Sister Bay MWOOD-CT User manual

Hardware and PartsHardware and Parts
Do not use
any hand drill
on this product
You will also need a phillips-head screwdriver
( not included )
Assembly Instructions
1- Attach part ( C ), Table Legs , to part ( B ), Table Top as shown in Figure 1, see detail 1 place leg notch
over table skirt & slide up against skirt while securing. Secure using ( 16 ) of screw (A) , 4 on each leg,
tighten screws using phillips-head screwdriver. A ttach the remaining legs using the same procedure.
Figure 1
(Table Top)
(Table Legs)
A
(20)
A
1.50
(Table Top)
B
(Table Legs)
(Table Shelf)
C
D
B
C
( Detail 1 )
Item No: MWOOD-CT
Woodlake Coffee Table

2 - Attach part ( D ), Table Shelf , to Assembly from figure 1as shown in figure 2. First align and insert the shelf
into the notch in the leg ( C ) and second press down on the opposite side to lock into place.
Figure 2
( Detail 2 )
Figure 3
3 - To secure the shelf in place, use 4 of screws ( A ) as shown in figure 2 see detail 2, tighten screws using a
phillips-head screwdriver.
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST
(Table Legs)
C
2
1
A
(Table Shelf)
D