Silver Cross Balmora User manual

请妥善保管本说明书以供日后参考
Balmoral
IMPORTANT: KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE

2
1.1
1.2
Contents
First check all your parts have been
supplied. Your Balmoral pram includes:
a) Body & Chassis
b) 2 x S-shaped metal bars
c) Handle
d) Hood
e) Apron
f) Tray (including 2 brackets)
g) Liner
h) Mattress with cover
i) After Care Kit
- Care instructions
- Brush
- Cloth
- Spanner
j) Certificate of Authenticity
k) 5 year guarantee application card
Fitting the handle
1.1 Attach the two S-shaped metal bars (C)
with the flat side against the body onto
the threaded bolts. Then attach the
sleeved nut ‘A’ onto the outer most bolt
(do not tighten until dome nut ‘B’ has
also been attached). Attach dome nut
‘B’ onto the inner most bolt. Do this on
both sides. Do not fully tighten until the
handle has been attached.
1.2 Attach the gripping handle onto the
two S-shaped metal bars; ensure the
washer is between the dome bolt and
the S-shaped metal bars. Tighten using
the spanner enclosed in your After Care
Kit. Now tighten all nuts until the handle
is secure.
A B
C

3
silvercrossbaby.com
2.2
2.1 The hood and apron
CAUTION: The child should be clear of
moving parts while making adjustments.
2.1 Lift hood into position and push down
on the levers on both sides of the hood
to secure in place.
2.2 Fit the apron around the contour of the
pram body and fasten the press studs
on either side of the pram. To hold
the storm flap in place, loop the metal
fastener over the nut on either side of
the hood.
Note: The apron can still be used in
conjunction with the liner.
Using the brake
3.1 To operate the brake, push down on the
lever with the black handle behind the
back right hand wheel.
3.2 To release the brake, lift the lever back
up.
Note: Always apply the brake when the
pram is stationary.
3.1

4
Using the liner and mattress
4.1 Ensure the hood is in the up position.
4.2 Secure the press studs which are half
way up the liner to the press studs that
are near the wing nut on both sides.
4.3 Secure the press studs that are attached
to the elastic on the liner to the press
studs that are built into the pram body
on top of the back ledge.
4.4 The mattress can be used with or
without the liner. If using the mattress
with the liner ensure the liner is in place
first.
4.5 Before inserting mattress ensure back
support is folded flat as shown in 6.4.
Insert mattress on top of back support.
Note: Ensure the head rest part of the
mattress is nearest the hood. For advice
on cleaning see the wash care label.
WARNING: Only use the mattress
provided by Silver Cross.
4.2
4.3

5
silvercrossbaby.com
Attaching the tray
5.1 To fit the tray push the brackets through
the underside of the tray and twist so
the white plastic T bar lies on top of the
tray. Each bracket should lie parallel to
the cross wire as shown in 6.1a.
5.2 Pull the black hooks on each end of
the bracket over the frame of the pram
and release the clips so that the tray is
secure.
Note: Do not place items, bags of
shopping for example, in the pram unit
as it will cause it to become unstable.
5.1
5.1a

6
Safety Notes
Your Balmoral Pram is a high quality Silver
Cross product. This product conforms to
applicable safety standards of BSEN1888:2012
and with correct use and maintenance should
give good service. If however you should have
any problems with your Balmoral Pram, please
contact your Silver Cross retailer who will take
appropriate action.
This pram is intended to be used from birth
up to 6 months.
If somebody unfamiliar is using your pram
always ensure that they read these instructions
carefully so that they understand how the
product works best.
Always read all the instructions provided
carefully and remember, the safety of your
child is your responsibility.
Storing back support
6.1 Please ensure that the back support is
stored flat as shown in fig. 6.1 - 6.4.
6.1
6.2
6.3
6.4

7
silvercrossbaby.com
Care and Maintenance
Please refer to the care guide instructions
included in your after care kit for information
on how to care for your Balmoral Pram.
Guarantee
All Silver Cross products are guaranteed
for a period of twelve months against faulty
workmanship. However please refer to the
extended guarantee details included with the
certificate of authenticity to register for your
free 5 year guarantee.
Please read these instructions carefully before
using your new Balmoral Pram and keep for
future reference.
Handmade in England.
Spares
A full range of spares for the entire Classic
Collection product range by Silver Cross is
available from www.heritage-prams.co.uk
WARNING:
Remove all packaging and
ties before use. Check your
Balmoral Pram regularly for
signs of damage during use and
discontinue use if found.
Keep away from fire.
Adult assembly required.
This product is not suitable for
running or skating.
Never leave your child
unattended.
Do not carry more than one child
in this pram. You should never
carry another child in a seat on
top of this pram.
Check that the pram body is
correctly engaged before use.
Ensure all locking devices are
engaged before use.
Do not let your child play with
this product.
The parking device should be
fully engaged when placing or
removing the child.
Any load attached to the handle
and/or on the side of the vehicle
will affect the stability of the
pram.
Accessories which are not
approved by Silver Cross shall not
be used.
Only replacement parts supplied/
recommended by Silver Cross
should be used.
Do not use if any part is broken,
torn, or missing.
Only use the mattress provided
by Silver Cross.
Caution: The child should be clear
of all moving parts while making
adjustments.

8
1.1
1.2
内容包括
首先检查所有配件是否已经提供，
你的Balmoral豪爵婴儿车包括：
a)婴儿车车架及车身
b)2组S型金属棒
c)手柄
d)顶蓬
e) 围蓬
f) 底盘（包括2个支架）
g)衬垫
h)配有床罩的床垫
i)保养工具盒
-保养指南
-刷子
-布
-扳手
j)原厂保证书
k)5年保修卡
A B
C
安装手柄
1.1将两个S形手柄配件平面的一
面安装于车身上的螺栓，然后
将螺帽”A”套在左边的螺栓
上（先不要拧紧直到圆顶的螺
帽”B”被拧上），把圆顶的
螺帽”B”固定在右边的螺钉
上。两边同时操作，不要完全
拧紧直到手柄被固定。
1.2.将2个S形手柄部件与婴儿车手柄
固定，确保垫圈在圆顶螺栓和S
形手柄部件之间，使用扳手拧紧
（该扳手在保养工具盒中），现
在可以拧紧所有螺帽直到手柄牢
固。

9
silvercrossbaby.com
2.2
2.1
3.1
顶蓬及围罩
注意：在进行调节时，孩子应当远
离调节中的零件
2..1将顶蓬抬起至合适的位置，然
后向下压顶蓬两侧的支架杆
2.2将围罩沿着婴儿车车身的周边
安装，在婴儿车的每一边收紧
子母贴。在顶蓬上放置防雨
罩，金属拉链位于顶蓬两侧的
螺帽上，将金属拉链沿着周边
拉起
注意：围罩也可以与衬垫同时使用
使用刹车
3.1.离开时按下黑色手柄后面的手
轮子操作刹车
3.2.放开刹车抬起手柄倒车

注意：在婴儿车静止不动时始终保
持刹车状态

10
4.2
4.3
使用床垫与衬垫
注意: 当靠背位于竖立或者平躺状
态时，床垫与衬垫f都可以使用
4.1 靠背顶端的孔位于上方位
置，这样就确保了衬垫位置
的上下正确。
4.2 确保衬垫中间位置的子母扣
与车架二侧蝶形螺母处的子
母扣贴在一起
4.3 确保衬垫松紧带上的子母扣
与婴儿车车身下部后背支架
的子母扣粘贴在一起
4.4 D型环可轻易通过衬垫的孔穿
过
4.5 床垫可与衬垫同时使用或独
立使用。如果床垫与衬垫同
时使用，请先安装衬垫。
4.6 在放入床垫前请按照如图6.4
所示收起放平小靠背
警告：只使用Silver Cross提供
床垫 卧兜内不应增加厚度超过
28MM 的棉垫。
注意：确保床垫的头枕部分是最靠
近车篷的一端
洗涤指导请参照水洗标