Simplex SafeLINC 4100U Manual

Fire
Australian
Installation
Manual
4100U Fire Indicator Panel
Australian Wiring Diagrams
Australian
Wiring Diagrams
LT0432
Iss 1.04

LT0432 Issue 1.04 13 October 2009 Page ii
Each of these diagrams shows the wiring for a particular module or card
or base which can be used with the AS4428.1 version of the Simplex
4100U Fire Alarm system.
Each diagram has a 3 digit sheet number from the drawing series 1976-
181. This sheet numbering is divided into ranges, reflecting the type of
device or module, as follows:
Sheet Number Type of Devices Covered
100-199 Detectors & Bases
200-299 Zone Modules & Cards providing detection circuits
300-399 Input devices
400-499 Output devices or mixed inputs/outputs
500-599 Fault isolators
600-699 Communications – networks, printers, etc.
700-799 Power Supply details
The sheet index on the next page shows the current issue of each
diagram. The index also refers to some diagrams which have not been
released yet.
IDNet Individual Device Network – latest version of
addressable device communication.
MAPNET Multi-Application Peripheral Network – earlier version of
addressable device communication.
IAM Individually Addressable Module.
ZAM Zone Addressable Module – interfaces to conventional
detectors.
RUI Remote Unit Interface – connects Master panel and Slave
transponders.
RTU Remote Transponder Unit – slave panel
NAC Notification Appliance Circuit – drives DC-powered sounders
and visual warning devices.
General
Organisation
Abbreviations
Amendment
Log
6 Oct. 2006 Issue 1.00 Original
20 Nov. 2006 Issue 1.01 Updated sheets 102, 203, 500
21 June 2007 Issue 1.02 Added sheet 205
10 July 2009 Issue 1.03 Updated sheet 413
13 Oct. 2009 Issue 1.04 Added sheets 701, 703, 704

LT0432 Issue 1.04 13 October 2009 Page iii
Sheet
Number Title Rev.
Bases
101 2W Detector Bases - Conventional Detectors A
102 TrueAlarm Addressable Detector Bases B
Zone Modules
200 8 Zone Module Motherboard (4100-5004) A
201 MapNet Monitor ZAM (2190-9156) A
202 IDNet Zone Addressable Module (ZAM) (4090-
9101) A
203 IDNet Module (4100-3101) B
204 VESDA High Level Interface Nyp
205 4090-9101 ZAM & “Ex” Detectors A
Inputs
300 Addressable Call Point (4099-9032) nyp
301 Supervised IAM (4090-9001, 4090-9051) A
302 4-20mA Analog Monitor ZAM (4090-9050) nyp
Outputs
400 IDNet 6 Point I/O Module (4090-9120) A
401 MapNet2 Relay Module with Supervised Input
(2190-9173) A
402 IDNet Relay IAMs with Inputs (4090-9118, 4090-
9119) B
403 MapNet2 Signal ZAM (2190-9162) and
Control ZAM (2190-9164) A
404 IDNet Relay ZAM (4090-9002) A
405 8 Point Auxiliary Relay Card (4100-3003) A
406 6 Point Signal Card (4100-4321) A
407 SPS NAC Outputs (4100-9848AU) A
408 SPS NAC connection to T-GEN50 tone generator nyp
409 SPS NAC connection to Mini-Gen tone generator A
410 SPS NAC connection to Strobe Driver A
411 SPS Brigade Relays (4100-6033) A
412 IDNet Relay IAMs as Fan Controls B
413 24 Point I/O Card (002-124+4100-0302) B
414 8 Point Relay Card (4100-3206) nyp
415 4 Point Relay Card (4100-3204) nyp
416 Signal IAM (4090-9007) nyp
Isolators
500 IDNet Addressable Loop Isolator (4090-9116) B
501 IDNet Addressable Power Isolator (4090-9117AU) A
Communications
600 Transponder Interface Card (4100-0620) B
601 Network Interface Card (Wired Media) (4100-6014) A
602 Network Interface Card (Fibreoptic) (4100-6014) nyp
603 Fibreoptic Modem - RUI (4100-6063/6064) nyp
604 Fibreoptic Modem - Network (4100-6063/6064) nyp
605 Dual RS232 Card (4100-6038) nyp
606 LCD Annunciator (4604-9201) A
Powe
r
700 SPS Power Outputs B
701 1948 2A PSU Outputs (ME0417) A
703 Remote DC Powered RTU – Loop Power Feed A
704 Remote DC Powered RTU – Linear Power Feed A
Nyp = not yet published
Drawing Index

R
L2
L
L1
R
L2
L
L1
TYCO SAFETY PRODUCTS
NEW ZEALAND.
Safety
Products
[phone]
[phone]PH:
17 MARY MULLER DRIVE
P.O. BOX 19545
FAX:
tyco
CHRISTCHURCH,
4100U
WIRING DIAGRAM
A3 101 N1976-181 A

TYCO SAFETY PRODUCTS
NEW ZEALAND.
Safety
Products
[phone]
[phone]PH:
17 MARY MULLER DRIVE
P.O. BOX 19545
FAX:
tyco
CHRISTCHURCH,
4100U
WIRING DIAGRAM
A3 102 N1976-181 B

TYCO SAFETY PRODUCTS
NEW ZEALAND.
Safety
Products
[phone]
[phone]PH:
17 MARY MULLER DRIVE
P.O. BOX 19545
FAX:
tyco
CHRISTCHURCH,
4100U
WIRING DIAGRAM
A3 200 N1976-181 A

TYCO SAFETY PRODUCTS
NEW ZEALAND.
Safety
Products
[phone]
[phone]PH:
17 MARY MULLER DRIVE
P.O. BOX 19545
FAX:
tyco
CHRISTCHURCH,
4100U
WIRING DIAGRAM
A3 201 N1976-181 A

TYCO SAFETY PRODUCTS
NEW ZEALAND.
Safety
Products
[phone]
[phone]PH:
17 MARY MULLER DRIVE
P.O. BOX 19545
FAX:
tyco
CHRISTCHURCH,
4100U
WIRING DIAGRAM
A3 202 N1976-181 A

TYCO SAFETY PRODUCTS
NEW ZEALAND.
Safety
Products
[phone]
[phone]PH:
17 MARY MULLER DRIVE
P.O. BOX 19545
FAX:
tyco
CHRISTCHURCH,
4100U
IDNET LOOP CARD WIRING
WIRING DIAGRAM
A3 203 N1976-181 B

TYCO SAFETY PRODUCTS
NEW ZEALAND.
Safety
Products
[phone]
[phone]PH:
17 MARY MULLER DRIVE
P.O. BOX 19545
FAX:
tyco
CHRISTCHURCH,
4100U
WIRING DIAGRAM
A3 205 N1976-181 A