SilverStone Argon AR05 User manual

NO.G11221560
2014
Warranty Information
This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.
Warranty terms & conditions
Additional info & contacts
For North America ([email protected])
SilverStone Technology in NorthAmerica may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
in USA by first downloading the “USARMA form for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only ([email protected])
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)
For Europe ([email protected])
For all other regions ([email protected])
ARGON
Advanced low-profile heatsink
with Heat-pipe direct contact
(HDC) technology
AR05 / AR06
SERIES
Designedforlowprofilesystematonly37mmtall
Two Ø6mm heat-pipesandaluminumfinsforexcellentheatconductingefficiency
Heat-pipedirectcontact(HDC)technology
Includescompact92mmPWMfanforexcellentcoolingand low noise
ForusewithCPUsupto65Wormore*
IntelSocketLGA1155/1156/1150 andAMD SocketAM2/AM3/FM1/FM2compatible
*To use onCPUswithTDPgreater than 65W,acase with efficient airflow is required.
*To use onCPUswithTDPgreater than 95W,acase with efficient airflow is required.
Designedforlowprofilesystemat58mmtall
FourØ6mmheat-pipesandaluminumfinsforexcellentheat conducting efficiency
Heat-pipedirectcontact(HDC)technology
Includescompact92mmPWMfanforexcellentcoolingand low noise
ForusewithCPUsupto95Wormore*
IntelSocketLGA1155/1156/1150 andAMD SocketAM2/AM3/FM1/FM2compatible
Special Features & Specification
Material
HeatPipeType
Application
CoolingSystem
Dimension
Copperheatpipeswithaluminumfins
Ø6mmheat-pipex2
IntelSocketLGA1155/1156/1150 /AMD SocketAM2/AM3/FM1/FM2
92mmx92mmx15mmfan
104mm(W)x92mm(D)x36.7mm(H)(with fan)
Material
HeatPipeType
Application
CoolingSystem
Dimension
Copperheatpipeswithaluminumfins
Ø6mmheat-pipex4
IntelSocketLGA1155/1156/1150 /AMD SocketAM2/AM3/FM1/FM2
92mmx92mmx15mmfan
105mm(W)x92mm(D)x58mm(H)(with fan)
AR05
AR06

1
2
3
4
5
6
Instale tornillos hexagonales y las tuercas
correspondientes en los brackets de
montaje
六角ネジおよび対応するナットをマウ
ントブラケットに取り付けます。
Install hex screws and corresponding nuts
onto the mounting brackets Закрепите кронштейны винтами с
шестигранной головкой и
соответствующими гайками
INTEL
LGA 1366
LGA 115X
LGA 775
AMD
Sechskantschrauben und entsprechende
Muttern an den Montagehalterungen
installieren
將扣具鎖上六角螺絲與螺帽，
螺絲孔位需對應主機板類型
Installare le viti esagonali ed i relativi
dadi sulle staffe di montaggio
장착 브래킷 위에 육각 나사와 해당
너트를 설치합니다.
将扣具锁上六角螺丝与螺帽，
螺丝孔位需对应主板类型
Installez les vis hexagonales et les
écrous correspondants sur les supports
de montage
Retire la película protectora de la base
de refrigeración クーラーベースの保護フィルムを剥がします。
Remove protective film from the cooler
base Снимите защитную пленку с
основания теплоотвода
Schutzfolie von der Kühlerbasis
entfernen 將散熱器底部保護貼撕離
Rimuovere la pellicola protettiva dalla
base del dissipatore di calore
쿨러 베이스에서 보호 필름을 제거합니다.
将散热器底部保护贴撕离
Retirez le film protecteur de la base
du refroidisseur
Asegure los brackets montados del paso
1 en la base de refrigeración usando los
tornillos
ステップ1で組まれたブラケットをク
ーラーベースにネジで固定します。
Secure the assembled brackets from step
1 onto the cooler base with screws Закрепите винтами собранные на
шаге 1 кронштейны восновании
теплоотвода
Montierte Halterungen aus Schritt
1 mit Schrauben an der Kühlerbasis
befestigen
將步驟1組好的扣具用螺絲鎖在散熱器底部
Fissare con viti le staffe assemblate
al punto 1 sulla base del dissipatore
di calore
나사를 사용하여 단계 1에서 조립된
브래킷을 쿨러 베이스에 고정합니다.
将步骤1组好的扣具用螺丝锁在散热器底部
Fixez les supports assemblés lors de
l'étape 1 sur la base du refroidisseur
avec des vis
Aplique la pasta térmica de forma
uniforme en la base de refrigeración クーラーベースにサーマルグリスを
均等に塗ります。
Apply included thermal grease onto the
cooler base evenly Ровным слоем нанесите термопасту
на основание теплоотвода
Mitgeliefertes Wärmeleitfett gleichmäßig
auf die Kühlerbasis auftragen 將導熱膏均勻塗抹在散熱器底部
Applicare in modo uniforme il grasso
termico incluso sulla base del dissipatore
di calore
제공된 서멀 그리스를 쿨러 베이스에 고르게
바릅니다.
将导热膏均匀涂抹在散热器底部
Appliquez la pâte thermique fournie
uniformément sur la base du
refroidisseur
Asegure el refrigerador en la placa base
con un espaciador entre la parte trasera
de la placa base y las tuercas
hexagonales
マザーボード裏側とナットの間にスペ
ーサーを挟んで、クーラーをマザーボ
ードに固定します。
Secure cooler onto the motherboard
with spacer between the backside of
motherboard and hex nuts
Закрепите теплоотвод на системной плате
сиспользованием шайбы между задней
стороной системной платы ишестигранными
гайками
Kühler mit Abstandhalter zwischen
Rückseite des Motherboards und
Sechskantmuttern am Motherboard
befestigen
疊上主機板，用六角螺帽與墊片鎖緊
Fissare il dissipatore di calore sulla
scheda madre con un distanziatore tra la
parte posteriore della scheda madre e i
dadi esagonali
메인보드의 뒷면과 육각 너트 사이에
스페이서를 끼운 채 쿨러를 메인보드에
고정합니다.
迭上主板，用六角螺帽与垫片锁紧
Fixez le refroidisseur sur la carte mère
avec une espaceur entre l'arrière de la
carte mère et les écrous hexagonaux
Instalación completa インストール完了
Installation complete Установка завершена
Installation abgeschlossen 安裝完成
L'installazione è completata 설치가 완료되었습니다.
安装完成
Installation terminée