Siemens miniTek User manual

miniTek
remote control • távirányító • telecomandă •
télécommande • Fernbedienung • miniTek
English
Magyar
Română
Français
Deutsch
ﻲﺑﺮﻋ

2
English 3
Magyar 3
Română 63
Français 93
Deutsch 123
ﻲﺑﺮﻋ 180

3
Content
EN
HU
RO
FR
DE
AR
Content
miniTek 4
Transmitter 6
Included in delivery 7
Intended use 8
General notes on safety 9
Basic functions 12
Bluetooth 16
Bluetooth compatible phones 18
Other Bluetooth compatible devices 20
Using the transmitter 21
Stereo socket 25
Using a loop system 26
Accessories 27
Maintenance and care 28
Disposal information 29
Technical information 30
Technical data - Power supply 32

miniTek
4
miniTek

miniTek
5
EN
HU
RO
FR
DE
AR
MiniTek is an automatic streamer, sending sound from
audio devices wirelessly to your hearing instruments. It is
a remote control that can be used to control your hearing
instruments and high tech gadgets and allows you to
enjoy brilliant sound in true stereo form.
① Telephone button
② Stand-by for hearing instruments; mute
③ miniTek on/off
④ Audio source button
⑤ Volume up / volume down
⑥ Program change button
⑦ 2.5 mm stereo socket
⑧ DAI port for FM receiver
⑨ Socket for power plug
⑩ Microphone openings
⑪ Slots for fixing the clip
⑫ Lanyard attachment
⑬ Power LED

Transmitter
6
① On/off switch
② Sound level
③ USB-socket for power plug
④ 2.5 mm stereo socket
⑤ LED
Transmitter

Included in delivery
7
EN
HU
RO
FR
DE
AR
miniTek with lanyard and
clip Transmitter (with adhesive tape for affixing
2 USB-power plugs with country specific adapters (one for
the remote control, one for the transmitter)
Cables:
■ 1.8 m audio cable with 3.5 mm stereo plug and a 2.5
mm stereo plug
■ 0.3 m audio cable with 3.5 mm stereo plug and a 2.5
mm stereo plug
Adapter set:
■ 2.5 mm stereo plug to 3.5 mm stereo socket
■ 6.3 mm stereo plug to 3.5 mm stereo socket
■ RCA (cinch) to 3.5 mm stereo socket
■ RCA (cinch) to SCART
Included in delivery

Intended use
8
This remote control is intended to operate hearing
instruments.
Read and follow the instructions of this user guide to
avoid injuries or damage to the remote control.
Symbols:
Be aware of information marked with the warning symbol
WARNING, CAUTION or NOTICE!
WARNING points out a situation that could
lead to serious injuries, CAUTION indicates a
situation that could lead to minor and moder-
ate injuries.
NOTICE NOTICE indicates possible property damage.
Advice and tips on how to handle your device
better.
Instruction. Indicates that something has to be
done.
Indicates an option that not every device has.
Ask your Hearing Care Professional to check off
the relevant information.
Intended use

General notes on safety
9
EN
HU
RO
FR
DE
AR
NOTICE
The remote control is sensitive to extreme heat,
high humidity, strong magnetic fields (> 0.1T),
X-rays and mechanical stress.
Do not expose the remote control to extreme
temperature or high humidity.
Do not leave it in direct sunlight.
Do not immerse it in water.
Do not place your remote control in a micro-
wave oven.
NOTICE
Operating temperature: charge min. 0°C to max.
45°C; discharge min. -20°C to max. 60°C
Storage conditions: min. -20°C to max. 60°C; low
humidity
WARNING
Wireless systems may interfere with measuring
devices and electronic equipment.
Turn the remote control off when in hospitals or
airplanes.
Prior to use in conjunction with an electronic
implant or life supporting system, have the elec-
tromagnetic compatibility verified.
General notes on safety

General notes on safety
10
WARNING
Risk of interference with active implants – e.g.
pacemakers.
Consult a cardiologist before using accessories
with audio streaming functions together with
active implants.
The performance of the e2e wireless function may
be affected by electromagnetic interference – e.g.
from a computer monitor or fluorescent lamp
system.
Move away from the source of interference if
you experience difficulty.
In some countries restrictions for the usage of
wireless equipment exist.
Refer to local authorities for further informa-
tion.
In the event your hearing instruments can be
controlled by another person's remote control,
return hearing instruments and remote control
to your Hearing Care Professional.
WARNING
Hazard of explosion in gas-filled spaces!
Do not use your hearing instruments and re-
mote control in areas where there is danger of
explosions (e.g. mining).

General notes on safety
11
EN
HU
RO
FR
DE
AR
WARNING
Strangulation hazard when lanyard gets entangled
in moving mechanical parts of machines for ex-
ample.
Use only the delivered breakaway lanyard. It will
automatically detach when entangled.
Do not use lanyard for children under the age of
twelve.
WARNING
Choking hazard posed by small parts.
Keep batteries, small parts and remote control
out of children‘s reach.
If swallowed consult a physician or hospital im-
mediately.
This remote control is not designed for children
under the age of 36 month or mentally disabled
persons.
NOTICE
Please make sure that the power plug is easily ac-
cessible to remove it from power supply if neces-
sary.

Basic functions
12
Before first use
Charge miniTek before first use.
Charging
Connect miniTek with the USB-power plug to a power
supply.
Charging is complete when the power LED shines
green.
Power LED state
Battery full Battery nearly empty
miniTek off off off
miniTek on flashes green flashes red
miniTek off /
charging green constantly red constantly
miniTek on /
charging pulses green pulses red
Turning off
miniTek green / turns off slowly red / turns off slowly
Turning on
miniTek green for 3 seconds, then flashes green red for 3 seconds, then flashes red
If you turn on miniTek and the battery is empty, the LED
rapidly flashes red for 3 seconds, then turns off.
Basic functions

Basic functions
13
EN
HU
RO
FR
DE
AR
Wearing miniTek
Wear miniTek no further than 60 cm (24 inches) away
from the hearing instruments.
Use lanyard or clip to wear miniTek.
Turning the miniTek on/off
Press for about 3 seconds to turn miniTek on.
All LEDs shine for 3 seconds, then only the power LED
shines.
Press for about 3 seconds to turn miniTek off.
All LEDs shine for 3 seconds, then turn off slowly.
Turning the hearing instruments on/off
Press for about 3 seconds to turn your hearing
instruments off (stand-by).
Press for about 3 seconds to turn the hearing
instruments back on.

Basic functions
14
Changing the hearing program of your hearing instru-
ments
Press to change the hearing program.
Each time you press the program button, your hearing
instruments switch to the next program.
Each program change is confirmed by an acoustic
signal.
Changing the audio source (if connected)
Each time you press , your miniTek switches to the
next available audio source according to the following
overview:
FM transmitter (DAI)
Line-in (2.5 mm stereo socket)
First transmitter
Second transmitter (optional)
T-coil
Your Hearing Care Professional has to configure
your miniTek for your audio sources.

Basic functions
15
EN
HU
RO
FR
DE
AR
Changing the volume
Press to increase the volume.
Press to decrease the volume.
Fade out ambient noises (mute)
Press shortly to switch off the microphones of
your hearing instruments.
Press shortly to switch on again the micro-
phones of your hearing instruments.
With this function you can fade out distracting noise from
environment (e.g. while watching TV).

Bluetooth
16
Bluetooth is a wireless standard that provides a way to
connect wireless devices like cell phones, TV, headsets
and others.
The Bluetooth connection has a range of about 10
m (32 ft). Walls or objects between the devices can
shorten the distance.
The miniTek can be paired via Bluetooth with up
to two phones, two transmitters and a further
Bluetooth device (e.g. mp3 player or laptop) at the
same time.
Once a bluetooth device with control panel (e.g. iPhone,
iPod, BlackBerry, mp3 player, laptop) is paired with mini-
Tek, the connection to the miniTek will be established
automatically.
Pairing
Press for about 3 seconds to turn miniTek on.
Activate the Bluetooth function in your device.
Press on your miniTek for about 5 seconds to
prepare your miniTek for pairing.
Search in the menu of your device for other Bluetooth
devices.
Choose "RCU Connect" to pair miniTek and your device.
Enter the PIN "0000" if requested.
Bluetooth

Bluetooth
17
EN
HU
RO
FR
DE
AR
When pairing mode has been activated, all 3 buttons (on/
off button, telephone button and audio source button)
shine for 3 seconds, then flashes while the miniTek is
searching for a connection to an audio source. This can
take several seconds. Once a connection is established,
shines constantly for 3 seconds.
Refer to the user guide of your connected
device for more detailed information on how to
link devices via Bluetooth.

Bluetooth compatible phones
18
When you are making a call with a Bluetooth compatible
phone or cell phone, the miniTek allows you to use your
hearing instruments as a wireless headset.
Instead of using the telephone microphone, you speak
into miniTek and listen through your hearing instruments.
If paired with two phones, miniTek uses different
ring tones to distinguish incoming calls.
Pair the Bluetooth compatible phone with your miniTek
(refer to „Pairing“ in chapter „Bluetooth“).
Accepting an incoming call
Your hearing instruments change automatically to the
telephone program if your phone rings.
Press to accept the incoming call.
Speak into miniTek's microphone to talk.
Press to terminate the call.
Your hearing instruments switch back to the hearing
program you used before taking the call.
Bluetooth compatible phones

Bluetooth compatible phones
19
EN
HU
RO
FR
DE
AR
Rejecting an incoming call
Press for about 3 seconds to reject the incoming
call if supported by the phone.
Making a call
Dial the desired number on your phone.
If your phone does not transfer the connection to the
miniTek automatically, press once or twice(*) to
transfer the connection from your phone to the
miniTek.
Press once or twice(*) to transfer the connection
from the miniTek back to the phone.
(*) Test to see how your phone works with the miniTek.

Other Bluetooth compatible devices
20
Refer to the user guide of your connected
device for more detailed information on how to
link devices via Bluetooth.
Pair the Bluetooth compatible device (e.g. mp3 player,
laptop) with your miniTek (refer to "Pairing" in chapter
"Bluetooth").
Start the audio transmission on your Bluetooth com-
patible device.
You can now hear sound from your device through your
hearing instruments via Bluetooth.
Other Bluetooth compatible de-
vices