Silver Cross Marie-Chantal Sleepover User manual

2
Warranty
All Silver Cross products are guaranteed
for a period of 36 months against faulty
workmanship, when the product is used
correctly according to the instruction
manual.
Garantie
Tous les produits Silver Cross sont garantis
pour une période de 36 mois contre tout
défaut de fabrication, si le produit est utilisé
conformément au manuel d’instructions.
Garantía
Todos los productos de Silver Cross incluyen
una garantía de 36 meses contra defectos
de fabricación, siempre que el producto se
utilice correctamente de acuerdo con el
manual de instrucciones.
Garanzia
Tutti i prodotti Silver Cross sono garantiti
per un periodo di 36 mesi contro difetti di
fabbricazione, purché il prodotto venga
utilizzato correttamente, in conformità al
manuale delle istruzioni.
Garantie
Für alle Produkte von Silver Cross besteht
für den Fall von Herstellungsmängeln eine
Garantie von 36 Monaten, sofern das Produkt
sachgemäß wie in der Bedienungsanleitung
angegeben gebraucht wurde.
Garanti
Alla Silver Cross-produkter har 36 månaders
garanti som gäller tillverkningsfel förutsatt
att produkten har använts korrekt i enlighet
med bruksanvisningen.
Гарантия
На всю продукцию Silver Cross
действует гарантия сроком 36 месяцев,
покрывающая случаи производственного
брака, при условии использования
изделия в соответствии с инструкциями.
保修
在依据说明书正确使用产品的情况下，所有
Silver Cross产品对工艺质量问题保修期为
36个月。
保養期
所有 Silver Cross 產品均可享有36個月保
養期，提供在按照指引說明書正確使用下的
工藝缺憾保養。

Silver Cross


3
silvercrossbaby.com
These instructions are important.
Read these instructions carefully before
use and keep them for future reference.
Your child’s safety may be aected if you
do not follow these instructions.
Your Sleepover 3-in-1 pushchair is a high
quality Silver Cross product. It meets
current safety standards and care and
regular light maintenance will ensure long
service. This pushchair is suitable from
birth up to 9kg with the carrycot and
from 6 months up to 25kg using the seat
unit. If somebody unfamiliar is using your
Sleepover 3-in-1 pushchair always ensure
that they read these instructions carefully
so that they understand how the product
works best. Always read all the instructions
provided carefully and remember, the
safety of your child is your responsibility.
WARNING: NEVER LEAVE YOUR
CHILD UNATTENDED.
Contents
Your Sleepover 3-in-1 includes the following
components, please check that you have
all the items before proceeding:
1.1 Carrycot
1.2 Seat Unit (including harness)
1.3 Hood
1.4 Apron
1.5 Carrycot Liner
1.6 Carrycot Mattress
1.7 Footmu
1.8 Changing Bag
1.9 Raincover
1.1
1.2
1.3
1.4
1.5
1.6 1.7
1.8
1.9
IMPORTANT: KEEP THESE
INSTRUCTIONS FOR
FUTURE REFERENCE

4
Using your Sleepover from Birth
with the Carrycot.
2.1 First erect the carrycot outer.
Lay the carrycot outer down with
frame upper most. Pull the top metal
bars into the locators on the internal
base of the carrycot, using the 2
webbing loops that are attached to
the metal bars.
A small groove in the locator holds
the frame in place.
2.2 Attach the carrycot liner to the
carrycot outer using the elasticated
top edge. Ensure the holes on the top
are located over the hood attachment
points.
Place the mattress into the base of
the carrycot.
2.3 Attach your hood to the carrycot by
inserting the clips into the slots on
the top edge of the carrycot. Fasten
the press studs on the hood to the
press studs on the carrycot - two at
the back and one at each side.
2.4 Fit the carrycot apron by tting it
round the carrycot and slide the
apron clips over the attachments
points, located on the inside of the
hood frame.
2.1
2.3
2.2
2.4

5
silvercrossbaby.com
Attaching the Carrycot to your
chassis.
3.1 Before attaching the carrycot to the
chassis, lower the hood to the lowest
position.
3.2 There are two zip pockets on either
side of the carrycot body. Remove the
handles from the pockets.
3.3 Lift the carrycot using the two handles
in one hand, position the carrycot so
the four locking catches on the base
are directly over the top of the support
bars on your chassis.
Using the other hand, press
downwards on each side of the
carrycot, listening for the two clicks.
Pull upwards with the handles to
ensure the carrycot is locked in place.
3.4 When the carrycot is attached, zip the
handles back into the side pockets.
The hood can now be raised.
WARNING: WHEN
ATTACHING, DETACHING
AND HAND CARRYING THE
SLEEPOVER CARRYCOT,
THE HOOD MUST BE IN THE
LOWEST POSITION.
WARNING: DO NOT LEAVE
FLEXIBLE CARRYING
HANDLES INSIDE THE
CARRYCOT.
3.1
3.2
3.3
3.4
‘CLICK’
‘CLICK’

6
Detaching the Carrycot from
your chassis.
4.1 Before detaching the carrycot from
the chassis, lower the hood to the
lowest position.
4.2 Remove the handles from the side
pockets and hold both handles
securely in one hand. With the other
hand, release the locking catches
using the two sliders on the each side
of the carrycot.
4.3 When both sides are released, lift the
carrycot upwards from the chassis.
WARNING: THE HANDLES
MUST BE STORED IN THE ZIP
POCKETS DURING USE.
WARNING: WHEN USED
WITHOUT THE CHASSIS.
ONLY USE ON A FIRM,
HORIZONTAL LEVEL AND
DRY SURFACE.
WARNING: THE HANDLES
MUST BE HELD SECURELY
WHEN ATTACHING AND
DETACHING THE SLEEPOVER
CARRYCOT FROM THE
CHASSIS. YOU MUST NOT
LET GO OF THE HANDLES
UNTIL THE CARRYCOT IS
EITHER SECURELY FASTENED
TO THE CHASSIS OR SAT
ON A FIRM, LEVEL AND DRY
SURFACE.
4.1
4.2
4.3

7
silvercrossbaby.com
Operating the Hood on the
Carrycot.
5.1 The Sleepover hood is multi
positional. Simply hold the front bar
and gently lift and lower.
5.2 To remove the hood, rstly, undo the 4
press studs from the Sleepover hood -
two at the back and one at each side.
Locate the hood release button at the
sides of the carrycot, just underneath
the hood attachment points. Press
the button to release the clip and lift
the hood upwards. Failure to press the
release button may result in damage
to your product.
5.3 Your Sleepover hood has a ventilation
panel underneath the rear panel and
a pop-out sun visor.
To use the ventilation panel, simply
lift up the panel at the back of the
hood to expose the ventilation mesh.
The pop-out sun visor can be pulled
out from underneath the hood and
pushed back when not needed.
5.1
5.2
5.3

8
6.1 Using your Sleepover from 6
months as a Pushchair.
Attaching the seat unit to the
chassis.
6.1 The Sleepover seat unit can be used in
forward facing and rearward facing
mode.
6.2 Position the seat unit so the four
locking catches on the base are
directly over the top of the support
bars on your chassis. Push the seat
unit downwards so that all four locks
‘click’ and engage. Give the seat unit
a gentle lift to check that all four
points are securely fastened.
WARNING: ALWAYS PICK
YOUR SLEEPOVER SEAT UNIT
UP BY THE HANDLES BELOW
THE SIDE ARMS, NEVER BY
THE HOOD OR BUMPER
BAR.
6.2

9
silvercrossbaby.com
7.1 Detaching the seat unit from the
chassis.
7.1 Place your hands in the elasticated
side pockets of the Sleepover seat
unit.
7.2 Gently grip the inner release catch,
and slide the release handle towards
the foot end of the Sleepover seat
unit. Squeeze to release the locking
catches. The will now lift clear of the
chassis.
7. 2

10
Using the harness.
8.1 To fasten the harness insert both
buckle clips into each side of the
buckle. Listen for the ‘click’
8.2 To release the harness press the
centre and pull apart. The shoulder
straps can be unhooked from the
buckle if required.
8.3 Your harness is fully adjustable by
moving the slides (A), to make tting
easy. ‘D’ rings are provided for tting
as separate harness if required (B).
Any additional harness must comply
with BS6684. Your child should always
be harnessed in and should never
be left unattended, even for short
periods of time.
8.4 To adjust the shoulder strap height
simply feed the strap back through
the button hole. Using your nger,
locate the shoulder strap and pull
through button hole which is at the
height required. (Repeat procedure
on opposite shoulder strap.
A
BB
A
8.1
8.3
A
BB
A
A
BB
A
8.2
8.4