Skil 1525 User manual

SKIL Europe BV - Konijnenberg 60 02/06 2609140301
4825 BD Breda - The Netherlands
www.skileurope.com
www.skileurope.com
INSTRUCTIONS page 5
INSTRUCTIONS page 7
HINWEISE Seite 10
INSTRUCTIES bladz. 14
INSTRUKTIONER sida 17
INSTRUKTION side 19
ANVISNING side 22
OHJEET sivu 25
INSTRUCCIONES pág. 28
INSTRUÇÕES pág. 31
ISTRUZIONI pag. 34
LEÍRÁS oldal 37
POKYNY strana 40
KILAVUZ sayfa 43
INSTRUKCJA strona 46
ИНСТРУКЦИИ страница 49
ІНСТРУКЦІЯ страница 53
O∆ΗΓΙΕΣ σελιδα 56
INSTRUCØIUNI pagina 59
YKA3AНИЕ страница 63
POKYNY strana 66
UPUTE stranica 69
UPUTSTVA stranica 72
NAVODILA stran 75
KASUTUSJUHEND lehekülg 78
INSTRUKCIJA lappuse 80
INSTRUKCIJA puslapis 84
GB
F
D
NL
S
DK
N
FIN
E
P
I
H
CZ
TR
PL
RU
UA
GR
RO
BG
SK
HR
SCG
SLO
EST
LV
LT
ME77
PLANER
1525 (F0151525 . . )

2
H
Q
J
NM
A
PL
2
1
1525
750 W
2,8 kg
13000
24
2,5

3
B
G
E
P
F
D
K
B
C
G
3
12
3
4
5
7
6

4
H
5
2610373094
2610373095
2610387871
2610387872
ACCESSORIES SKIL nr.
6
L
4
HSS
TC

Planer 1525
INTRODUCTION
●This tool is intended for planing wooden materials such
as beams and boards; it is also suitable for chamfering
edges and rabbeting
●Read and save this instruction manual
TECHNICAL SPECIFICATIONS 1
TOOL ELEMENTS 23
AStorage for key
BSecuring bolt
CWrench
DClamping element
ECutter block
FSafety bracket
GCutter block screws
HKnob for setting planing depth
JPlaning depth scale
KDust port
LSafety support
MSafety switch
NOn/off switch
PRabbeting depth adjuster
QRip fence
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains operated
(corded) power tool.
1) WORK AREA
a) Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the switch is in the
off position before plugging in. Carrying power tools
with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
GB
5

e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed. Use of the power tool for
operations different from those intended could result in a
hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTIONS FOR PLANERS
●Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
●Always keep the cord away from moving parts of the
tool; direct the cord to the rear away from the tool
●Wait for the cutter block to stop before setting the
tool down (an exposed knife may engage the surface
leading to possible loss of control and serious injury)
●Use completely unrolled and safe extension cords with a
capacity of 16 Amps (UK 13 Amps)
●In case of electrical or mechanical malfunction,
immediately switch off the tool and disconnect the plug
●SKIL can assure flawless functioning of the tool only
when original accessories are used
●This tool should not be used by people under the age of
16 years
●The noise level when working can exceed 85 dB(A);
wear ear protection
●Do not work materials containing asbestos (asbestos
is considered carcinogenic)
●Take protective measures when during work dust
can develop that is harmful to one's health,
combustible or explosive (some dusts are considered
carcinogenic); wear a dust mask and work with dust/chip
extraction when connectable
●If the cord is damaged or cut through while working, do
not touch the cord, but immediately disconnect the plug
●Never use tool when cord is damaged; have it replaced
by a qualified person
●Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool (tools with
a rating of 230V or 240V can also be connected to a
220V supply)
●If any chip should get jammed in the chip outlet, you
should switch off the motor, ensure that all moving parts
have come to a complete standstill, disconnect the plug,
and remove the jammed chip
●Before using the tool check that the knives do not brush
anywhere
●Keep your fingers away from the rotating knives
●Only use high speed steel (HSS) or carbide-tipped (TC)
knife sets with this tool
●Always disconnect plug from power source before
making any adjustment or changing any accessory
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
●Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
●If for any reason the old plug is cut off the cord of this
tool, it must be disposed of safely and not left
unattended
USE
●Changing/reversing knives 3
This planer is equipped with non-grindable knives with
cutting edges on both sides; so if one side has become
blunt, the other side can be used
! switch off the tool and disconnect the plug
- remove guiding devices, if mounted
- take wrench from storage A 2
- turn planer upside down
- loosen 3 bolts B with wrench C (do not remove bolts)
-remove clamping element D from cutter block E while
pushing safety bracket F downwards
- push knife out of clamping element with piece of
wood (for easy removal clean knife first with
petroleum or spirit)
- for mounting a new or reversed knife handle vice-
versa (clean knife and clamping element first)
! ensure that the clamping element rests on side
stop of cutter block
! groove in knife should match ledge in cutter block
! ensure that knife end near safety bracket aligns
with edge of foot (set a ruler flat against housing as
illustrated and use it as a stopper)
- firmly tighten 3 bolts B with wrench C
! change/reverse knives in time; only use sharp
knives
! always change/reverse both knives at the same
time
! do not attempt to adjust the knives with cutter
block screws G, which are pre-set at
manufacturing
●Adjusting planing depth
- turn knob H 2to select required depth by using scale
J 2
- maximum planing depth 2.5 mm
- always select a shallow planing depth and repeat the
planing and adjusting process until the required depth
is reached
●Dust suction
- when planing one may use a dust bag (SKIL
accessory 2610387871)
! do not attempt to remove any obstructions from
the dust port K 3while knives are rotating
6

●Safety support L 4
- protects workpiece from damage when tool is put
aside
- will automatically fold backwards when planing
●Safety bracket F 3
- prevents contact with rotating knife
- opens automatically when planing rabbets
●Operating the tool
- adjust planing depth
- place tool on workpiece
! ensure that only the front shoe rests on the
workpiece and that the knives do not touch it
- switch on the tool by first pressing knob M 2(=
safety switch which cannot be locked) and then
pulling trigger N 2
! before the knives reach the workpiece, the tool
should run at full speed
- hold the tool firmly with both hands and guide it
forward in a continuous stroke
- use the tool with its base-plate on the workpiece
- do not tilt the tool in order to avoid unwanted planing
marks
- keep the ventilation slots uncovered
! before switching off the tool, you should lift it
from the workpiece
- switch off the tool by releasing trigger N
●Planing rabbets
- select required planing depth
- select rabbeting depth by using rabbeting depth
adjuster P 2
- adjust rabbeting width by using rip fence Q 3
- place tool on workpiece
- start planing
- maximum rabbeting width 82 mm
- maximum rabbeting depth 24 mm
APPLICATION ADVICE
●For chamfering edges use the V-groove in the front
shoe 5
- turn knob H to select required depth
- always test out first on a piece of scrap material
●For planing a considerable amount of beams with a
uniform planing depth a plane stand is advised for
stationary use (SKIL accessory 2610387872)
WHEN USING PLANE STAND:
! switch off the tool and disconnect the plug before
using plane stand
- the plane stand is equipped with a switch clamp
allowing the plane to operate independently
- switch on the plane by first pressing knob M 2and
then pushing the clamp over switch N 2
- in order to switch off the plane, pull the cord attached
to the clamp
- the knife protection guard prevents contact with
rotating knife; it will open automatically when pushed
by workpiece
! when planing short, narrow workpieces, use a
pushing device
●For more tips see www.skileurope.com
GUARANTEE / ENVIRONMENT
●Always keep tool and cord clean (especially the
ventilation slots)
! disconnect the plug before cleaning
●This SKIL product is guaranteed in accordance with
statutory/country-specific regulations; damage due to
normal wear and tear, overload or improper handling will
be excluded from the guarantee
●In case of a complaint, send the tool undismantled
together with proof of purchase to your dealer or the
nearest SKIL service station (addresses as well as the
service diagram of the tool are listed on
www.skileurope.com)
●Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 6will remind you of this when the need for
disposing occurs
Rabot 1525
INTRODUCTION
●Cet outil est conçu pour le rabotage des matériaux en
bois, tels que des poutres et des plances; il est
également approprié pour chanfreiner et pour faire des
feuillures
●Lisez et conservez ce manuel d'instruction
SPECIFICATIONS TECHNIQUES 1
ELEMENTS DE L'OUTIL 23
ARangement pour la clé
BBoulon de fixation
CClé
DElément de serrage
EArbre porte-couteaux
FPatte de sécurité
GVis de l'arbre porte-couteaux
HBouton de réglage de la profondeur de rabotage
JÉchelle de la profondeur de rabotage
KSortie poussière
LAppui de sécurité
MInterrupteur de sécurité
NInterrupteur marche/arrêt
PGuide de profondeur de feuillure
QGuide parallèle
F
7

✎
87

✎
88

✎
89

90
CE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following
standards or standardized documents: EN 50 144, EN 55 014, in accordance with the provisions of the directives 73/23/EC,
89/336/EC, 98/37/EC.
NOISE/VIBRATION Measured in accordance with EN 50 144 the sound pressure level of this tool is 87 dB(A), the sound power level
100 dB(A), and the vibration < 2.5 m/s2(hand-arm method).
CE DÉCLARATION DE CONFORMITÉ Nous déclarons sous notre propre responsabilité que ce produit est en conformité avec les
normes ou documents normalisés suivants: EN 50 144, EN 55 014, conforme aux réglementations 73/23/EC, 89/336/EC, 98/37/EC.
BRUIT/VIBRATION Mesuré selon EN 50 144 le niveau de la pression sonore de cet outil est 87 dB(A), le niveau de la puissance
sonore 100 dB(A), et la vibration < 2,5 m/s2(méthode main-bras).
CE KONFORMITÄTSERKLÄRUNG Wir erklären in alleiniger Verantwortung, daß dieses Produkt mit den folgenden Normen oder
normativen Dokumenten übereinstimmt: EN 50 144, EN 55 014, gemäß den Bestimmungen der Richtlinien 73/23/EG, 89/336/EG,
98/37/EG.
GERÄUSCH/VIBRATION Gemessen gemäß EN 50 144 beträgt der Schalldruckpegel dieses Gerätes 87 dB(A), der
Schalleistungspegel 100 dB(A), und die Vibration < 2,5 m/s2(Hand-Arm Methode).
CE CONFORMITEITSVERKLARING Wij verklaren, dat dit product voldoet aan de volgende normen of normatieve documenten:
EN 50 144, EN 55 014, overeenkomstig de bepalingen van de richtlijnen 73/23/EG, 89/336/EG, 98/37/EG.
GELUID/VIBRATIE Gemeten volgens EN 50 144 bedraagt het geluidsdrukniveau van deze machine 87 dB(A), het geluidsvermogen-
niveau 100 dB(A), en de vibratie < 2,5 m/s2(hand-arm methode).
CE KONFORMITETSFÖRKLARING Vi intygar och ansvarar för, att denna produkt överensstämmer med följande norm och
dokument: EN 50 144, EN 55 014, enl. bestämmelser och riktlinjema 73/23/EG, 89/336/EG, 98/37/EG.
LJUD/VIBRATION Ljudtrycksnivån som uppmätts enligt EN 50 144 är på denna maskin 87 dB(A), ljudeffektnivån 100 dB(A), och
vibration < 2,5 m/s2(hand-arm metod).
CE KONFORMITETSERKLÆRING Vi erklærer under almindeligt ansvar, at dette produkt er i overensstemmelse med følgende
normer eller normative dokumenter: EN 50 144, EN 55 014, i henhold til bestemmelserne i direktiverne 73/23/EF, 89/336/EF,
98/37/EF. STØJ/VIBRATION Måles efter EN 50 144 er lydtrykniveau af dette værktøj 87 dB(A), lydeffektniveau
100 dB(A), og vibrationsniveauet < 2,5 m/s2(hånd-arm metoden).
CE SAMSVARSERKLÆRING Vi erklærer at det er under vårt ansvar at dette produkt er i samsvar med følgende standarder eller
standard- dokumenter: EN 50 144, EN 55 014, i samsvar med reguleringer 73/23/EF, 89/336/EF, 98/37/EF.
STØY/VIBRASJON Målt ifølge EN 50 144 er lydtrykknivået av dette verktøyet 87 dB(A), lydstyrkenivået 100 dB(A), og
vibrasjonsnivået < 2,5 m/s2(hånd-arm metode).
CE TODISTUS STANDARDINMUKAISUUDESTA Todistamme täten ja vastaamme yksin siitä, että tämä tuote en allalueteltujen
standardien ja standardoimisasiakirjojen vaatimusten mukainen EN 50 144, EN 55 014, seuraavien sääntöjen mukaisesti 73/23/ETY,
89/336/ETY, 98/37/ETY. MELU/TÄRINÄ Mitattuna EN 50 144 mukaan työkalun melutaso on 87 dB(A), yleensä työkalun äänen
voimakkuus on 100 dB(A), ja tärinän voimakkuus < 2,5 m/s2(käsi-käsivarsi metodi).
CE DECLARACION DE CONFORMIDAD Declaramos bajo nuestra sola responsabilidad que este producto está en conformidad
con las normas o documentos normalizados siguientes: EN 50 144, EN 55 014, de acuerdo con las regulaciones 73/23/CE,
89/336/CE, 98/37/CE.
RUIDOS/VIBRACIONES Medido según EN 50 144 el nivel de la presión acústica de esta herramienta se eleva a 87 dB(A), el nivel
de la potencia acústica 100 dB(A), y la vibración a < 2,5 m/s2(método brazo-mano).
CE DECLARAÇÃO DE CONFIRMIDADE Declaramos sob nossa exclusiva responsabilidade que este producto cumpre as
seguintes normas ou documentos normativos: EN 50 144, EN 55 014, conforme as disposições das directivas 73/23/CE, 89/336/CE,
98/37/CE. RUÍDO/VIBRAÇÕES Medido segundo EN 50 144 o nível de pressão acústica desta ferramenta é 87 dB(A),
o nível de potência acústica 100 dB(A), e a vibração < 2,5 m/s2(método braço-mão).
GB
F
D
NL
S
DK
N
FIN
E
P
06 SKIL Europe B.V. A. v.d. Kloot
CE DICHIARAZIONE DI CONFORMITÀ Dichiaramo, assumendo la piena responsabilità di tale dichiarazione, che il prodotto è
conforme alle seguenti normative e ai relativi documenti: EN 50 144, EN 55 014 in base alle prescrizioni delle direttive CE 73/23,
CE 89/336, CE 98/37.
RUMOROSITÀ/VIBRAZIONE Misurato in conformità al EN 50 144 il livello di pressione acustica di questo utensile è 87 dB(A), il
livello di potenza acustica 100 dB(A), e la vibrazione < 2,5 m/s2(metodo mano-braccio).
I
CE MINÖSÉGI TANUSITVANY Teljes felelösségünk tudatában kijelentjük, hogy jelen termék a következö szabványoknak vagy
kötelezö hatósági elöírásoknak megfelel: EN 50 144, EN 55 014, a 73/23/EK, 89/336/EK, 98/37/EK elöírásoknak megfelelöen.
ZAJ/REZGÉS Az EN 50 144 alapján végzett mérések szerint ezen készülék hangnyomás szintje 87 dB(A), hangteljesítmény szintje
100 dB(A), a kézre ható rezgésszám < 2,5 m/s2.
H
CE STRVZUJÍCÍ PROHLÅ◊ENÍ Potvrzujeme na odpovπdnost, Ωe tento v¥robek odpovídå nåsledujícím normåm nebo normativním
podkladüm: EN 50 144, EN 55 014, podle ustanovení smπrnic 73/23/EG, 89/336/EG, 98/37/EG.
HLUÇNOSTI/VIBRACÍ Mπ®eno podle EN 50 144 çiní tlak hlukové vlny tohoto p®ístroje 87 dB(A),dávka hluçnosti 100 dB(A), a vibrací
< 2,5 m/s2(metoda ruka-paΩe).
CZ
CE STANDARDIZASYON BEYANI Ye¤ane sorumlu olarak, bu ürünün afla¤ıdaki standartlara veya standart belgelerine uygun
oldu¤unu beyan ederiz: EN 50 144, EN 55 014, yönetmeli¤i hükümleri uyarınca 73/23/EC, 89/336/EC, 98/37/EC.
GÜRÜLTÜ//T‹TREfiIM Ölçülen EN 50 144 göre ses basıncı bu makinanın seviyesi 87 dB(A), çal›flma s›ras›ndaki gürültü
100 dB(A), ve titreflim < 2,5 m/s2(el-kol metodu).
TR

91
06 SKIL Europe B.V. A. v.d. Kloot
ЗАЯВЛЕНИЕ О СООТВЕТСТВИИ Мы с полной ответственностыо заявляем, что это изделие соответствует следующим
стандартам или стандартизованным документам: EN 50 144, EN 55 014, в соответсувии с инструкциями 73/23/EC,
89/336/EC, 98/37/EC. ШУМНОСТИ/ВИБРАЦИИ При измерении в соответствии co стандартoм EN 50 144 уровень звукового
давления для этого инструмента составляет 87 дБ (A), уровeнь звуковой мощности - 100 дБ (A), и вибрации -
< 2,5 м/с2(по методу для рук).
RU
CE ВІДПОВІДНІСТЬ Ми заявляємо, що відповідність даного продукту наступним стандартам і регулюючим документам
повністю нашою відповідальністю: EN 50 144, EN 55 014, відповідно до положень директив 73/23/ЄС, 89/336/ЄС, 98/37/ЄС.
ШУМ/ВІБРАЦІЯ Зміряний відповідно до EN 50 144 рівень тиску звуку даного інструменту 87 дБ(А), потужність звуку 100
дБ(А), i вібрація < 2,5 м/с2(ручна методика).
UA
CE ∆ΗΛΩΣΗ ΣYMBATOTΗΤΑΣ ∆ηλούµε υπευθύνως τι το προϊν αυτ είναι κατασκευασµένο σύµφωνα µε τους εξής
κανονισµούς ή κατασκευαστικές συστάσεις: EN 50 144, EN 55 014, κατά τις διατάξεις των κανονισµών της Κοινής Αγοράς
73/23/EK, 89/336/EK, 98/37/EK. ΘΟΡYΒΟ/ΚΡΑ∆ΑΣΜΟYΣ Μετρηµένη σύµφωνα µε EN 50 144 η στάθµη ακουστικής πίεσης
αυτού του εργαλείου ανέρχεται σε 87 dB(A),η στάθµη ηχητικής ισχύoς σε 100 dB(A), και ο κραδασµς σε < 2,5 m/s2
(µεθοδος χειρς/βραχίονα).
GR
DECLARAØIE DE CONFORMITATE CE Declaråm pe proprie råspundere cå acest product este conform cu urmåtoarele standarde
sau documente standardizate: EN 50 144, EN 55 014, în conformitate cu regulile 73/23/EC, 89/336/EC, 98/37/EC.
ZGOMOT/VIBRAØII Måsurat în conformitate cu EN 50 144 nivelul de presiune a sunetului generat de acest instrument este de
87 dB(A),nivelul de putere a sunetului 100 dB(A), iar nivelul vibraøiilor < 2,5 m/s2(metoda mînå - braø).
RO
CE ДЕKЛАPAЦИЯ ЗA CБOTВETCTBИE Декларираме на изцяло наша отговорност, че това изделие е съобразено със
следните стандарти или стандартизирани документи: EN 50 144, EN 55 014, в съответствие с нормативната уредба на
73/23/EG, 89/336/EG, 98/37/EG.
ШУМ/ВИБPAЦИИ Измерено в съответствие с EN 50 144 нивото на звуково налягане на този инструмент е 87 dB(A),нивото
на звукова мощност е 100 dB(A), а вибрациите са < 2,5 m/s2(метод ръка-рамо).
BG
CE IZJAVA O USKLA ĐENOSTI Izjavljujemo uz punu odgovornost da je ovaj proizvod usklađen sa slijedeçim normama i
normativnim dokumentima: EN 50 144, EN 55 014, prema odredbama smjernica 73/23/EG, 89/336/EG, 98/37/EG.
BUCI/VIBRACIJAMA Mjereno prema EN 50 144, prag zvuãnog tlaka ovog elektriãnog alata iznosi 87 dB(A), jakost zvuka
100 dB(A), a vibracija < 2,5 m/s2(postupkom na ‰aci-ruci).
HR
CE IZJAVA O USKLA ĐENOSTI Pod punom odgovorno‰çu izjavljujemo da je ovaj proizvod usklađen sa sledeçim standardima ili
standardizovanim dokumentima: EN 50 144, EN 55 014, u skladu sa odredbama smernica 73/23/EG, 89/336/EG, 98/37/EG.
BUKA/VIBRACIJE Mereno u skladu sa EN 50 144, nivo pritiska zvuka ovog alata iznosi 87 dB(A), jaãina zvuka
100 dB(A), a vibracija < 2,5 m/s2(mereno metodom na ‰aci-ruci).
SCG
IZJAVA O USTREZNOSTI CE Odgovorno izjavljamo, da je ta izdelek v skladu z naslednjimi standardi ali standardnimi dokumenti:
EN 50 144, EN 55 014, v skladu s predpisi navodil 73/23/EG, 89/336/EG, 98/37/EG.
HRUP/VIBRACIJA Izmerjeno v skladu s predpisom EN 50 144 je raven zvoãnega pritiska za to orodje 87 dB(A), jakosti zvoka
100 dB(A), in vibracija < 2,5 m/s2 (metoda ‘dlan-roka’).
SLO
CE VASTAVUSDEKLARATSIOON Kinnitame ainuvastutajana, et see toode vastab järgmistele standarditele või
normdokumentidele: EN 50 144, EN 55 014 vastavalt direktiivide 73/23/EÜ, 89/336/EÜ, 98/37/EÜ nõuetele.
MÜRA/VIBRATSIOON Vastavalt kooskõlas normiga EN 50 144 läbi viidud mõõtmistele on antud seadme helirõhk 87 dB(A),
helitugevus 100 dB(A), ja vibratsioon < 2,5 m/s2(käe-randme-meetod).
EST
CE DEKLARÅCIJA PAR ATBILST±BU STANDARTIEM Mïs ar pilnu atbild¥bu pazi¿ojam, ka ‰is izstrÇdÇjums atbilst standartiem vai
standartizÇcijas dokumentiem EN 50 144, EN 55 014 un ir saska¿Ç ar direkt¥vÇm 73/23/EG, 89/336/EG, 98/37/EG.
TROKSNIS/VIBRÅCIJA Saska¿Ç ar standartu EN 50 144 noteiktais instrumenta rad¥tÇ trok‰¿a ska¿as spiediena l¥menis ir
87 dB(A), ska¿as jaudas l¥menis ir 100 dB (A), un vibrÇcijas intensitÇte ir < 2,5 m/s2(strÇdÇjot rokas reÏ¥mÇ).
LV
CE KOKYBñS ATITIKTIES DEKLARACIJA Mes atsakingai parei‰kiame, kad ‰is gaminys atitinka tokius standartus ir normatyvinius
dokumentus: EN 50 144, EN 55 014 pagal EEB reglament˜ 73/23/EG, 89/336/EG, 98/37/EG nuostatas.
TRIUK·MINGUMAS/VIBRACIJA ·io prietaiso triuk‰mingumas buvo i‰matuotas pagal EN 50 144 reikalavimus keliamo triuk‰mo
garso slògio lygis siekia 87 dB(A), akustinio galingumo lygis 100 dB(A), ir vibracijos pagreitis rankos pla‰takos srityje tipiniu atveju yra
maÏesnis, kaip < 2,5 m/s2.
LT
CE PREHLÁSENIE O ZHODE Vÿhradne na na√u vlastnú zodpovednos† prehlasujeme, Ωe tento vÿrobok zodpovedá nasledujúcim
normám alebo normovanÿm dokumentom: EN 50 144, EN 55 014, v súlade s predpismi 73/23/EC, 89/336/EC, 98/37/EC.
HLUKU/VIBRÁCIÁCH Merané pod¬a EN 50 144 je úroveµ akustického tlaku tohto nástroja 87 dB(A), úroveµ akustického vÿkonu je
100 dB(A) a vibrácie sú < 2,5 m/s2(metóda ruka - paΩa).
SK
OÂWIADCZENIE ZGODNOÂCI CE Niniejszym oÊwiadczamy ponoszàc osobistà odpowiedzialnoÊç, ˝e produkt wykonany jest zgodnie
z nast´pujàcymi normami i dokumentami normalizujàcymi: EN 50 144, EN 55 014, z godnie z wytycznymi 73/23/WE, 89/336/WE,
98/37/WE. HA¸ASU/WIBRACJE Pomiarów dokonano zgodnie z normà EN 50 144 ciÊnienie akustyczne narz´dzia wynosi 87 dB(A),
poziom mocy akustycznej 100 dB(A), zaÊ wibracje < 2,5 m/s2(metoda d∏oƒ-r´ka).
PL