
■ 6 │ GB│IE│NI│CY SSME 250 A4
Operating the appliance
1) Place the base 5on a clean and level
surface.
2) Select the appropriate blender jug 1/9
for your smoothie:
–large blender jug 1, for a roughly
600 ml smoothie,
–small blender jug 9, for a roughly
300 ml smoothie.
3) Add the prepared ingredients to the blender
jug 1/9. Always add liquid ingredients first
and then the more solid ingredients such as
the fruit and/or crushed ice.
CAUTION! MATERIAL DAMAGE!
► Never fill the blender jug 1/9with ingre-
dients past the MAX marking! The appliance
will not be able to process the ingredients!
► Always add at least 100 ml of liquid into the
blender jug 1/9when making a smoothie.
4) Check whether the sealing ring is correctly
seated in the blade holder 4. Place the blade
holder 4on the blender jug 1/9so that the
blade 3extends into the blender jug 1/9,
and screw the blade holder 4firmly in place.
5) Now place the blade holder 4and the
attached blender jug 1/9onto the base 5
so that the arrow on the blade holder 4is
pointing to the symbol on the base 5.
CAUTION! MATERIAL DAMAGE!
► To turn the blade holder 4, always hold only
the blade holder 4and never try to turn the
blender jug 1/9! Otherwise, the blender
jug 1/9will detach and the ingredients will
spill out!
6) Then turn the blade holder 4so that the arrow
on the blade holder 4points to the symbol
on the base 5. The blade holder 4must
audibly click into place so that it sits firmly on
the base 5.
NOTE
► The appliance will only start if the blade
holder 4, the blender jug 1/9and the
base 5are assembled correctly.
7) Insert the plug into a mains power socket.
8) Set the speed switch 6to the required speed
and wait until the smoothie has reached the
desired consistency.
9) Set the speed switch 6to “0“.
NOTE
► If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little. When doing so, take hold of
the blade holder 4together with the blender
jug 1/9and the base 5so that they do
not come apart.
CAUTION! MATERIAL DAMAGE!
► Do not operate the appliance for longer than
1 minute in one session. The appliance will
overheat! After using for 1 minute, allow the
appliance to cool down completely.
CAUTION! MATERIAL DAMAGE!
► To turn the blade holder 4, always hold only
the blade holder 4and never try to turn the
blender jug 1/9! Otherwise, the blender
jug 1/9will detach and the ingredients will
spill out!
10) When the smoothie is ready, turn the blade
holder 4until the arrow on the blade holder 4
points to the symbol on the base 5and
remove the blade holder 4with the attached
blender jug 1/9.
11) Turn the blender jug 1/9over and unscrew
the blade holder 4.
12) Screw the lid 2/8onto the blender jug
1/9. You can drink the smoothie through the
drinking opening on the lid 2/8.
IB_351425_SSME250A4_GB-IE-NI-CY.indb 6 12.10.2020 14:39:44