Simrad SN90 User manual

438850/A
May2018©KongsbergMaritimeAS
SimradSN90
PurseSeineandTrawlingSonar
HarbourAcceptanceTest
ThisistheHarbourAcceptanceTestfortheSimradSN90PurseSeine
andTrawlingSonar.
ThepurposeofthisHarbourAcceptanceTestistoverifythattheSN90
systemprovidedtothevesseliscorrectlyinstalled,andfullyfunctional.
ItisthenreadyfortheSeaAcceptanceTest.Whenallthetaskshave
beendone,thereportformmustbesignedbytherelevantparties.The
completeddocumentthenbecomestheofcialreport.
Vessel/Customer
Serialnumbers(ifapplicable)
ProcessorUnit
OperatingPanel
TransceiverUnit
HullUnit
Transducer

KongsbergMaritimeAS
www.kongsberg.com
Documentinformation
•Product:SimradSN90
•Document:HarbourAcceptanceTest
•Documentpartnumber:438850
•Revision:A
•Dateofissue:9May2018
Copyright
TheinformationcontainedinthisdocumentremainsthesolepropertyofKongsbergMaritimeAS.Nopartof
thisdocumentmaybecopiedorreproducedinanyformorbyanymeans,andtheinformationcontainedwithin
itisnottobecommunicatedtoathirdparty,withoutthepriorwrittenconsentofKongsbergMaritimeAS.
Warning
Theequipmenttowhichthismanualappliesmustonlybeusedforthepurposeforwhichitwasdesigned.
Improperuseormaintenancemaycausedamagetotheequipmentand/orinjurytopersonnel.Y oumustbe
familiarwiththecontentsoftheappropriatemanualsbeforeattemptingtooperateorworkontheequipment.
KongsbergMaritimedisclaimsanyresponsibilityfordamageorinjurycausedbyimproperinstallation,
useormaintenanceoftheequipment.
Disclaimer
KongsbergMaritimeASendeavourstoensurethatallinformationinthisdocumentiscorrectandfairlystated,
butdoesnotacceptliabilityforanyerrorsoromissions.
Supportinformation
Ifyourequiremaintenanceorrepair,contactyourlocaldealer.Youcanalsocontactususingthefollowing
address:[email protected].Ifyouneedinformationaboutourotherproducts,visithttps:
//www.simrad.com.Onthiswebsiteyouwillalsondalistofourdealersanddistributors.

438850/A3
Tableofcontents
INTRODUCTION...........................................................................5
Purpose....................................................................................................................................6
Personnelandlocation............................................................................................................6
Referenceddocuments............................................................................................................6
Toolsandtestequipment........................................................................................................7
ACCEPTANCETESTSUMMARY......................................................8
HARDWAREANDSOFTWAREREGISTRATION..............................9
Vericationofpreviouslytesteditems..................................................................................10
Softwareitems.......................................................................................................................11
Hardwareitems.....................................................................................................................12
Display.........................................................................................................................12
ProcessorUnit.............................................................................................................12
TransceiverUnit..........................................................................................................13
OperatingPanel...........................................................................................................14
HullUnit......................................................................................................................14
Transducer...................................................................................................................15
VISUALINSPECTION.................................................................16
Visualinspectionofthedisplay............................................................................................16
VisualinspectionoftheProcessorUnit................................................................................18
VisualinspectionoftheOperatingPanel..............................................................................20
VisualinspectionoftheTransceiverUnit.............................................................................21
Visualinspectionofthehullunit..........................................................................................23
EnvironmentalinspectionoftheTransceiverUnit...............................................................25
VerifyingthatallSN90cablesareproperlyconnected.........................................................27
TESTINGTHESN90OPERATIONALFUNCTIONALITY.................29
Checkingthetransducerlowerandhoistfunctionality.........................................................30
Checkingthetransducerlowerandhoistfunctionality-Bridgeoperations...............31
Checkingthetransducerlowerandhoistfunctionality-Sonarroom
operations................................................................................................................33
MeasuringtheBITEnoisewiththetransducerdisconnectedfromtheTransceiver
Unit...................................................................................................................................35
MeasuringtheB-ScannoisewiththetransducerdisconnectedfromtheTransceiver
Unit...................................................................................................................................37
Testingtheuserinterfacetoverifybasicfunctionality.........................................................39
HarbourAcceptanceTest

4438850/A
VerifyingSN90operationbymeansoftheBITEfunctionality...........................................40
VerifyingSN90operationbymeansoftheElementBITEfunctionality.............................44
MeasuringtheBITEnoiseinPassivemodewiththetransducerconnectedto
TransceiverUnit...............................................................................................................49
TESTINGTHEINTERFACESWITHPERIPHERALDEVICES...........52
Verifyingthecommunicationwithanavigationsystem(GPS)............................................52
Verifyingthecommunicationwithspeedlog.......................................................................54
Verifyingthecommunicationwiththecoursegyro..............................................................56
Verifyingthecommunicationwiththemotionreferenceunit(MRU).................................58
VERIFYINGTHEINSTALLATIONPARAMETERS..........................61
Verifyingvesseloriginandshipdimensions........................................................................61
Verifyingtheinstallationparametersforthetransducer.......................................................63
Verifyingtheinstallationparametersfortheglobalpositioningsystem(GPS)
antenna.............................................................................................................................64
Verifyingtheinstallationparametersforthemotionreferenceunit(MRU)........................65
CUSTOMERACCEPTANCEFORM.................................................68
SimradSN90

438850/A5
Introduction
Topics
Purpose,page6
Personnelandlocation,page6
Referenceddocuments,page6
Toolsandtestequipment,page7
Introduction

6438850/A
Purpose
ThisistheHarbourAcceptanceTestfortheSimradSN90PurseSeineandTrawlingSonar.
ThepurposeofthisHarbourAcceptanceTestistoverifythattheSN90systemprovidedto
thevesseliscorrectlyinstalled,andfullyfunctional.ItisthenreadyfortheSeaAcceptance
Test.Whenallthetaskshavebeendone,thereportformmustbesignedbytherelevant
parties.Thecompleteddocumentthenbecomestheofcialreport.
Personnelandlocation
Successfulcompletionofthetestrequiresqualiedandexperiencedtestengineersand/or
technicians.
ThisHarbourAcceptanceTestisdoneonboardthevessel,alongsidethequay.Thetestis
donebypersonnelfromKongsbergMaritime.Allpersonnelmusthavegoodknowledge
oftheproductand/ormodule(s)athand.
ArepresentativefromanauthorizeddealerordistributorcandotheHarbourAcceptance
TestonbehalfofKongsbergMaritime.
Representativesfromtheclientand/orenduserarenormallypresenttowitnessthetest
andresults.
Aswithallassemblyandtestproceduresrelatedtoadvancedtechnicaland/orelectronic
equipment,theskilloftheoperatorisvitaltoasuccessfulcompletionofthetasks.Theonly
waytosecurehighqualityofourproductsisrstrateworkmanshipandhighprofessional
standardsthroughouttheproductionchain.
Itisequallyimportantthatallmembersoftheproductionandtestcrewsshowinitiative,and
arewillingtosuggestimprovementstofunctionality,design,proceduresanddocuments.If
youndamistakeinadocument,orndthatinformationismissing,offerthisinformation
totheproperauthoritieswithoutfurtherdelay.Likewise,yourexperienceasaskilledworker
isvaluable.Pleaseforwardanysuggestionstomakeimprovementstotheproduct,the
design,theproductionmethod,oranyothermattersrelatedtoyourexpertise.
Referenceddocuments
TheinstallationandusetheSN90isdescribedinseveraldocumentsandendusermanuals.
InternaltestdocumentsareusedthroughouttheproductionandtestoftheSN90.
Thislistisnotcomplete.Additionaldocumentsandendusermanualsareavailableforthe
SN90.ThesepublicationsarenotrelevantforthisHarbourAcceptanceTest.
SimradSN90HarbourAcceptanceTest

438850/A7
Note
Unlessspeciedintheapplicableprocedure(s),theSN90publicationslistedherearenot
requiredduringthisHarbourAcceptanceTest.
AllthedocumentnumbersrefertotheEnglishversionofeachpublication.
Endusermanuals
•ReferenceManualandOn-lineHelp:381294
•InstallationManual:381298
Softwaredocuments
•SoftwareReleaseNote:429756
Customeracceptancetestprocedures
•FactoryAcceptanceTest:438849
•HarbourAcceptanceTest:438850
•SeaAcceptanceTest:438851
Qualifyingdocuments
•ECDeclarationofConformity:415475
Toolsandtestequipment
SpecictoolsandtestequipmentarerequiredforthisSimradSN90HarbourAcceptance
Test.Therequiredtoolsandequipmentmustbemadeavailablebeforethetestcanstart.
Therequiredtestequipmentislisted.Foreachitem,recordtheinstrument'sserialnumber
and-ifrelevant-itscalibrationexpirydate.
Multimeter(Makeandmodel)SerialnumberCalibration
expirydate
Thefollowingtoolisrequired.
•Allenkey
Introduction

8438850/A
Acceptancetestsummary
ThepurposeofthisHarbourAcceptanceTestistoverifythattheSN90systemprovided
tothevesseliscorrectlyinstalled,andfullyfunctional.Thisacceptancetestsummaryis
providedtoofferanoverviewofthefunctionsanditemsthatneedtobetested.References
aremadetotheindividualchaptersinthisHarbourAcceptanceTest.
Context
Ahullunitmaybeprovidedasanoptionalmethodtolowerandhoistthetransducer.
Note
AllinformationandtasksrelatedtothehullunitmaybedisregardedandomittediftheSN90
isknowntobesuppliedwithoutthisunit.
Procedure
1Recordthesoftwareandhardwareitemsthatareincludedinthetest.
•Hardwareandsoftwareregistration,page9
2DoavisualinspectionofeachunitthatiscomprisedbytheSN90delivery.
•Visualinspection,page16
3TestthemainfunctionalityoftheSN90.
•TestingtheSN90operationalfunctionality,page29
4TesttheinterfacesbetweentheSN90andrelevantexternaldevicesand/orsensors.
•Testingtheinterfaceswithperipheraldevices,page52
5Makesurethatalltherelevantinstallationparametershavebeendenedcorrectly.
•Verifyingtheinstallationparameters,page61
6Whenallthetestshavebeensuccessfullyconcluded,opentheCustomeracceptance
form,andllitinwiththerelevantsignatures.
•Customeracceptanceform,page68
SimradSN90HarbourAcceptanceTest

438850/A9
Hardwareandsoftware
registration
Topics
Vericationofpreviouslytesteditems,page10
Softwareitems,page11
Hardwareitems,page12
Hardwareandsoftwareregistration

10438850/A
Vericationofpreviouslytesteditems
Itisnotnecessarytollinregistrationtablesforsoftwareandhardwareitemsthathave
alreadybeenrecordedinaprevioustest.
AretheSN90userinterfacesoftwareandhardwareunitsthesameasthosetestedduringthe
FactoryAcceptanceTest?Ifthisisthecase,itisnotnecessarytollouttheregistration
tablesagain.
•Ifnochangeshavebeenmadetoneitherthesoftwarenorthehardware,signthetable
belowtoverifythis.
•Ifthesoftwarehasupdated,recordthenewsoftwareversion.
•Ifhardwarechangeshavebeenmade(unitsarereplaced),allserialnumbersmustbe
recordedagain.
Vericationofpreviouslytesteditems
NeitheruserinterfacesoftwarenorhardwareunitshavebeenchangedonthisSN90systemsincetheFactory
AcceptanceTest.Forthisreason,theregistrationtableshavenotbeenlledout.
Dateandsignature
SimradSN90HarbourAcceptanceTest

438850/A11
Softwareitems
EverysoftwareprogramthatisprovidedasapartoftheSN90deliverymustberegistered.
Partnumberandsoftwareversionmustberegistered.Whensoftwaremedia(USBash
drive,CD,DVDetc)isprovided,thepartnumberofthemediaandtheSN90software
versionprovidedonthemediamustberegistered.
SoftwarePartnumberSoftwareversion
SimradSN90382869
SoftwaremediaPartnumberSoftwareversion
SimradSN90Software382870
SimradSN90Endusermanuals385347N/A
Whenapplicable,thesoftwaremediaitemcanbeanymemorydevice(CD,DVD,USBashdrive,etc)
thatcontainstheSN90software.Enduserdocumentationmaybeincludedonthesamesoftwaremedia,or
providedonaseparatedevice.
Hardwareandsoftwareregistration

12438850/A
Hardwareitems
Topics
Display,page12
ProcessorUnit,page12
TransceiverUnit,page13
OperatingPanel,page14
HullUnit,page14
Transducer,page15
Display
EachdisplayprovidedwiththeSN90deliverymustbeuniquelyidentied.Make(s),
model(s),partnumber(s)andserialnumber(s)mustberegistered.Anyunitthatisnot
providedbyKongsbergMaritimeASdoesnotneedtoberegistered.
Display(Makeandmodel)PartnumberSerialnumberRevision
Fillinthemake,modelandserialnumberforeachunitthatisprovidedwiththeSN90delivery.If
applicable,addtheordernumber.Theunitcontainsneithercircuitboardsnormodulesthatneedtobe
identiedseparately.
ProcessorUnit
TheProcessorUnitprovidedwiththeSN90deliverymustbeuniquelyidentied.Make,
model,partnumberandserialnumbermustberegistered.
SimradSN90HarbourAcceptanceTest

438850/A13
ProcessorUnitPartnumberSerialnumberRevision
ProcessorUnit(withSN90software)382908
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
TransceiverUnit
TheTransceiverUnitprovidedwiththeSN90deliverymustbeuniquelyidentied.Make,
model,partnumberandserialnumbermustberegistered.TheTransceiverUnitcontains
circuitboardsandmodulesthatmustberecordedseparately.
SN90TransceiverUnit
TheTransceiverUnitcontrolsthetransmissionandreceptionmadebythe256transmitters
and256receiverchannels.8identicaltransceiverboardsareused.TheTransceiverUnit
alsoholdsanEthernetswitchandalargecapacitorbank.
TransceiverUnitPartnumberSerialnumberRevision
SN90TransceiverUnit383022
Thisunitcontainscircuitboardsormodulesthatmustidentiedseparately.Observetherelevanthardware
registrationtables.
Transceiverboards
Transceiverboards(Fromleft)SerialnumberRevision
1
2
3
4
5
Hardwareandsoftwareregistration

14438850/A
Transceiverboards(Fromleft)SerialnumberRevision
6
7
8
Transceiverboard(Type):LPT32TransceiverBoard
Partnumber:425841
Ethernetswitch
Ethernetswitch(Makeandmodel)PartnumberSerialnumberRevision
HewlettPackardHP3600–24382039
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
OperatingPanel
TheOperatingPanelprovidedwiththeSN90deliverymustbeuniquelyidentied.Make,
model,partnumberandserialnumbermustberecorded.
OperatingPanelPartnumberSerialnumberRevision
SN90OperatingPanelSH8-203593
SN90OperatingPanelPowerSupply361102N/AN/A
Theseunitsdonotcontainanycircuitboardsormodulesthatmustbeidentiedseparately.
HullUnit
Ahullunitmaybeprovidedasanoptionalmethodtolowerandhoistthetransducer.The
hullunitprovidedwiththeSN90deliverymustbeuniquelyidentied.Type,partnumber
andserialnumbermustberegistered.
SimradSN90HarbourAcceptanceTest

438850/A15
HullUnit(Type)PartnumberSerialnumberRevision
HullUnitSN92H424184
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
Transducer
ThetransducerprovidedwiththeSN90deliverymustbeuniquelyidentied.TheSN90
transducerisavailableinfourdifferentversions.Onlytheversionorderedisprovided
withthedelivery.
TransducerPartnumberSerialnumber
TransducerSN90382806
TransducerSN91382811
TransducerSN92382816
TransducerSN93382817
Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
Ahullunitmaybeprovidedasanoptionalmethodtolowerandhoistthetransducer.When
thisoptionisselected,thetransducerisdeliveredreadilymountedatthelowerendofthe
transducershaft.
Hardwareandsoftwareregistration

16438850/A
Visualinspection
Topics
Visualinspectionofthedisplay,page16
VisualinspectionoftheProcessorUnit,page18
VisualinspectionoftheOperatingPanel,page20
VisualinspectionoftheTransceiverUnit,page21
Visualinspectionofthehullunit,page23
EnvironmentalinspectionoftheTransceiverUnit,page25
VerifyingthatallSN90cablesareproperlyconnected,page27
Visualinspectionofthedisplay
AvisualinspectionoftheSN90displayisrequiredtoverifythattheunithasnotbeen
physicallydamagedduringtheinstallation.
Prerequisites
TheSN90isinstalledasspeciedintheSN90Installationmanual.TheSN90isturnedoff.
Youneedthefollowingequipment:
•Multimeter
Context
ThistestprocedureisonlyapplicablewhenthedisplayisprovidedbyKongsbergMaritime
asapartoftheSN90delivery.
SimradSN90HarbourAcceptanceTest

438850/A17
Procedure
1Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
2Makesurethatthephysicalinstallationoftheunithasbeencompleted.
aMakesurethatthestructuretowhichthedisplayisfastenedissubstantialenough
toholdtheunitsecurelyunderalloperatingconditions.
bIfapplicable,makesurethatthedisplay(orthedisplaymountingbracket)is
boltedorweldedsecurelytothedeckand/orbulkhead.
cIftheunitisinstalledinsidearackorinaclosedcompartment,makesurethat
ampleventilationisprovidedtoavoidoverheating.
dMakesurethatamplespaceisprovidedaroundtheunittoallowformaintenance
andreplacementofparts.
eMakesurethatthebolts,screwsorstudsholdingtheunitareofthecorrectsize.
fMakesurethatthecorrectatandshake-proofwashershavebeenused.
gMakesurethatallnutshavebeentightenedproperly.
hMakesurethatallweldsandbracketshavebeenpaintedwiththecorrect
preservationmediumtopreventcorrosion.
3Makesurethatthedisplayisinstalledinthecorrectlocation,andthatitissuitably
orientatedwithrespecttoambientlightconditionsandreections.
4Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
Thephysicalhandlingoftheunitduringtheinstallationmayhavecausedsomeminor
scratchestothepaint-work.Thiscanbeaccepted.However,ifroughhandlinghas
causedseriousdamagetotheunit,thismustberecordedwithawrittenstatementand
necessaryphotos,sothatcorrectiveactionscanbemade.
5Makesurethattheunitisrmlyconnectedtovesselground.
aMakesurethattheunitissecurelyconnectedtothevesselgroundwithanearthing
strap.Thestrapmustbeinadditiontoanyincidentalelectricalcontactmadeby
themountinglugsontheunit.
bUseastandardmultimetertocheckthattheresistancebetweentheunitandthe
ship'sgroundisapproximately0(zero)Ω.
6Makesurethatcableinstallationhasbeencompleted.
aMakesurethatallcablesleadingtoandfromtheunithavebeenproperlymounted
andsecured.
bMakesurethatenoughslackhasbeenprovidedoneachcabletoallowfor
maintenanceandreplacement.
Visualinspection

18438850/A
7Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
Result
RequirementsResults
Thedisplayiscorrectlyinstalledwitheasyaccessformaintenanceand
replacementofparts.
Thedisplayisfreefromscratches,dentsorotherphysicaldamage.
Freeaccesstoalltheconnectorsonthedisplayisprovided.Allcablesare
properlymountedwithenoughslack.
Thedisplayisproperlygrounded.
Dateandsignature:
VisualinspectionoftheProcessorUnit
AvisualinspectionoftheSN90ProcessorUnitisrequiredtoverifythattheunithasnot
beenphysicallydamagedduringtheinstallation.
Prerequisites
TheSN90isinstalledasspeciedintheSN90Installationmanual.TheSN90isturnedoff.
Youneedthefollowingequipment:
•Multimeter
Procedure
1Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
2Makesurethatthecomputerisinstalledinthecorrectlocation,andthatitissuitably
orientedforreplacementandcabling.
3Makesurethatthephysicalinstallationoftheunithasbeencompleted.
aMakesurethatyouhavefreeaccesstorearandfrontsideconnectorsonthe
computerformaintenancepurposes.
bMakesurethatamplespaceisprovidedtoopen/closeDVDand/orCDlids(if
relevant),andtoinsertandremoveUSBashdrives.
cIftheunitisinstalledinsidearackorinaclosedcompartment,makesurethat
ampleventilationisprovidedtoavoidoverheating.
dMakesurethatamplespaceisprovidedaroundtheunittoallowformaintenance
andreplacementofparts.
SimradSN90HarbourAcceptanceTest

438850/A19
eMakesurethatthebolts,screwsorstudsholdingtheunitareofthecorrectsize.
fMakesurethatthecorrectatandshake-proofwashershavebeenused.
gMakesurethatallnutshavebeentightenedproperly.
hMakesurethatallweldsandbracketshavebeenpaintedwiththecorrect
preservationmediumtopreventcorrosion.
4Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
Thephysicalhandlingoftheunitduringtheinstallationmayhavecausedsomeminor
scratchestothepaint-work.Thiscanbeaccepted.However,ifroughhandlinghas
causedseriousdamagetotheunit,thismustberecordedwithawrittenstatementand
necessaryphotos,sothatcorrectiveactionscanbemade.
5Makesurethattheunitisrmlyconnectedtovesselground.
aMakesurethattheunitissecurelyconnectedtothevesselgroundwithanearthing
strap.Thestrapmustbeinadditiontoanyincidentalelectricalcontactmadeby
themountinglugsontheunit.
bUseastandardmultimetertocheckthattheresistancebetweentheunitandthe
ship'sgroundisapproximately0(zero)Ω.
6Makesurethatcableinstallationhasbeencompleted.
aMakesurethatallcablesleadingtoandfromtheunithavebeenproperlymounted
andsecured.
bMakesurethatenoughslackhasbeenprovidedoneachcabletoallowfor
maintenanceandreplacement.
7Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
Result
RequirementsResults
TheProcessorUnitiscorrectlyinstalledwitheasyaccessformaintenanceand
replacementofparts.
TheProcessorUnitisfreefromscratches,dentsorotherphysicaldamage.
FreeaccesstoalltheconnectorsontheProcessorUnitisprovided.Allcables
areproperlymountedwithenoughslack.
TheProcessorUnitcanbefullyopenedforaccesstotheinternalparts.
TheProcessorUnitisproperlyearthed.
Dateandsignature:
Visualinspection

20438850/A
VisualinspectionoftheOperatingPanel
AvisualinspectionoftheOperatingPanelisrequiredtoverifythattheunithasnotbeen
physicallydamagedduringtheinstallation..
Prerequisites
TheSN90isinstalledasspeciedintheSN90Installationmanual.TheSN90isturnedoff.
Youneedthefollowingequipment:
•Multimeter
Procedure
1Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
2Makesurethatthephysicalinstallationoftheunithasbeencompleted.
aIftheunitisinstalledinsidearackorinaclosedcompartment,makesurethat
ampleventilationisprovidedtoavoidoverheating.
bMakesurethatamplespaceisprovidedaroundtheunittoallowformaintenance
andreplacementofparts.
cMakesurethatthebolts,screwsorstudsholdingtheunitareofthecorrectsize.
dMakesurethatthecorrectatandshake-proofwashershavebeenused.
eMakesurethatallnutshavebeentightenedproperly.
3MakesurethattheOperatingPanelisinstalledinthecorrectlocation,andthatitis
suitablyorientedforeasymaintenanceandreplacementofparts.
4Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
Thephysicalhandlingoftheunitduringtheinstallationmayhavecausedsomeminor
scratchestothepaint-work.Thiscanbeaccepted.However,ifroughhandlinghas
causedseriousdamagetotheunit,thismustberecordedwithawrittenstatementand
necessaryphotos,sothatcorrectiveactionscanbemade.
5Makesurethattheunitisrmlyconnectedtovesselground.
aMakesurethattheunitissecurelyconnectedtothevesselgroundwithanearthing
strap.Thestrapmustbeinadditiontoanyincidentalelectricalcontactmadeby
themountinglugsontheunit.
bUseastandardmultimetertocheckthattheresistancebetweentheunitandthe
ship'sgroundisapproximately0(zero)Ω.
6Makesurethatcableinstallationhasbeencompleted.
SimradSN90HarbourAcceptanceTest