions
Turn hearing instruments on or off.
Reset to default volume and hearing program.

Your remote control 9
Advanced functions (for easyPocket advanced only)
Tinnitus noiser level up.
Tinnitus noiser level down.
Adjust treble.
Adjust bass.
All other icons:
Shortcut to select a preferred hearing program.
The available icons and hearing programs depend on
your personal setup.

Your remote control10
Key lock switch
uTo prevent any accidental operation while
the remote control is in pockets or bags,
move the key lock switch to lock position
(red color visible).
When the key lock is active, all
buttons on the remote control
are disabled. The following icon
is displayed.
Programming connection
This connection is only to
be used by your Hearing
Care Professional for
programming the remote
control.