SilverStone argon series User manual

1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.
Warranty terms & conditions
Additional info & contacts
For North America ([email protected])
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder
of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA
procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only ([email protected])
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)
For Europe ([email protected])
For all other regions ([email protected])
Advanced heatsink with Heat-pipe Direct Contact (HDC) technology
Warranty Information
This product has a limited 1 year warranty in North America, Europe, and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
散熱系統 有毒有害物质/元素及其化学含量表
部件名称
螺絲
風扇
支架(SPCC)
螺柱
鰭片
熱管
支架(SUS304)
墊圈
導熱膏
多溴二苯醚
(PBDE)
多溴联苯
(PBB)
六价铬
(Cr(VI))
镉
(Cd)
汞
(Hg)
铅
(Pb)
○
Χ
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
产品合格证
检验员：检01
生产日期：见产品条码
○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11364-2014
标准规定的限量要求以下。
×：表示该有毒有害物质在该部件材料中的含量超出SJ/T11364-2014标准规定
的限量要求。
本表中有×的部件均符合欧盟RoHS法规，即欧盟第2011/65/EU号指令要求。
Model No.
Material
Application
Heat Pipe Type
Cooling System
Noise level
Bearing Type
Max airflow
Pressure
Rated Voltage
Rated Current
Life Expectance
Speed
Dimension
Net Weight
SST-AR01-V3
Copper heat pipes with aluminum fins
Intel Socket LGA775/1150/1151/1155/1156/1366/2011/2066
AMD Socket AM2/AM3/AM4/FM1/FM2
Ø8mm heat-pipe x 3
120mm x 120mm x 25mm fan
15 ~ 38 dBA
Hydraulic bearing
70.65CFM
3.05mm/H2O
12V
0.25A
40,000 hours
600 ~ 2200RPM
120mm (W) x 50mm (D) x 159mm (H) (with out fan)
420g (with out fan)
Great balance of silence and performance
Three Ø8mm heat-pipes and aluminum fins for excellent heat conducting efficiency
Heat-pipe direct contact (H.D.C.) technology
Innovative anti-vibration fan mountings for easy installation and silent operation
Includes compact 120mm PWM fan for excellent cooling and low noise
Intel Socket LGA775/1150/1155/1156/1366/2011/2066 and AMD Socket AM2/AM3/ AM4/
FM1/FM2 compatible
AR01-V3
NO.G11234490

6將塑膠防震墊片固定到風扇上
将塑料防震垫片固定到风扇上
Secure the anti-vibration rubber mounting onto the fan
Vibrationsdämpfende Gummifassung am Lüfter befestigen
Fan mounting
Fije la goma anti vibración en el ventilador
Fixez le caoutchouc de montage anti vibrations sur le ventilateur
Fissare la gomma anti-vibrazione sulla ventola
防振ゴムパッドをファンに取り付けます
팬 위에 장착되는 방진 고무를 고정합니다
Закрепите антивибрационное крепление на вентиляторе
將風扇的塑膠防震墊片坎入散熱片中
将风扇的塑料防震垫片坎入散热片中
Secure the anti-vibration rubber mounting into the heatsink’s fins
Vibrationsdämpfende Gummifassung an den Lamellen des Kühlkörpers befestigen
Fije la goma anti vibración a las aletas del disipador
Fixez le caoutchouc de montage anti vibrations sur les ailettes du dissipateur
Fissare l’attacco gomma anti-vibrazione sulle alette del dissipatore
防振ゴムパッドをヒートシンクのフィンに取り付けます
방열판의 핀에 장착되는 방진 고무를 고정합니다
Закрепите антивибрационное крепление на ребрах радиатора
2
1
Installation Guide
Package Contents
LGA115X Standoff
LGA2011 Standoff
AM4 Standoff
Hexagon Nut
Thumb Nut
Washer
Back Plate
INTEL Clip
AMD Clip
Rubber Rivet
Thermal Grease
Crossbar
A
B
C
D
E
F
G
H
I
J
K
L
MHexagon Handle
LGA755
LGA1155/1156
AM3/FM2
A
Intel
AMD
AM2 & AM3
B
C
I
F
L
G
A
AM4
B
E
I
F
L
G
LGA2011&2066
G
L
D
H
F
LGA115X
B
C
H
G
L
F
A