Siemens SIRIUS 3SB2 Instruction sheet

3SB2 pushbuttons and indicator lights
Industrial controls
SIRIUS
3SB2 pushbuttons and indicator
lights
Configuration Manual
05/2020
A5E43900767002A/RS-AA/001
Introduction
1
Safety instructions
2
Description
3
Mounting
4
Connecting
5
Technical specifications
6
Dimension drawings
7
Circuit diagrams
8

Siemens AG
Smart Infrastructure
Control Products
Werner
-von-Siemens-Str. 48-50
92224 AMBERG
GERMANY
A5E43900767002A/RS-AA/001
Ⓟ
05/2020 Subject to change
Copyright © Siemens AG 2020.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 3
Table of contents
1 Introduction ............................................................................................................................................. 5
1.1 Purpose of this documentation .................................................................................................5
1.2 Target group .............................................................................................................................5
1.3 Required knowledge .................................................................................................................5
1.4 Siemens Industry Online Support .............................................................................................6
1.5 Siemens Industry Online Support app ......................................................................................8
1.6 Support Request .......................................................................................................................8
2 Safety instructions................................................................................................................................... 9
2.1 Important notes .........................................................................................................................9
2.2 Before commencing work: Isolating the equipment from the supply system and
ensuring that it cannot be reconnected.....................................................................................9
2.3 Recycling and disposal ...........................................................................................................10
2.4 Security information ................................................................................................................10
3 Description............................................................................................................................................ 11
3.1 Application areas ....................................................................................................................11
3.2 Overview of 3SB2 pushbuttons ..............................................................................................12
3.3 Overview of 3SB2 indicator lights ...........................................................................................13
3.4 Overview of 3SB2 key-operated switches, selector switches and EMERGENCY STOP
mushroom pushbuttons ..........................................................................................................14
4 Mounting............................................................................................................................................... 15
4.1 Version with flat connector......................................................................................................15
4.2 Module mounting on a printed circuit board ...........................................................................16
4.3 Module mounting on a printed circuit board ...........................................................................18
4.4 Mounting the contact block on a front plate............................................................................19
4.5 Dismantling the contact block .................................................................................................20
4.6 Mounting a screw lens ............................................................................................................20
4.7 Mounting a button ...................................................................................................................21
4.8 Mounting with EMERGENCY STOP.......................................................................................21
4.9 Variants ...................................................................................................................................22
4.10 Lamp replacement ..................................................................................................................22

Table of contents
3SB2 pushbuttons and indicator lights
4Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
5 Connecting ........................................................................................................................................... 23
5.1 Grounding .............................................................................................................................. 23
5.2 Conductor cross-sections ...................................................................................................... 23
5.3 Connections ........................................................................................................................... 23
5.4 Solder pin connection ............................................................................................................ 23
6 Technical specifications ........................................................................................................................ 25
6.1 Technical data in Siemens Industry Online Support.............................................................. 25
6.2 Overview tables...................................................................................................................... 25
6.3 Technical specifications ......................................................................................................... 26
7 Dimension drawings.............................................................................................................................. 29
7.1 Actuating elements ................................................................................................................ 29
7.2 Contact blocks with flat connector ......................................................................................... 31
7.3 Contact blocks with solder pins for mounting on printed circuit boards................................. 31
8 Circuit diagrams.................................................................................................................................... 33
8.1 Operating travel diagrams...................................................................................................... 33
Index .................................................................................................................................................... 35

3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 5
Introduction
1
1.1 Purpose of this documentation
This manual describes the possible uses of SIRIUS command and signaling devices.
In order to provide users with the information they need to operate the system safely, this
manual provides a general explanation of operating principles, selection and installation of
pushbuttons and indicator lights.
1.2 Target group
This documentation contains information for the following target groups:
●Decision makers
●Technologists
●Project planning engineers
●Commissioning engineers
1.3 Required knowledge
A general knowledge of the following areas is needed in order to understand this
documentation:
●Low-voltage controls
●Digital circuit logic
●Automation systems
●AS-Interface
●Safety and security systems

Introduction
1.4 Siemens Industry Online Support
3SB2 pushbuttons and indicator lights
6Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
1.4 Siemens Industry Online Support
Information and service
At Siemens Industry Online Support you can obtain up-to-date information from our global
support database:
●Product support
●Application examples
●Forum
●mySupport
Link: Siemens Industry Online Support (https://support.industry.siemens.com/cs/de/en)
Product support
You can find information and comprehensive know-how covering all aspects of your product
here:
●FAQs
Answers to frequently asked questions
●Manuals/operating instructions
Read online or download, available as PDF or individually configurable.
●Certificates
Clearly sorted according to approving authority, type and country.
●Characteristics
For support in planning and configuring your system.
●Product announcements
The latest information and news concerning our products.
●Downloads
Here you will find updates, service packs, HSPs and much more for your product.
●Application examples
Function blocks, background and system descriptions, performance statements,
demonstration systems, and application examples, clearly explained and represented.
●Technical data
Technical product data for support in planning and implementing your project
Link: Product support (https://support.industry.siemens.com/cs/ww/en/ps)

Introduction
1.4 Siemens Industry Online Support
3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 7
mySupport
The following functions are available in your personal work area "mySupport":
●Support Request
Search for request number, product or subject
●My filters
With filters, you limit the content of the online support to different focal points.
●My favorites
With favorites you bookmark articles and products that you need frequently.
●My notifications
Your personal mailbox for exchanging information and managing your contacts. You can
compile your own individual newsletter in the "Notifications" section.
●My products
With product lists you can virtually map your control cabinet, your system or your entire
automation project.
●My documentation
Configure your individual documentation from different manuals.
●CAx data
Easy access to CAx data, e.g. 3D models, 2D dimension drawings, EPLAN macros,
device circuit diagrams
●My IBase registrations
Register your Siemens products, systems and software.

Introduction
1.5 Siemens Industry Online Support app
3SB2 pushbuttons and indicator lights
8Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
1.5 Siemens Industry Online Support app
Siemens Industry Online Support app
The Siemens Industry Online Support app provides you access to all the device-specific
information available on the Siemens Industry Online Support portal for a particular article
number, such as operating instructions, manuals, data sheets, FAQs etc.
The Siemens Industry Online Support app is available for Android and iOS:
Android
iOS
1.6 Support Request
Use the Support Request online form to send your question directly to Technical Support:
Support Request:
Internet (https://support.industry.siemens.com/My/ww/en/requests)

3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 9
Safety instructions
2
2.1 Important notes
The products described here have been developed to perform safety-related functions as
part of an overall system or machine. A complete safety-oriented system generally features
sensors, evaluation units, signaling units, and reliable shutdown concepts. It is the
responsibility of the manufacturer to ensure that a system or machine is functioning properly
as a whole. Siemens AG, its regional offices, and associated companies (hereinafter referred
to as "Siemens") cannot guarantee all the properties of an overall installation or machine that
has not been designed by Siemens. Nor can Siemens assume liability for recommendations
that appear or are implied in the following description. No new guarantee, warranty, or
liability claims beyond the scope of the Siemens general terms of supply are to be derived or
inferred from the following description.
2.2 Before commencing work: Isolating the equipment from the supply
system and ensuring that it cannot be reconnected.
DANGER
Hazardous voltage Will cause death or serious injury.
•Disconnect the system and all devices from the power supply before starting work.
•Secure against switching on again.
•Verify that the equipment is not live.
•Ground and short-circuit.
•Erect barriers around or cover adjacent live parts.
DANGER
Hazardous voltage Will cause death or serious injury.
Qualified Personnel.
The equipment / system may only be commissioned and operated by qualified personnel.
For the purpose of the safety information in these operating instructions, a "qualified
person" is someone who is authorized to energize, ground, and tag equipment, systems,
and circuits in accordance with established safety procedures.

Safety instructions
2.3 Recycling and disposal
3SB2 pushbuttons and indicator lights
10 Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
2.3 Recycling and disposal
For environmentally friendly recycling and disposal of your old device, please contact a
company certified for the disposal of old electrical and/or electronic devices and dispose of
the device in accordance with the regulations in your country.
2.4 Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity.
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customer’s exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/industrialsecurity.

3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 11
Description
3
3.1 Application areas
The 3SB2 pushbuttons and indicator lights are provided for front plate mounting and rear
connection with flat connectors. Contact blocks and lampholders with solder pins are also
available for use on PCBs. The 3SB2 series with a nominal diameter of 16 mm is ideal for
use in confined operating areas.
Note
Lamps and LED modules are designed solely for use with SIRIUS command and signaling
devices.
They are not suitable for use in domestic lighting systems.
Pushbuttons and indicator lights
Pushbuttons and indicator lights are used for switching, controlling and signaling of electrical
loads. Current operating states can be detected and switch positions can be indicated.
Pushbuttons and indicator lights are available in round or square design.
Application areas for pushbuttons and indicator lights:
●Control of machines
●Elevators
●Industrial control panels
●Rail / marine applications
●Power plants
●Mills / presses
Key-operated switches
Key-operated switches are used for operations that deserve special protection, e.g., for
prevention of improper operation.
Application areas for key-operated switches:
●Switching operations deserving special protection
●Reset of an EMERGENCY STOP
●Alarm systems
●Elevators
●Operation of dangerous machines (e.g., waste compactors)

Description
3.2 Overview of 3SB2 pushbuttons
3SB2 pushbuttons and indicator lights
12 Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
3.2 Overview of 3SB2 pushbuttons
Pushbuttons and illuminated pushbuttons, round plastic version, 16 mm in diameter
Pushbutton with flat button Illuminated pushbutton
with flat button
Pushbutton with raised
button
Illuminated pushbutton
with raised button
Article No.
Article No.
Article No.
Article No.
Black 3SB2000-0AB01
3SB2202-0AB01
3SB2203-0AB01
— 3SB2000-0LB01
3SB2202-0LB01
—
Red 3SB2000-0AC01
3SB2203-0AC01
3SB2001-0AC01
3SB2227-0AC01
3SB2207-0AC01
3SB2000-0LC01
3SB2203-0LC01
3SB2001-0LC01
3SB2227-0LC01
3SB2207-0LC01
Yellow 3SB2000-0AD01
3SB2202-0AD01
3SB2001-0AD01
3SB2226-0AD01
3SB2206-0AD01
3SB2000-0LD01
3SB2202-0LD01
3SB2001-0LD01
3SB2226-0LD01
3SB2206-0LD01
Green 3SB2000-0AE01
3SB2202-0AE01
3SB2001-0AE01
3SB2226-0AE01
3SB2206-0AE01
— 3SB2001-0LE01
3SB2226-0LE01
3SB2206-0LE01
Blue 3SB2000-0AF01
3SB2202-0AF01
3SB2001-0AF01
3SB2226-0AF01
3SB2206-0AF01
3SB2000-0LF01
3SB2202-0LF01
3SB2001-0LF01
3SB2226-0LF01
3SB2206-0LF01
White 3SB2000-0AG01
3SB2202-0AG01
— 3SB2000-0LG01 —
Clear 3SB2000-0AH01
3SB2202-0AH01
3SB2226-0AH01
3SB2206-0AH01
3SB2000-0LH01
3SB2202-0LH01
3SB2226-0LH01
3SB2206-0LH01

Description
3.3 Overview of 3SB2 indicator lights
3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 13
3.3 Overview of 3SB2 indicator lights
Indicator light, round plastic version, 16 mm in diameter
With concentric rings With smooth lens, for labeling with insert caps
Article No.
Article No.
Black
—
—
Red
3SB2001-6BC06
3SB2001-6CC06
Yellow
3SB2001-6BD06
3SB2001-6CD06
Green
3SB2001-6BE06
3SB2001-6CE06
Blue
3SB2001-6BF06
3SB2001-6CF06
White
3SB2001-6BG06
—
Clear
3SB2001-6BH06
3SB2001-6CH06

Description
3.4 Overview of 3SB2 key-operated switches, selector switches and EMERGENCY STOP mushroom
pushbuttons
3SB2 pushbuttons and indicator lights
14 Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
3.4 Overview of 3SB2 key-operated switches, selector switches and
EMERGENCY STOP mushroom pushbuttons
Key-operated switch
Selector switch with holder
EMERGENCY STOP mushroom
pushbutton
Diameter 16 mm, CES Black, not illuminated Illuminated Diameter 16 mm
Article No.
Article No.
Article No.
Article No.
3SB2000-4LA01 1)
3SB2000-4LB01 1)
3SB2202-4LA01 1)
3SB2202-4LB01 1)
3SB2000-2AB01 1)
3SB2202-2AB01 1)
3SB2000-2HB01 1)
Red 3SB2000-2AC01 1)
3SB2202-2AC01 1)
3SB2000-2HC01 1)
3SB2000-2BC01 2)
3SB2210-2DC01 3)
3SB2000-2DC01 3)
3SB2000-2EC01 4)
3SB2210-2EC01
4)
3SB2000-1AC01
3SB2203-1AC01
3SB2000-4MA01
2)
3SB2000-2BB01
2)
Green 3SB2000-2AE01 1)
3SB2202-2AE01 1)
3SB2000-2HE01 1)
3SB2000-2BE01 2)
3SB2210-2DE01 3)
3SB2000-2DE01 3)
3SB2000-2EE01 4)
3SB2210-2EE01
4)
3SB2000-4PB01 3)
3SB2000-4PC01 3)
3SB2000-4PA01 3)
3SB2210-4PB01 3)
3SB2210-4PA01 3)
3SB2210-2DB01 3)
3SB2000-2DB01 3)
3SB2000-2JB01 3)
3SB2000-4QA01 4)
3SB2210-4QA01 4)
3SB2000-2EB01 4)
3SB2210-2EB01 4)
White 3SB2000-2AG01 1)
3SB2202-2AG01 1)
3SB2000-2HG01 1)
3SB2210-2DG01 3)
3SB2000-2DG01 3)
3SB2000-2EG01 4)
3SB2210-2EG01
4)
1) 2 switch positions, latching
2) 2 switch positions, momentary-contact
3)
3 switch positions, latching
4)
3 switch positions, momentary-contact

3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 15
Mounting
4
4.1 Version with flat connector
Button, flat
Illuminated button, flat
Screw lens for indicator light
Insert label, for inscription
Insert cap, for inscription
Collar with extruded front ring
Collar for indicator light
Frame for square design
Wedge base lamp W2 x 4.6 d
Holder
Lamp socket with holder
Contact blocks (1 NO or 1 NC) for snapping onto holder or lamp socket

Mounting
4.2 Module mounting on a printed circuit board
3SB2 pushbuttons and indicator lights
16 Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
4.2 Module mounting on a printed circuit board
WARNING
Risk of serious injury.
No liability shall be accepted for any damage or injuries sustained as a result of improper
use or incorrect dismantling of the equipment (i.e. opening of components other than those
specifically designed to be opened by the user). Any improper handling of the equipment
can result in very serious physical injury.
Note
For use on
printed circuit boards, special contact blocks and lampholders for soldering into
the printed circuit board are available. For this purpose, these contact blocks/lampholders
are fitted with 0.8
mm x 0.8 mm solder pins of length 3.5 mm.
①
Actuating element
②
Front plate with minimum distances between actuators (see table below)
③
Spacing bolt
④
Holder
⑤
Lampholder or contact block
⑥
Printed circuit board

Mounting
4.2 Module mounting on a printed circuit board
3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 17
Minimum distances between actuators installed on front plate
a
b
Round version
19 mm
19 mm
Square version without labeling plate
21 mm
21 mm
Round and square version with labeling plate
21 mm
32 mm
For 2 selector switches with 3 switch positions, latching, side by side 21 mm 21 mm

Mounting
4.3 Module mounting on a printed circuit board
3SB2 pushbuttons and indicator lights
18 Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
4.3 Module mounting on a printed circuit board
Distances between spacing bolts
NOTICE
Risk of material damage.
Make sure that the printed circuit board is supported by spacing bolts in such a way that it
cannot sag or bend more than 0.1 mm when the command devices are actuated.
Printed circuit board thickness (b)
(epoxy resin glass fiber mat)
Max. distance (a) between spacing
bolts
Applies to
1.5 mm
80 mm
3SB2...
2.5 mm
150 mm
3SB2...
When using EMERGENCY STOP
mushroom pushbuttons
50 mm 3SB2.0.-1AC01
Note
The EMERGENCY STOP 3SB2000
-1AC... and 3SB2203-1AC... cannot be installed with
labeling
plate 3SB2900-0... or single frame 3SB2902-0...

Mounting
4.4 Mounting the contact block on a front plate
3SB2 pushbuttons and indicator lights
Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001 19
4.4 Mounting the contact block on a front plate
Mounting the entire module
1. Insert the actuator ①from the front through the opening and latch it with the holder ③
(contact block holder).
2. Use the two clamping screws ②to securely fasten the holder ③from the rear so that it
cannot vibrate or twist. The maximum screw torque is 0.4 Nm. You can use front plates
with a thickness of between 1 and 6 mm.
With a front plate thickness ④of > 3 mm, unscrew the clamping screws ②before
assembling the holder.
3. Insert the contact blocks ⑤into the locating groove at the side and snap them into
position. Any installation position is possible. One or two contact blocks can be mounted
on the holder.
4. Place the printed circuit board onto the solder pins of the contact blocks and lampholder
and solder it. After soldering, the devices must be flush with the board and perpendicular
to it.

Mounting
4.5 Dismantling the contact block
3SB2 pushbuttons and indicator lights
20 Configuration Manual, 05/2020, A5E43900767002A/RS-AA/001
4.5 Dismantling the contact block
Dismantling the complete module
1. Unsolder the printed circuit board.
2. Release the snap-in hooks of the contact blocks.
3. Remove the clamping screws ②from the holder ③.
4. Press the two arms of the dismantling tool ⑦(accessory 3SB2908-2AA) together ⑧and
insert it inside the leaf springs ⑨.
When the arms of the tool are released ⑩, the tool unlocks the latch so that the holder
③can be removed ⑪.
Note
If a command point is fitted with an indicator light or illuminated pushbutton, a lamp socket
with lampholder must be used instead of a holder. It is suitable for incandescent lamps or
LEDs with bases of type
W2 x 4.6d.
4.6 Mounting a screw lens
1. Place the screw lens 3SB2910-1.. on the holder.
2. Screw the lens into position using the assembly tool for buttons and lenses 3SB2908-
2AC.
3. Dismantle by carrying out the above steps in reverse order.