SimPure Y7 User manual

As soon as the System connects to power, it will automatically �lush the
membrane for 30 seconds. (Membrane �lushing is internal �lushing, the
�lushed water will return to the feed water tank, no water will come out
of the water spout.)
Filtering - Carefully �it the feed water tank back
into the puri�ier base and close the cover. The
system will automatically start to re�ill the
internal pure water tank. Wait until the �iltering
indicator light turns off (about 10 mins), which
means the inner tank is full.
Empty internal tank to �lush – Press and hold the
Flushing button for 5 seconds, when you hear two
beeps, puri�ied water will start to �low from the
outlet until the internal tank is empty.
Continuerepeating this method until the change
water indicator light starts �lashing, empty the
remaining water in the Feed Water Tank.
Repeat steps 1-4 a further 3-5 times to ensure the
System gets adequately �lushed before use, and
you can dispense andenjoyarefreshing glass of
puri�ied water.
Note: Every water supply is different. Depending
on your feed water sourceand quality, you can
adjust the �lushing frequency.
Do not consume water until �lushing complete.
Filtering
Filtering
IMPORTANT:
ALWAYS FULLY EMPTY THE Y7 FEED WATER TANK BEFORE
REFILLING WITH FRESH POTABLE (TAP) WATER, DO NOT
TRY TO REFILL THE TANK MOUNTED ON THE SYSTEM
(ALWAYS REMOVE IT FIRST).

Dispense more water at once: Push and hold the
Flushing button for 5-seconds; puri�ied water will
start to �low from the outlet until the 0.45-Gallons
internal pure tank empties. To manually stop
dispensing water, push any other button.

Power on - The System will automatically �lush the
membrane for the �irst 30 seconds. While �lushing,
the indicator light will be on.
Manual membrane �lushing - Push the button,
and the System will �lush for 60 seconds and stop.
To cancel the manual �lush, push the button a second
time. While �lushing, the indicator light will be on.
Emptying function - Push and hold the Flushing
button for 5-seconds, You will hear 1-beep, the
Flushing button will �lash; puri�ied water will start to
�low from the outlet until the internal Tank empties.
To manually stop dispensing water, push any other
button, the blue light goes off.
Complete �iltering - The System will automatically
�lush the membrane for 18 seconds after complete
�iltering. While �lushing, the indicator light will be on.
Note: Membrane �lushing is internal �lushing, the
water after �lushing will return to the feed water tank for
circulation, and this will not affect the quality of puri�ied
water after �iltering. Also, no water will �low out of the
water outlet during this process.
Emptying function
Manual
membrane flushing
Filtering- When the system is �iltering the water,
the UV light will always operate to help maintain
microbial control of the puri�ied water.

Filter Replacement
Recommended
Replacement Cycle
6 Months
6 Months

Whole House Filtration System
Under Sink Water Filter System