Silvercrest SFW 250 B1 User manual

Mincer SFW 250 B1
4
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: SFW 250 B1 10/11-V2
IAN: 71981
Mincer
Operating instructions
Maszynka do
mielenia mięsa
Instrukcja obsługi
Mlýnek na maso
Návod k obsluze
Húsdaráló
Használati utasítás
Mesoreznica
Navodila za uporabo
Mlynček na mäso
Návod na obsluhu
Fleischwolf
Bedienungsanleitung
KITCHEN TOOLS
CV_71981_SFW250B1_LB4.indd 1-3CV_71981_SFW250B1_LB4.indd 1-3 14.12.2011 16:59:09 Uhr14.12.2011 16:59:09 Uhr

SFW 250 B1
09765
8
 
w
q
e
1
4
2
3
CV_71981_SFW250B1_LB4.indd 4-6CV_71981_SFW250B1_LB4.indd 4-6 14.12.2011 16:59:10 Uhr14.12.2011 16:59:10 Uhr

1
SFW 250 B1
GB
Index
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Information for these operating instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limited liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Items supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly /Disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembling the meat grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembling the sausage stuffer attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Assembling the kubbe attachment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Assembling the biscuit attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Processing meat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Processing sausage meat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the kubbe attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Making biscuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Non-functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning the motor block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning the accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Importer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Recipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Kubbe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Fresh Grill Sausages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Biscuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
IB_71981_SFW250B1_LB4.indb 1IB_71981_SFW250B1_LB4.indb 1 08.12.2011 13:47:34 Uhr08.12.2011 13:47:34 Uhr

2SFW 250 B1
GB Introduction
Information for these operating instructions
These operating instructions are a component of the Meat Grinder SFW 250 B1
(henceforth designated as the appliance) and they supply you with important
information about the intended use, safety and connection as well as operation
of the appliance.
These operating instructions must be constantly kept available close to the appli-
ance. They are to be read and applied by everyone assigned to operate, and
eliminate faults in, the appliance.
Retain these operating instructions and pass them on, together with the appliance,
to any future owners.
Copyright
This documentation is copyright protected.
Any copying or reproduction of it, including as extracts, as well as the reproduction
of images, also in an altered state, is only permitted with the written authorisation
of the manufacturer.
Limited liability
All technical information, data and instructions for the installation, connection
and operation contained in these operating instructions correspond to the latest
available at the time of printing and, to the best of our knowledge, take into ac-
count our previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to ob-
serve these instructions, improper use, incompetent repairs, making unauthorised
modifications or for using unapproved replacement parts.
Intended use
This appliance is intended for use in the processing of exclusively foodstuffs in
typically familial quantities in domestic households.
Mincing fresh meat,▯
Making sausages with natural or artificial sausage skin,▯
Making biscuits▯
This appliance is not intended for the processing of frozen foods or other hard
foodstuff
s, e.g. bones or nuts, or for use in commercial or industrial environments.
IB_71981_SFW250B1_LB4.indb 2IB_71981_SFW250B1_LB4.indb 2 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

3
SFW 250 B1
GB
Technical data
Voltage 220-240 V ∼, 50Hz
Power consumption 250 W
Protection class II /
C.O. Time 15 minutes
C.O. Time
The C.O. Time (Continuous Operation) details how long an appliance may be
used without the motor overheating and being damaged. After the appliance
has run for this period it must be switched off until the motor has cooled itself
down.
Items supplied
1Biscuit attachment with pattern strips
2Stodger
3Feeding tray
4Motor unit
5Meat grinder casing made of metal
6Transport screw
7Spring
8Cross blade
9Cutting discs for coarse and fine mincing
0Ring clamp
qSausage attachment
wSausage disc
eKubbe attachment
IB_71981_SFW250B1_LB4.indb 3IB_71981_SFW250B1_LB4.indb 3 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

4SFW 250 B1
GB Safety instructions
RISK OF ELECTRIC SHOCK
Ensure that the power cable does not become damaged. Protect the cable►
from heat and ensure that it cannot be trapped or clamped.
Arrange for damaged power cables and/or plugs to be replaced as soon►
as possible by a qualified specialist or by Customer Services.
Use the appliance only in dry indoor areas, not outdoors.►
Never immerse the motor block in water or any other liquid! If you
do, then you could receive a potentially fatal electric shock.
WARNING!
Never use the appliance for purposes other than those listed here. There►
will be a major risk of serious accidents should you try to neutralise the
safety fitments on the appliance!
WARNING! RISK OF INJURY!
Never put your hand into the openings of the appliance. Do not insert any►
objects of any kind into the openings – except for the appropriate stodger
and the foodstuff
to be processed. If you do, there will be a serious risk of
accidents!
Unplug the appliance from the power source before attaching or removing►
accessories.
Do not leave the appliance unsupervised when it is ready for use. To avoid►
it being switched on accidentally, always unplug the appliance after use or
during breaks.
Only use the original accessory parts for this appliance. Other accessories►
may not meet the safety requirements.
This appliance is not intended for use by individuals (including children)►
with restricted physical, physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person instruction in how the
appliance is to be used.
Children should be supervised to ensure that they do not play with the►
appliance.
Never operate the appliance in a no-load condition. This could irreparably►
damage the appliance.
IB_71981_SFW250B1_LB4.indb 4IB_71981_SFW250B1_LB4.indb 4 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

5
SFW 250 B1
GB
Assembly /Disassembly
CAUTION - PROPERTY DAMAGE!
All accessories are coated with a thin film of oil to protect them from corrosion.►
Therefore, carefully clean all of the parts before using the appliance for the
fi
rst time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic compo-
nents.
Assembling the meat grinder
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
Place the transport screw1) 6in the meat grinder casing 5.
Place the spring2) 7onto the transport screw 6.
Then fit the cross blade3) 8on so that the sharp side points away from the
spring 7:
WARNING! RISK OF INJURY!
The cross blade► 8is very sharp! Risk of injury!
CAUTION - PROPERTY DAMAGE!
The appliance will be damaged if the cross blade► 8is inserted the other
way around!
Select the appropriate cutting disc4) 8/sausage disc w. The cutting discs 8/
sausage disc wthat you do not immediately need can be stored in the small
compartment on the appliance (Fig. ).
To do this, slide the cover back to open the compartment. Place the two unused
cutting discs into it and then close the compartment with the cover.
IB_71981_SFW250B1_LB4.indb 5IB_71981_SFW250B1_LB4.indb 5 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

6SFW 250 B1
GB
Place your selected cutting disc5) 9into the meat grinder casing 5so that
the indentation on the cutting disc 9lies on the securing fitment in the meat
grinder casing 5.
After everything has been correctly assembled, screw the ring clamp6) 0
back on hand-tight.
The ready-assembled meat grinder casing7) 5is connected by a bayonet
connector to the motor block 4:
Insert the meat grinder casing– 5into the motor block 4such that the
arrow on the feeding shaft lies against the symbol on the motor
block 4. The locking button presses itself in. (Fig. ).
Lightly press the meat grinder casing– 5in and at the same time turn
the feeding shaft on the meat grinder casing 5into the middle position
(Fig. ) so that the arrow on the feeding shaft points to the symbol .
When the meat grinder casing 5engages, the locking button springs
out.
Finally, place the feed tray– 3on top of the feeding funnel.
To dismantle it, press the locking button and turn the feeding funnel to–
the right (Fig. ) . You can now pull the meat grinder casing 5out.
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for as-
sembling the appliance.
Remove the meat grinder casing1) 5as described under “Assembling the
meat grinder”.
Disassemble any attachments that might be fitted and clean the meat grinder2)
casing 5.
NOTICE
For the sausage stuffer attachment► q, the cross blade 8with the spring
7is not required! If need be, remove them both from the meat grinder
casing 5.
Coat all metal parts with cooking oil.3)
Take the sausage disc4) wfrom the small compartment of the appliance
(Fig. ).
Insert the sausage disc5) wso that the indentation on the sausage disc w
lies on the securing fitment in the meat grinder casing 5.
Then place the sausage stuffer attachment6) qbefore the sausage disc w.
Screw the ring clamp7) 0on hand-tight.
Assemble the meat grinder casing8) 5as described under “Assembling the
meat grinder”.
IB_71981_SFW250B1_LB4.indb 6IB_71981_SFW250B1_LB4.indb 6 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

7
SFW 250 B1
GB
Assembling the kubbe attachment
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
Remove the meat grinder casing1) 5as described under “Assembling the
meat grinder”.
Disassemble any attachments that might be fitted and clean the meat grinder2)
casing 5.
NOTICE
For the kubbe attachment► e, the cross blade 8with the spring 7is not
required! If need be, remove them both from the meat grinder casing 5.
Coat all metal parts with cooking oil.3)
Insert the two plastic parts of the kubbe attachment4) eso that the indentation
on the kubbe attachment elies on the securing fitment in the meat grinder
casing 5.
When everything has been attached correctly, screw the ring clamp5) 0back
on hand-tight.
Assemble the meat grinder casing6) 5as described under “Assembling the
meat grinder”.
Assembling the biscuit attachments
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
Remove the meat grinder casing1) 5as described under “Assembling the
meat grinder”.
Disassemble any attachments that might be fitted and clean the meat grinder2)
casing 5.
NOTICE
For the biscuit attachment► 1, the cross blade 8with the spring 7is not
required! If need be, remove them both from the meat grinder casing 5.
Coat all metal parts with cooking oil.3)
Pull the pattern strips4) 1away from the front of the biscuit attachment 1.
First place the plastic disc and then the metal disc of the biscuit attachment5) 1
into the meat grinder casing 5(see fold-out side). Insert the biscuit attach-
ment 1so that the indentation on the biscuit attachment 1lies on the
securing fitment in the meat grinder casing 5.
After everything has been correctly assembled, screw the ring clamp6) 0
back on hand-tight.
IB_71981_SFW250B1_LB4.indb 7IB_71981_SFW250B1_LB4.indb 7 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

8SFW 250 B1
GB
Replace the pattern strips7) 1back in to the front of the biscuit attachment 1.
Ensure that the grip on the pattern strips 1points away from the appliance.
If it does not, you will not be able to adjust the pattern, which is located
directly on the grip.
Assemble the meat grinder casing8) 5as described under “Assembling the
meat grinder”.
To dismantle it, you must first remove the pattern strips9) 1before you can
screw the ring clamp 0open and take the biscuit attachment 1back out.
Operation
RISK OF ELECTRIC SHOCK
NEVER open the housing of the motor block► 4– it does not contain any
user-serviceable elements. If the housing is opened, the warranty becomes
void. If the housing is opened, there is a risk of receiving a potentially fatal
electric shock.
CAUTION - PROPERTY DAMAGE!
Do not use the appliance for longer than 15 minutes continuously. To avoid►
an overheating of the appliance, after such a period switch it off and allow
it to cool down for ca. 30 minutes.
NEVER activate the buttons "I" or "► <", during a change of rotation direction,
if the appliance motor has not come to a complete stop. This could dam-
age the motor.
Operating the appliance
Once the appropriate attachments have been fixed:
Place the appliance where it will at all times be absolutely stable and under1)
no circumstances could it fall off of the work surface or in any way come into
contact with water (due to vibrations or becoming snagged in the power
cable). Vibration is unavoidable when it is working.
RISK OF ELECTRIC SHOCK
Never touch an appliance, which is plugged in or is operational when it►
happens, that falls or lands in water – or in the case of other emergencies!
First disconnect the appliance from the mains power source in all emergency
situations! Otherwise you run the risk of serious injury or loss of life!
Put the food which is to be processed in the feeding tray2) 3and place a
catchment container at the front under the exit opening.
IB_71981_SFW250B1_LB4.indb 8IB_71981_SFW250B1_LB4.indb 8 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

9
SFW 250 B1
GB
First press the button “0” to check that the appliance is still switched off.3)
Otherwise there is a risk that the appliance could unintentionally start
when the plug is inserted into the power socket.
Then insert the plug into a mains power socket.4)
Press the button “I” to start the appliance.5)
WARNING! RISK OF INJURY!
Push the foodstuff into the feeding shaft ONLY with the round stodger► 2–
NEVER with one’s fingers, forks, spoons or similar objects. That could lead
to physical injury and also damage the appliance.
CAUTION - PROPERTY DAMAGE!
Do not ever press so hard that the motor gets audibly slower. This could►
overburden the machine and damage it.
Processing meat
Use pieces of meat that fit easily into the feeding funnel. If necessary, cut the1)
meat to size beforehand. Check that the meat does not have any bones and
or tendons.
WARNING!
Minced meat is very prone to bacterial contamination. Therefore take care►
to maintain good hygiene when processing meat. If you do not, it may
cause serious health problems.
When you have read and understood all of the instructions on the topic2)
”Meat“, you can now use the appliance as described in the chapter
“Operating the appliance”.
Processing sausage meat
Pass meat through the meat grinder twice before using it as sausage stuffing.1)
To make sausage stuffing, add some chopped onions, spices and other2)
ingredients to the minced meat, as per your recipe, and knead the mixture
well. Refrigerate this for 30 minutes before processing it further.
Pull one end of the sausage skin (natural or artificial sausage skin) onto the3)
sausage stuffer attachment qand tie a knot in the other end. For 1 kg of the
filling, you will need approximately 1.60 m of sausage skin.
IB_71981_SFW250B1_LB4.indb 9IB_71981_SFW250B1_LB4.indb 9 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

10 SFW 250 B1
GB TIP!
Soak the natural sausage skin in lukewarm water for about 3 hours before
using it and wring it out before attaching it. This will make the natural sau-
sage skin more elastic. Natural sausage skins are available from butcher
suppliers close to slaughter houses or from your family butcher.
The sausage mixture will be pressed into the sausage skin by the sausage4)
stuffer attachment q. When it is long enough switch the appliance off, press
the sausage together at the ends and rotate it a couple of times along its
longitudinal axis.
TIP!
Sausage meat tends to expand when cooked or frozen. Therefore, to
prevent it from bursting it is best not to overstuff the sausage.
When you have read and understood all of the instructions on the topic5)
”Sausage”, you can now use the appliance as described in the chapter
“Operating the appliance”.
Using the kubbe attachment
With the kubbe attachment efoodstuffs can be processed to form hollow rolls
of meat or vegetables, which can then be stuffed as desired.
First put the meat through the meat grinder twice before pressing it through1)
the kubbe attachment e.
When you have read and understood all of the instructions on the topic2)
“Kubbe-Attachment”, you can now use the appliance as described in the
chapter “Operating the appliance”.
Making biscuits
After you have made the biscuit pastry according to your recipe, and after having
fixed the biscuit attachment 1:
When you have read and understood all of the instructions on the topic1)
“Biscuits”, you can now use the appliance as described in the chapter
“Operating the appliance”.
Line a small baking tray with greaseproof paper and place or hold it directly2)
under the exit opening at the front of the appliance.
Press pastry evenly into the meat grinder casing3) 5– the transport screw 6
then pushes it through the selected design on the design motif strip of the
biscuit attachnment 1.
When the biscuit is the required length, stop the appliance and break the4)
pastry off at the exit opening. Lay the biscuits on the baking tray.
IB_71981_SFW250B1_LB4.indb 10IB_71981_SFW250B1_LB4.indb 10 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

11
SFW 250 B1
GB
Non-functionality
If the drive is blocked by accumulated food:
Press the button “0” to stop the meat grinder.■
Press and hold the button “<”. The appliance will now run in the reverse■
direction. This enables you to transport the food which has become stuck a
short way backwards, and the motor to run freely again.
When the drive runs smoothly again, release the “<” button.■
Press the button “I” to re-start the meat grinder.■
If you do not succeed in getting the drive free with this, clean the appliance■
as described in the chapter “Cleaning”.
Should the motor suddenly stop, it could be due to auto-
matic activation of the internal overload fuse. This is in-
tended to protect the motor.
Switch the appliance off and allow it cool down for approximately 30 minutes■
before continuing to use it.
Should this not work, wait for a further 15 minutes.■
If it still does not function at the end of this period, this indicates a technical■
problem. In this case, contact the Customer Service Centre.
If the power cable is damaged or the accessories are
visibly damaged:
Immediately switch the appliance off by pressing the “0” button!■
If this is not possible without risk to personal safety, disconnect the plug from■
the mains power socket.
Arrange for the defective parts to be repaired by Customer Services before■
re-using the appliance.
Cleaning
RISK OF ELECTRIC SHOCK
Disconnect the plug from the mains power socket before cleaning the appli-►
ance. In this way accidents caused by the inadvertent switching on of the
appliance and electric shocks can be avoided.
Cleaning the motor block
Clean the exterior surfaces and the power cable with a slighly damp cloth.■
Dry the appliance well before re-using it.
IB_71981_SFW250B1_LB4.indb 11IB_71981_SFW250B1_LB4.indb 11 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

12 SFW 250 B1
GB RISK OF ELECTRIC SHOCK
Never immerse the motor block in water or any other liquid! Should this►
occur, you are at risk of a potentially fatal electric shock if permeating
moisture makes contact with the electrical wiring.
CAUTION - PROPERTY DAMAGE!
Never use detergents, abrasive cleaners or solvents. These could damage►
the appliance and leave residues on the foodstuffs.
Cleaning the accessories
NOTICE
Do not clean the accessories in a dishwasher! This could cause damage to►
them!
Clean the accessories that could come in contact with foodstuff
s, ...■
by hand only, the accessories are not dishwasher safe.–
with hot water and a household detergent suitable for use with foods.–
WARNING! RISK OF INJURY!
The cross blade► 8is very sharp! Risk of injury!
Dry all parts thoroughly, before re-using the appliance.■
After every cleaning, apply a light coating of cooking oil to all metallic■
components.
Storage
Push the power cable (but not the plug) into the cable storage shaft under■
the appliance base. There it is protected from damage.
Store the two cutting discs plates■ 9or the sausage disc w, which are pres-
ently not installed in the appliance, in the small compartment (Fig. ) on the
appliance.
Store the appliance at a dry location.■
After drying the metal attachments coat them lightly with a little cooking oil –■
if you are not going to use the appliance immediately. This will protect them
from corrosion.
Store the appliance where it will be out of reach of children and people■
requiring supervision. They are not always able to correctly assess the
potential risks involved with using electrical appliances.
IB_71981_SFW250B1_LB4.indb 12IB_71981_SFW250B1_LB4.indb 12 08.12.2011 13:47:35 Uhr08.12.2011 13:47:35 Uhr

13
SFW 250 B1
GB
Disposal
Do not dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2002/96/EC (Waste Electrical and Electronic Equipment).
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Observe the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally friendly manner.
Warranty and Service
The warranty for this appliance is for 3 years from the date of purchase. This
appliance has been manufactured with care and meticulously examined before
delivery.
Please retain your receipt as proof of purchase. In the case of a warranty claim,
please make contact by telephone with our service department. Only in this way
can a post-free despatch for your goods be assured.
NOTICE
The warranty covers only claims for material and manufacturing defects, not►
for transport damages, worn parts or for damage to fragile components,
e.g. buttons or batteries.
The appliance is intended for domestic use only, NOT for commercial purposes.
If this product has been subjected to improper or inappropriate handling, abuse,
or modifications not carried out by one of our authorised sales and service
outlets, the warranty will be considered void.
Your statutory rights are not restricted in any way by this warranty. The warranty
period is not extended by repairs effected under warranty. This applies also to
replaced and repaired parts.
Damages or defects discovered after purchase are to be reported directly after
unpacking, at the latest two days after the purchase date.
Repairs carried out after lapse of the warranty period are subject to charge.
The warranty period is not extended by repairs effected under warranty.
This applies also to replaced and repaired parts.
Damages or defects discovered after purchase are to be reported directly after
unpacking, at the latest two days after the purchase date.
Repairs carried out after lapse of the warranty period are subject to charge.
IB_71981_SFW250B1_LB4.indb 13IB_71981_SFW250B1_LB4.indb 13 08.12.2011 13:47:36 Uhr08.12.2011 13:47:36 Uhr

14 SFW 250 B1
GB
14
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: [email protected]
IAN 71981
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
IAN 71981
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
IB_71981_SFW250B1_LB4.indb 14IB_71981_SFW250B1_LB4.indb 14 08.12.2011 13:47:36 Uhr08.12.2011 13:47:36 Uhr

15
SFW 250 B1
GB
Recipes
Kubbe
Ingredients for the wrapping
450 g of lean Lamb, Veal or Beef
150 g Flour
1 Tsp Pimento (type of pepper)
1 Tsp Nutmeg
1 Pinch Chili powder
1 Pinch Pepper
Ingredients for the meat filling
700g Mutton
1 1/2 Tbsp. Olive oil
1 1/2 Tbsp Onions, finely chopped
1/2 Tsp Pimento (type of pepper)
1/2 Tsp. Salt
1 1/2 Tbsp Flour
Pass the meat for the wrapping through the meat grinder twice (first with the
coarse and then with the fine cutting discs 9) and then combine it with the
ingredients. Then pass this mixture through the meat grinder twice. Exchange the
cutting disc 9for the Kubbe attachment e(see chapter " Assembling the kubbe
attachment").
Shape the Kubbe wrappers with the Kubbe attachment eand then freeze them.
Filling:
Pass the meat through the meat grinder twice (first with the coarse and then with
the fine cutting discs 9). Saute the onions and then mix them well with the meat
and other ingredients. Fill the Kubbe wrappers and fry until done.
Alternative Fillings:
250 g steamed Broccoli
or 250 g steamed Zucchini
or 250 g cooked Rice
IB_71981_SFW250B1_LB4.indb 15IB_71981_SFW250B1_LB4.indb 15 08.12.2011 13:47:36 Uhr08.12.2011 13:47:36 Uhr

16 SFW 250 B1
GB
Fresh Grill Sausages
Ingredients:
300 g lean Beef
500 g lean Pork
200 g Shoulder bacon
20 g Salt
1/2 Tbsp ground white Pepper
1 Tsp Caraway
1/2 Tsp Nutmeg
Pass the beef, pork and bacon through the meat grinder twice.
Add the mixed spices and salt and thoroughly knead for 5 minutes.
Place the sausage filling in the refrigerator for ca. 30 minutes. Fill the skins with
sausage meat as detailed (see chapter "Preparing sausage") and make sausages
of ca. 25 cm in length.
Grill the sausages well and eat them on the same day.
Biscuits
Ingredients:
125 g Butter
125 g Sugar
1 packet of Vanilla sugar
1 pinch Salt
1 Egg
1 Egg white
250 g Plain flour
1 Tbsp Baking powder
Scraped peel of half a lemon
Beat the butter until foamy. Add the sugar, vanilla sugar, lemon peel and the
eggs. Mix the flour, baking powder and salt and, with a mixing spoon,stir it into
the mixture. Allow the pastry to stand for ca. 30 minutes in the refrigerator. Then
pass it through the meat grinder with the biscuit attachment 1. Lay the biscuits
on a baking tray lined with baking paper. Bake the biscuits in a pre-heated oven
at 180°C for ca.10-15 minutes until golden brown.
IB_71981_SFW250B1_LB4.indb 16IB_71981_SFW250B1_LB4.indb 16 08.12.2011 13:47:36 Uhr08.12.2011 13:47:36 Uhr

17
SFW 250 B1
PL
Spis treści
Wprowadzenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Informacje o niniejszej instrukcji obsługi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Prawo autorskie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Ograniczenie od odpowiedzialności . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Użycie zgodne z przeznaczeniem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Dane techniczne . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Zakres dostawy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Wskazówki dotyczące bezpieczeństwa. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Składanie / Rozkładanie maszynki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Składanie maszynki. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Zakładanie nasadki do kiełbas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Zakładanie nasadki do pasztecików. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Zakładanie nasadki do ciastek kruchych. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Obsługa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Obsługa urządzenia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Przerabianie mięsa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Przerabianie kiełbas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Zastosowanie nasadki do pasztecików . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Wyrób ciastek kruchych. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Postępowanie w przypadku usterki. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Czyszczenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Czyszczenie bloku silnika . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Czyszczenie akcesoriów . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Przechowywanie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Utylizacja. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Gwarancja i serwis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Importer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Przepisy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Paszteciki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Świeża kiełbaska grillowa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Ciasteczka. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
IB_71981_SFW250B1_LB4.indb Abs2:17IB_71981_SFW250B1_LB4.indb Abs2:17 08.12.2011 13:47:36 Uhr08.12.2011 13:47:36 Uhr

18 SFW 250 B1
PL
Wprowadzenie
Informacje o niniejszej instrukcji obsługi
Niniejsza instrukcja obsługi stanowi część maszynki do mięsa SFW 250 B1
(zwanej dalej urządzeniem) i przekazuje ważne wskazówki dotyczące użytko-
wania zgodnego z przeznaczeniem, bezpieczeństwa, montażu i podłączania,
a także obsługi urządzenia.
Instrukcję obsługi należy przechowywać stale w pobliżu urządzenia. Musi ją
przeczytać, a także jej przestrzegać każdy, kto podejmuje się montażu, obsługi
i usuwania usterek w urządzeniu.
Przechowuj instrukcję obsługi i w razie odsprzedaży urządzenia przekaż ją
wraz z urządzeniem nowemu właścicielowi.
Prawo autorskie
Niniejsza dokumentacja jest prawnie chroniona.
Wszelkiego rodzaju rozpowszechnianie, wzgl. przedruk, odtwarzanie ilustracji,
także w zmienionej postaci, dozwolone wyłącznie za zgodą producenta.
Ograniczenie od odpowiedzialności
Wszystkie zawarte w niniejszej instrukcji obsługi informacje techniczne, dane
i wskazówki montażu, podłączania i obsługi, są zgodne z ostatnim stanem
przekazania do druku i uwzględniają nasze dotychczasowe doświadczenie i
orientację według najnowszej wiedzy.
Na podstawie zawartych tu informacji, ilustracji i opisów nie można wysuwać
żadnych roszczeń.
Producent nie ponosi żadnej odpowiedzialności za szkody spowodowane nie-
przestrzeganiem instrukcji, użytkowaniem urządzenia niezgodnie z przeznacze-
niem, niefachowymi naprawami, niedozwolonymi przeróbkami ani używaniem
niedozwolonych części zamiennych.
Użycie zgodne z przeznaczeniem
Urządzenie jest przeznaczone wyłącznie do przetwarzania żywności w gospo-
darstwie domowym, w ilościach typowych dla gospodarstwa domowego:
do mielenia świeżego mięsa;▯
do wyrabiania kiełbas w osłonce naturalnej lub syntetycznej;▯
do wyrabiania ciasteczek.▯
Urządzenie nie jest przewidziane do przetwarzania mrożonych lub twardych
produktów spożywczych, np. kości lub orzechów, oraz do stosowania w zakła-
dach gastronomicznych i w przemyśle.
IB_71981_SFW250B1_LB4.indb Abs2:18IB_71981_SFW250B1_LB4.indb Abs2:18 08.12.2011 13:47:36 Uhr08.12.2011 13:47:36 Uhr