Sierra Wireless airlink es440 User manual

AirLink®ES440 Quick Start Guide
Page 1
STEP 2 Connect the Device
This guide provides instructions for quickly getting your Sierra Wireless®ES440 device congured and connected.
For more information refer to the:
• AirLink ES440 User Guide
• ALEOS™ Conguration User Guide
Both are available for download from the Sierra Wireless web site (www.sierrawireless.com/Support/Downloads).
1 Remove the four screws attaching the grey cover to the device’s body.
2 Slide the SIM card into the SIM card holder.
Note the location of the notched corner for correct alignment.
3 Replace the cover.
1 Connect the primary RF
antenna.
2 Connect the secondary RF
antenna.
4 Optional: Connect the RS‑232 port to the router console port using a null
modem converter / cable.
3a AceManager conguration:
Connect a Windows®computer to the
device with an Ethernet cable.
3b AirVantage conguration:
Connect the router port performing
ISP failover to the ES440 device’s
Ethernet port.
5 Connect the power cable to the device.
The device starts automatically, as indicated by the ashing LEDs.
STEP 1 Install the SIM Card
© 2013 Sierra Wireless All Rights Reserved PN 2400000 Rev. 1
NOTE: If you want to congure all your devices at the same time using AirVantage® Management Service, follow the instructions on page 2 to
register your devices before applying power.

AirLink®ES440 Quick Start Guide
AirLink Support
[e-mail]
AirLink Online Support Knowledgebase
www.sierrawireless.com/Support/SupportCenter
AirLink Software Downloads
www.sierrawireless.com/Support/Downloads Sierra Wireless Headquarters
13811 Wireless Way, Richmond, BC, Canada, V6V 3A4
Main Phone: [phone] (8am to 5pm Pacic time)
Sierra Wireless Contact Information
Page 2
AirVantage Management Service Sales
[e-mail]
AirLink Hardware Sales
[e-mail]
Connect to ACEmanager™
Connect to AirVantage Management Service
1 Using a web browser, log into your AirVantage Management Service account.
If you don’t have an AirVantage account, you can get a free trial account at https://airvantage.net.
2 If you have not already done so, register all your devices by following the instructions on the registration page.
3 Apply power to all your devices. AirVantage Management Service completes the registration at the next device
check in (default device check in is every 24 hours).
4 You can remotely congure and monitor all the devices at the same time with AirVantage Management Service.
© 2013 Sierra Wireless All Rights Reserved PN 2400000 Rev. 1
1 On the Windows computer connected to the ES440 device, enter http://192 .168.13 .31:9191 in the web browser.
The ACEmanager login screen appears.
NOTE: It may take the device 2 – 3 minutes to respond after the initial power up.
2The administrator user name, user, is entered by default. Enter the default password 12345.
3 The ACEmanager homepage appears. You can now congure each device with ACEmanager.
Refer to the ALEOS Conguration User Guide for detailed information.